IKEA HEMNES 193.884.21 Sink Cabinet instructions manual

The IKEA HEMNES 193.884.21 is a sink cabinet designed for bathroom use, featuring a classic design with a white finish, integrated sink basin, storage space, and water-resistant construction. It requires assembly and includes components for mounting to the wall, connecting plumbing, and installing doors/drawers. Below are key sections for safety, parts list, assembly, installation, care, and troubleshooting.

Parts & Hardware Included

Verify all parts before starting assembly. Key components: Cabinet frame, sink basin, doors, drawers, hinges, screws, mounting brackets, plumbing template.

Tools Required

Gather these tools before assembly.

• Phillips screwdriver
• Adjustable wrench
• Level
• Pencil
• Tape measure
• Drill (optional, for wall mounting)
• Plumber's putty (not included)
• Silicone sealant (not included)

Safety Instructions

WARNING! Read all instructions before assembly. Use proper lifting techniques; cabinet is heavy.

1. Assemble on a soft, clean surface to avoid scratches.
2. Ensure wall is sturdy enough to support cabinet weight when mounted.
3. Turn off water supply before connecting plumbing.
4. Keep small parts away from children to prevent choking hazard.
5. Wear safety glasses when drilling.

CAUTION! Do not stand on or place excessive weight on sink basin.

Assembly Steps

Follow steps in order. Allow 1-2 hours for assembly.

1. Attach base frame: Connect base frame to side panels using screws S001.
2. Install back panel: Secure back panel to side panels and base.
3. Mount sink basin: Place basin into top cutout; secure from underneath with provided clips.
4. Install drawer runners: Attach runners to side panels using screws S002.
5. Assemble drawer: Attach drawer front to drawer box; insert into runners.

Tip: Do not fully tighten screws until all parts are aligned.

Installation & Mounting

Cabinet must be securely mounted to wall studs.

1. Position cabinet against wall; use level to ensure it is straight.
2. Mark drill points through mounting brackets onto wall.
3. Drill pilot holes into wall studs.
4. Secure cabinet with mounting screws S001 into studs.
5. Re-check level after tightening.

WARNING! Failure to mount securely can cause cabinet to fall, resulting in injury or damage.

Plumbing Connection

Connect sink drain and water supply lines.

1. Apply plumber's putty around drain flange; insert into sink drain hole.
2. Connect P-trap and drain pipe to cabinet outlet.
3. Connect hot and cold water supply lines to faucet valves.
4. Turn on water supply; check for leaks at all connections.
5. Apply silicone sealant around sink edge where it meets cabinet for water resistance.

CAUTION! Ensure all connections are tight to prevent water damage.

Door & Drawer Installation

Attach doors and adjust hinges for proper alignment.

1. Attach hinges H001 to door panels.
2. Mount doors to cabinet side panels.
3. Adjust hinge screws to align doors evenly.
4. Install drawer front onto drawer box; adjust for level appearance.
5. Test door/drawer operation; ensure smooth opening/closing.

Care & Maintenance

Clean with mild soap and water; avoid abrasive cleaners.

• Wipe spills immediately to prevent water damage.
• Periodically check mounting screws and tighten if loose.
• Reapply silicone sealant if it cracks or peels.
• Do not use bleach or ammonia-based products on finish.

CAUTION! Do not place hot objects directly on sink surface.

Specifications

• Model: HEMNES 193.884.21
• Color: White
• Material: Particleboard, foil, acrylic paint
• Sink Material: Ceramic
• Dimensions (W x D x H): 31.5" x 21.25" x 34.25" (80 x 54 x 87 cm)
• Weight: 55 lbs (25 kg) unassembled
• Max Load: 110 lbs (50 kg) distributed evenly
• Warranty: 10-year limited warranty

Troubleshooting

Support: For missing parts or assembly help, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com.