IKEA HEMNES 293.884.25 High Cabinet instructions manual

The IKEA HEMNES 293.884.25 is a high cabinet from the HEMNES series, featuring a classic design with panel doors and adjustable shelves. Constructed from solid wood and wood-based materials, it requires assembly. Below are key sections for safety, parts list, assembly instructions, installation, care, and troubleshooting.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Installation & Mounting 5. Adjustments & Features 6. Care & Maintenance 7. Specifications 8. Warranty Information 9. Troubleshooting

Parts & Hardware

Before assembly, verify all parts are present. Key components: Cabinet frame, doors, shelves, hinges, screws, cam locks, dowels, and mounting hardware.

Part Number	Description	Quantity
A1-A4	Side panels	4
B1-B2	Top and bottom panels	2
C1-C2	Doors with pre-drilled hinge holes	2
D1-D3	Adjustable shelves	3
E1-E8	Cam locks and screws	8 sets
F1-F12	Dowels	12
G1-G4	Hinges with mounting screws	4 sets
H1-H2	Door handles	2
I1	Wall attachment bracket	1

Safety Instructions

Read all instructions before assembly. Use proper tools and follow steps in order.

Assemble on a soft, clean surface to avoid scratches.
Use included Allen key and screwdriver; avoid over-tightening.
For stability, always attach cabinet to wall using provided bracket.
Do not place heavy objects on top that exceed weight limits.
Keep small hardware away from children to prevent choking.

WARNING! Cabinet is heavy; lift with care and use two people. Ensure wall mounting is secure to prevent tipping.

Assembly Steps

Follow numerical order on instruction sheets. Estimated assembly time: 60-90 minutes.

Frame Assembly: Connect side panels (A) to top and bottom panels (B) using dowels (F) and cam locks (E). Tighten with Allen key.
Back Panel: Insert back panel into grooves; secure with provided nails or screws.
Shelves: Insert shelf pins at desired heights; place shelves (D) onto pins.
Door Installation: Attach hinges (G) to doors (C) using screws. Mount doors to cabinet frame; adjust alignment with screwdriver.
Handles: Screw handles (H) onto doors as per design.
Final Check: Ensure all screws and cam locks are tight; doors open and close smoothly.

Tip: Keep doors and shelves aside until frame is fully assembled to avoid damage.

Installation & Mounting

To prevent tipping, cabinet must be anchored to wall.

Position cabinet against wall in desired location.
Locate wall studs using stud finder; mark positions.
Attach bracket (I) to cabinet back using provided screws.
Secure bracket to wall studs with suitable screws (not included for all wall types).
Check stability by gently pulling top of cabinet.

CAUTION! If not mounted properly, cabinet can tip over and cause injury or death, especially around children.

Adjustments & Features

Doors and shelves can be adjusted for optimal function.

Door Alignment: Loosen hinge screws slightly to adjust door height/level; retighten.
Shelf Height: Move shelf pins to different pre-drilled holes to change shelf positions.
Soft-Close Hinges: Hinges include dampening for quiet closing; no adjustment needed.
Reversible Doors: Doors can be mounted to open from left or right by repositioning hinges.

Note: Do not force adjustments; refer to hinge manual for detailed alignment.

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners.

Use mild soap solution for stains; wipe dry immediately.
Dust regularly with soft, dry cloth.
Do not place near heat sources or in direct sunlight to prevent warping.
Tighten screws and hinges periodically to maintain stability.

CAUTION! Do not use wax, polish, or silicone-based products as they may damage finish.

Specifications

Model: HEMNES 293.884.25 High Cabinet
Dimensions: Height: 79.5" (202 cm), Width: 31.5" (80 cm), Depth: 15.75" (40 cm)
Material: Solid wood, particleboard, fiberboard
Finish: White stain, antique effect
Weight: 88 lbs (40 kg) approx.
Shelf Load Capacity: Max 22 lbs (10 kg) per shelf
Door Swing: 90 degrees
Required Tools: Allen key (included), screwdriver, hammer, stud finder

Warranty Information

IKEA limited warranty applies. See IKEA warranty terms for details.

Warranty Period: 10 years from date of purchase for structural defects.
Coverage: Manufacturing defects in materials and workmanship.
Exclusions: Damage from improper assembly, accidents, misuse, or normal wear.
Proof of Purchase: Keep receipt for warranty claims.

For warranty service, contact IKEA customer service with product name and receipt.

Troubleshooting

Issue	Possible Cause	Solution
Doors not closing properly	Misaligned hinges	Adjust hinge screws; ensure doors are level.
Cabinet wobbles	Uneven floor or loose screws	Check all cam locks and screws are tight; use shims under cabinet if floor uneven.
Shelves sagging	Overloaded	Reduce weight on shelves to under 22 lbs each.
Difficulty assembling parts	Wrong alignment or missing dowels	Verify dowels are inserted fully; follow step numbers exactly.
Scratches on surface	Assembly on hard surface	Assemble on carpet or cardboard; use touch-up paint for minor scratches.

Missing Parts? Contact IKEA customer service with product number for replacement parts.

Support: Visit www.ikea.com or call 1-888-888-4532 for assistance.