IKEA HEMNES 203.966.46 Cabinet instructions manual

The IKEA HEMNES 203.966.46 Cabinet is a versatile storage solution designed for assembly, featuring a classic design, solid wood construction, adjustable shelves, and glass doors. It requires customer assembly and includes all necessary hardware and tools. Below are key sections for safety, parts identification, assembly instructions, installation, care, and troubleshooting.

Parts & Hardware

Key components: Cabinet frame panels, glass doors, adjustable shelves, back panel, hinges, handles, screws, dowels, cam locks, and assembly tool.

Safety Information

Read all instructions before assembly. Ensure safe handling and proper installation.

1. Assembly requires two people due to size and weight.
2. Assemble on a soft, clean surface to avoid scratches.
3. Keep small parts away from children to prevent choking.
4. Use only provided IKEA hardware; do not substitute.
5. Ensure cabinet is securely anchored to wall to prevent tipping.

WARNING! Furniture tip-over can cause serious injury or death. Always secure this cabinet to the wall using the provided wall attachment device.

Assembly Instructions

Follow step-by-step assembly guide. Estimated assembly time: 60-90 minutes.

1. Lay all parts on a clean, flat surface. Identify parts using included guide.
2. Connect side panels to bottom panel using dowels and cam locks.
3. Attach top panel to side panels using same method.
4. Insert back panel into grooves and secure with provided screws.
5. Attach hinges to cabinet frame at marked positions.
6. Mount glass doors to hinges and adjust for proper alignment.
7. Attach handles to doors using screws from inside.
8. Insert adjustable shelves onto shelf pins at desired height.

CAUTION! Do not overtighten screws; this may strip the wood. Hand-tighten only.

Installation & Leveling

• Location: Place on even, stable floor away from direct sunlight and heat sources.
• Wall Attachment: Use included wall bracket and screws to secure top rear of cabinet to wall studs.
• Leveling: Adjust cabinet feet (if applicable) or use shims under base to ensure cabinet is level.
• Clearance: Allow minimum 2-inch clearance from walls for door opening and ventilation.

Tip: Use a level during installation to ensure proper alignment.

Specifications

• Dimensions (W x H x D): 31.5" x 74.75" x 15.75" (80 x 190 x 40 cm).
• Material: Solid wood (frame), tempered glass (doors), fiberboard (back panel).
• Weight: 88 lbs (40 kg) assembled.
• Color/Finish: Black-brown stain.
• Shelf Capacity: Max 33 lbs (15 kg) per shelf evenly distributed.
• Door Swing: 90-degree opening.
• Hardware: Included Allen key, screws, dowels, cam locks, wall attachment device.
• Warranty: Limited 10-year warranty. See warranty card for details.

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners.

1. Wood surfaces: Wipe with soft, damp cloth. Dry immediately. Use mild soap if needed.
2. Glass doors: Clean with glass cleaner and soft cloth. Avoid spraying directly on edges.
3. Hardware: Tighten screws and hinges periodically to maintain stability.
4. Avoid placing hot or wet items directly on surfaces; use coasters and mats.

CAUTION! Do not use harsh chemicals, ammonia-based cleaners, or abrasive pads on wood or glass.

Adjusting Shelves

Shelves are adjustable via shelf pins.

1. Empty shelf before adjusting.
2. Lift shelf slightly and pull forward to remove from pins.
3. Reposition shelf pins to desired height (pre-drilled holes at 1.5" intervals).
4. Place shelf on pins and push back until secure.
5. Ensure shelf is level and sits evenly on all four pins.

Note: Do not exceed maximum weight capacity per shelf.

Door Adjustment

Doors can be adjusted for alignment and closing tension.

1. Vertical adjustment: Loosen hinge screws on cabinet frame, move door up/down, retighten.
2. Horizontal adjustment: Use adjustment screw on hinge to move door in/out.
3. Depth adjustment: Turn screw on hinge to change door closing tension.
4. Check alignment: Doors should close evenly with consistent gap (approx. 1/8").

Tip: Make small adjustments and test frequently.

Regulatory Information

This product meets applicable safety standards. Furniture tip-over restraints included. For EU market: CE marked. Materials comply with REACH and other relevant regulations. Copyright © IKEA of Sweden AB. IKEA and HEMNES are trademarks of Inter IKEA Systems B.V. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Replacement Parts: Visit IKEA website or store with product number (203.966.46).

Customer Service: 1-888-888-4532 (IKEA US); www.ikea.com