IKEA HEMNES 502.236.25 Bench instructions manual

The IKEA HEMNES 502.236.25 Bench is a versatile and sturdy wooden bench designed for indoor use. It features a classic Scandinavian design with solid wood construction, a smooth painted finish, and a spacious seating area. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Care & Maintenance 6. Warranty Information 7. Troubleshooting

Parts & Hardware

Before assembly, check that you have all parts listed below. All hardware is included in the package.

Part Name	Quantity	Description
Bench Seat	1	Main seating board with pre-drilled holes
Bench Legs	4	Solid wood legs with mounting plates
Support Rails	2	Cross braces for stability
Wooden Dowels	8	8mm diameter, for joining parts
Cam Lock Nuts	4	For securing legs to seat
Screws	16	Various sizes for assembly
Allen Key	1	Tool for tightening screws
Instruction Manual	1	This document

Safety Information

Read all instructions before assembly. Keep children and pets away during assembly.

Assemble on a soft, clean surface to avoid scratches.
Use only the provided tools and hardware.
Ensure all screws and fittings are tightened securely.
Do not stand or jump on the bench.

WARNING! Furniture can tip over. Secure to wall if possible, especially in households with children. Maximum load: 220 lbs (100 kg) distributed evenly.

Assembly Instructions

Follow steps in order. Allow 30-45 minutes for assembly.

Prepare Workspace: Unpack all parts and lay them on a clean, flat surface.
Attach Legs to Seat: Insert wooden dowels into holes on underside of seat. Align legs and press firmly. Secure with cam lock nuts using Allen key.
Install Support Rails: Position rails between legs at designated points. Attach using provided screws.
Final Tightening: Check all connections. Tighten screws and cam locks fully.
Place Bench: Move bench to desired location. Ensure it sits level on floor.

CAUTION! Do not overtighten screws as this may strip the wood. Assemble with a partner for easier handling.

Specifications

Product Name: HEMNES Bench
Article Number: 502.236.25
Color: White Stain
Material: Solid wood, Particleboard, Fiberboard, Acrylic paint
Dimensions: Length: 47 ¼" (120 cm), Width: 16 ½" (42 cm), Height: 18 ½" (47 cm)
Seat Height: 18 ½" (47 cm)
Weight Capacity: 220 lbs (100 kg)
Package Weight: 28.7 lbs (13 kg)

Care & Maintenance

To maintain appearance and longevity, clean regularly with a soft, damp cloth. Avoid abrasive cleaners.

For painted surface: Wipe with mild soapy water, then dry immediately. Do not use solvents.

For wood: Protect from direct sunlight and heat sources to prevent fading or warping.

CAUTION! Do not place near radiators or in humid areas like bathrooms. Never soak or submerge in water.

Warranty Information

IKEA warrants this product against manufacturing defects for a period of 10 years from date of purchase, under normal household use and following assembly/ care instructions. Warranty does not cover damage from accidents, misuse, improper assembly, or commercial use. For warranty service, contact IKEA customer service with your receipt and article number.

Troubleshooting

Issue	Possible Cause	Solution
Bench wobbles	Uneven floor or loose screws	Tighten all screws and cam locks. Place on level surface.
Legs not aligning	Dowels not fully inserted	Remove leg, ensure dowels are pressed completely into seat holes.
Scratches on surface	Assembly on hard surface	Assemble on carpet or blanket. Use touch-up paint if provided.
Missing hardware	Packaging error	Contact IKEA for replacement parts (provide article number).
Paint chipping	Impact or sharp objects	Handle with care. Small chips can be touched up with matching paint.

Customer Support: Visit www.ikea.com or call 1-888-888-4532 for assistance with assembly, parts, or returns.