IKEA HEMNES 203.490.04 Shelf instructions manual

The IKEA HEMNES 203.490.04 is a freestanding wooden shelf unit designed for home storage and display. It features a classic design with a white finish, adjustable shelves, and a sturdy construction. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Adjusting Shelves 5. Weight Limits & Placement 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Parts & Hardware

Before assembly, verify all parts are present. Check packaging materials thoroughly.

Part DescriptionQuantityImage Ref.
Side Panel (Left)1A
Side Panel (Right)1B
Top Panel1C
Bottom Panel1D
Adjustable Shelf3E
Back Panel1F
Cam Lock Nut81
Screw202
Wooden Dowel103
Wall Attachment Device1 set4

Safety Information

Read all instructions before assembly. Keep children and pets away during assembly.

  1. Assemble on a soft, clean surface to avoid scratches.
  2. Use only included IKEA tools and hardware.
  3. Ensure all connections are tight and secure before use.
  4. To prevent tipping, always secure the unit to the wall using the provided wall attachment device.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall using the provided restraints.

Assembly Instructions

Follow steps in numerical order. Do not fully tighten screws until the structure is square.

  1. Prepare Parts: Lay out all panels with the finished side facing down on a protected surface.
  2. Connect Side & Bottom: Insert wooden dowels (3) into pre-drilled holes in the bottom panel (D). Align with side panel (A) and tap gently to connect. Secure with cam lock nuts (1).
  3. Attach Second Side: Repeat step 2 to attach the other side panel (B).
  4. Install Back Panel: Place the back panel (F) into the groove on the rear of the assembled frame. Secure with provided screws (2).
  5. Attach Top Panel: Place the top panel (C) onto the assembly. Secure from the inside using cam lock nuts and screws.
  6. Final Tightening: Check that the unit is square. Tighten all cam lock nuts and screws firmly.

CAUTION! Two people are recommended for assembly, especially when attaching the top panel.

Adjusting Shelves

The shelves are adjustable to accommodate items of different heights.

  1. Empty the shelf before adjusting.
  2. Lift the front of the shelf slightly, then pull it forward to disengage the rear pins.
  3. Align the shelf pins with the desired set of holes on the side panels.
  4. Insert the rear pins first, then lower the front into place.
  5. Ensure the shelf is level and securely seated on all four pins.

Weight Limits & Placement

Care & Maintenance

Clean with a damp cloth wrung out in a mild soap solution. Wipe dry immediately.

DO NOT use abrasive cleaners, scouring pads, or solvents, as they may damage the finish.

To maintain stability, periodically check and retighten screws and wall attachments.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit wobblesFloor uneven / screws loosePlace on level surface; check and tighten all screws and cam locks.
Shelf will not sit levelPins not fully engagedRemove shelf and re-insert, ensuring all four pins click into the holes.
Cam lock won't tightenCross-threaded or misalignedLoosen completely, realign the screw, and tighten again.
Gaps between panelsAssembly steps out of orderLoosen connections, square the frame, and retighten in correct sequence.
Missing partPackaging errorContact IKEA customer support with article number (203.490.04).

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty brochure included in the package or available at IKEA stores for full terms.

For Assembly Help, Missing Parts, or Returns:
Visit: www.ikea.com
Call (US): 1-888-888-4532
Have your article number (203.490.04) and receipt ready.

IKEA HEMNES 203.490.04 Shelf instructions manual © - All Rights Reserved 2025