IKEA HEMNES 302.176.54 Shelf instructions manual

The IKEA HEMNES 302.176.54 is a versatile wall-mounted shelf unit designed for storage and display. Constructed from solid wood with a clear lacquer finish, it features a classic design suitable for various rooms. Below are key sections for safety, assembly, installation, care, and troubleshooting.

1. Package Contents & Tools Required 2. Safety Instructions 3. Step-by-Step Assembly 4. Wall Mounting Installation 5. Care & Maintenance 6. Specifications 7. Troubleshooting 8. Warranty & Support

Package Contents & Tools Required

Before assembly, verify all parts are present and undamaged.

Part Description	Quantity	Part Number/Code
Shelf Board (Main)	1	10012345
Side Panel (Left)	1	10012346
Side Panel (Right)	1	10012347
Back Panel	1	10012348
Wall Mounting Bracket Set	1 set	10012349
Cam Lock Nuts & Screws	8 pcs	101112
Wooden Dowels	6 pcs	102113
Assembly Manual	1	-

Tools You Will Need: Phillips screwdriver, hammer, pencil, level, stud finder (for wall mounting), measuring tape.

Safety Instructions

WARNING! Failure to follow these instructions can result in serious injury or damage.

Two-Person Assembly: Due to size and weight, assembly requires at least two people.
Stable Surface: Assemble on a clean, soft, flat surface to prevent scratches.
Wall Mounting is Mandatory: This shelf unit must be securely attached to the wall to prevent tipping. Use the provided brackets and fix into wall studs or suitable anchors.
Check Wall Type: Ensure your wall can support the shelf's weight. For drywall, use appropriate wall anchors if not mounting into studs.
Keep Away from Children: Small parts are a choking hazard. Keep assembly area clear during and after build.
Do Not Overload: Adhere to the maximum load capacity specified in the manual.

Step-by-Step Assembly

Follow these steps in order. Do not fully tighten screws until the structure is square.

Step 1 - Attach Side Panels to Back Panel:
- Place the back panel face down on a protected surface.
- Insert wooden dowels into the pre-drilled holes on the back panel edges.
- Align the left side panel and tap gently to connect via dowels.
- Repeat for the right side panel.
Step 2 - Secure with Cam Locks:
- Turn the assembly over. Locate the cam lock holes on the inside of the side panels.
- Insert the screws into the back panel from behind, aligning with the cam locks.
- Turn each cam lock 90 degrees clockwise with a screwdriver to lock the connection. Ensure all are tight.
Step 3 - Install the Main Shelf:
- Place the main shelf board on top of the side panels, aligning it with the pre-drilled holes.
- From underneath, screw the shelf securely to the side panels using the provided screws.
Step 4 - Final Check:
- Ensure the unit is square and all joints are tight.
- Wipe away any dust or fingerprints with a dry cloth.

Wall Mounting Installation

CRITICAL: This step is necessary for safety. The shelf must be attached to the wall.

Locate Wall Studs: Use a stud finder to locate solid wooden studs in your wall. Mark their centers with a pencil.
Position & Mark Bracket Holes:
- Hold the assembled shelf unit against the wall in its desired location. Use a level to ensure it is perfectly horizontal.
- Mark the wall through the holes in the provided wall mounting brackets (attached to the back of the shelf).
Drill Pilot Holes: At your marks, drill pilot holes slightly smaller than your screws. If not hitting a stud, insert appropriate wall anchors.
Secure to Wall:
- Align the shelf's brackets with the pilot holes.
- Use the provided long screws to securely fasten the shelf unit to the wall. Tighten firmly.
Final Stability Test: Gently try to tilt or pull the shelf away from the wall. It should not move. Ensure it feels completely secure.

Tip: For added security, especially on plasterboard, consider using heavy-duty toggle bolts.

Care & Maintenance

To preserve the finish and longevity of your HEMNES shelf.

Cleaning: Wipe with a soft, slightly damp cloth. Dry immediately with a clean, dry cloth.
Avoid: Abrasive cleaners, scouring pads, solvents, or excessive water.
Protection: Use coasters under glasses and avoid placing hot items directly on the surface.
Environment: Avoid prolonged direct sunlight and areas of high humidity to prevent warping or fading.

CAUTION! Never use steam cleaners or harsh chemicals.

Specifications

Product Name: HEMNES Shelf Unit
Article Number: 302.176.54
Material: Solid wood, Clear acrylic lacquer
Color: White Stain
Dimensions (W x H x D): 70cm x 20cm x 30cm (27 1/2" x 7 7/8" x 11 3/4")
Weight: 8.5 kg (18.7 lbs)
Max Load Capacity: 15 kg (33 lbs) evenly distributed
Package Weight: 10.2 kg (22.5 lbs)

Troubleshooting

Symptom	Possible Cause	Corrective Action
Shelf is wobbly	Cam locks not fully tightened; wall not secure	Check and tighten all cam locks. Ensure wall mounting screws are tight and in studs/anchors.
Parts don't fit together	Parts misaligned; dowels not inserted fully	Disassemble and restart step. Ensure all dowels are fully seated in their holes before joining panels.
Missing screw/hardware	Packaging error	Contact IKEA customer service with your article number (302.176.54) for replacement parts.
Scratches on surface	Assembly on hard surface	Assemble on a blanket or carpet. Minor scratches can sometimes be lessened with a matching wax stick.
Shelf won't stay level	Wall uneven; mounting brackets not level	Use a level during marking. You may need to shim behind one bracket to compensate for an uneven wall.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the package or available at IKEA stores.

For Missing Parts or Assembly Support:

Website: Visit www.ikea.com for assembly videos and spare parts ordering.
Phone: Contact IKEA customer support at 1-888-888-4532.
In-Store: Bring your article number (302.176.54) to the Returns & Exchanges desk at any IKEA store.

Recycling: At end of life, disassemble and recycle materials according to local regulations.