IKEA HEMNES 203.966.46 Cabinet instructions manual

The IKEA HEMNES 203.966.46 Cabinet is a versatile storage solution featuring a classic design with a white finish, adjustable shelves, and a glass door. It requires assembly and includes all necessary hardware. Below are key sections for safety, parts list, assembly steps, installation, care, and troubleshooting.

1. Parts and Hardware 2. Safety Information 3. Assembly Instructions 4. Installation Guide 5. Specifications 6. Adjustments and Features 7. Care & Maintenance 8. Warranty Information 9. Troubleshooting

Parts and Hardware

Key components: Cabinet frame, glass door, adjustable shelves, back panel, hinges, screws, cam locks, dowels, and wall attachment device.

Part NumberDescriptionQuantity
100001Cabinet side panel2
100002Cabinet top panel1
100003Cabinet bottom panel1
100004Adjustable shelf2
100005Back panel1
100006Glass door with frame1
200001Hinge4
300001Screw (4x30mm)20
300002Cam lock8
300003Dowel (8x40mm)12
400001Wall attachment device1 set

Safety Information

Read all instructions before assembly. Ensure a clean, flat workspace.

  1. Use proper tools: Phillips screwdriver, hammer, and level recommended.
  2. Check all parts: Verify all components are present and undamaged.
  3. Assembly: Requires two people for safe handling of large panels.
  4. Secure to wall: To prevent tipping, always attach cabinet to wall using provided device.

WARNING! Cabinet is heavy; lift with care to avoid injury. Keep small parts away from children.

Assembly Instructions

Follow steps in order; do not overtighten screws.

  1. Attach side panels to bottom panel: Insert dowels, align, and secure with cam locks.
  2. Install top panel: Connect to side panels using dowels and cam locks.
  3. Attach back panel: Place into grooves and secure with provided screws.
  4. Install shelves: Insert shelf supports at desired heights; place shelves on supports.
  5. Mount hinges: Attach hinges to side panel and door using screws.
  6. Hang door: Align hinges and secure; adjust door alignment if needed.

CAUTION! Ensure all connections are tight and panels are square before proceeding.

Installation Guide

Tip: Mark wall stud locations before drilling for wall attachment.

Specifications

Adjustments and Features

Door Adjustment: Loosen hinge screws to align door vertically/horizontally. Shelf Height: Move shelf supports to desired holes. Soft-Close: Hinges include soft-close mechanism; ensure proper installation.

Care & Maintenance

Clean with damp cloth; dry immediately. Do not use abrasive cleaners.

CAUTION! Avoid direct sunlight and high humidity to prevent damage.

Warranty Information

Limited 10-year warranty against manufacturing defects. Contact IKEA for warranty claims. For support, visit www.ikea.com or contact 1-888-888-4532.

Troubleshooting

SymptomPossible CauseCorrective Action
Door not closing properlyHinge misalignmentLoosen hinge screws, adjust door, retighten.
Shelf not levelSupports not at same heightEnsure shelf supports are in matching holes on both sides.
Cabinet wobblesFloor uneven or not attached to wallLevel with shims; secure to wall with attachment device.
Cam lock not tighteningDowel not fully insertedCheck dowel alignment; ensure it is fully seated in hole.
Glass door squeaksHinges need lubricationApply silicone-based lubricant to hinge pins.

Note: If parts are missing or damaged, contact IKEA for replacements.

Service: 1-888-888-4532; www.ikea.com

IKEA HEMNES 203.966.46 Cabinet instructions manual © - All Rights Reserved 2025