IKEA HEMNES 003.604.17 6 Drawer Chest instructions manual

The IKEA HEMNES 003.604.17 is a 6-drawer chest constructed from solid wood and wood-based materials, featuring a classic Scandinavian design with a white stain finish. It requires assembly and includes all necessary hardware (screws, dowels, cam locks), a drawer stop mechanism to prevent tipping, and adjustable feet for stability on uneven floors. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Drawer Installation 5. Adjusting & Leveling 6. Care & Maintenance 7. Safety Features 8. Specifications 9. Troubleshooting 10. Warranty & Support

Parts & Hardware

All components included in the package. Check against this list before starting assembly.

Part Name	Quantity	Image Code
Side Panel (Left & Right)	2	A1, A2
Back Panel	1	B
Top Panel	1	C
Bottom Panel	1	D
Drawer Fronts (6 pieces)	6	E1-E6
Drawer Sides & Backs	Set	F
Drawer Bottoms	6	G
Drawer Glides/Runners	12 pairs	H
Cam Locks with Screws	10	I
Wooden Dowels	20	J
Adjustable Feet	4	K
Drawer Stop Device	1	L
Assembly Tool (Hex Key)	1	M

Safety Information

Read all instructions before assembly. Ensure a safe environment.

Tip-Over Prevention: Always secure the chest to the wall using the included anti-tip device and hardware (not always included, check package).
Assembly Surface: Use a soft, clean surface to avoid scratching parts.
Tool Safety: Use provided tools carefully; keep away from children.
Weight Capacity: Do not exceed drawer weight limits; distribute weight evenly.
Children: Do not allow children to climb or play on the chest.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this chest to the wall.

Assembly Instructions

Follow steps in order. Do not fully tighten screws until structure is square.

Prepare: Unpack all parts in the room where chest will be used. Check for damage.
Frame Construction:
- Attach side panels (A1, A2) to bottom panel (D) using dowels (J) and cam locks (I).
- Insert back panel (B) into grooves on side and bottom panels.
- Attach top panel (C) to side panels using dowels and cam locks.
Secure Frame: Ensure all cam locks are turned to locked position (usually a 90° turn). Tighten any screws.
Install Drawer Glides: Attach glide rails (H) to the inside of the cabinet sides according to markings. Ensure they are level and aligned.

Tip: Assemble with a partner for easier handling of large panels.

Drawer Installation

Assemble drawers before inserting into chest.

Drawer Box: Connect drawer sides and back (F) using dowels and cam locks. Insert drawer bottom (G) into grooves.
Drawer Front: Attach drawer front (E) to the drawer box using screws from inside the box. Ensure it is centered and aligned before tightening.
Install Glides: Attach the mating glide pieces to the outer sides of each drawer box.
Insert Drawers: Slide each drawer into its corresponding slot in the chest. The drawer should glide smoothly. Adjust if necessary.

Note: Drawers are often numbered (E1-E6) corresponding to positions from top to bottom.

Adjusting & Leveling

Ensure chest is stable and does not rock.

Position Chest: Move chest to its final location.
Adjust Feet: Turn the adjustable feet (K) at the bottom of each leg to compensate for uneven floors. Use a level.
Check Drawers: All drawers should open and close smoothly. If a drawer sticks, check glide alignment and level of the chest.
Wall Attachment: CRITICAL STEP. Attach the included drawer stop device (L) or wall strap to the back of the chest and securely into a wall stud.

Care & Maintenance

Proper care will maintain appearance and function.

Cleaning: Wipe with a damp cloth. Dry immediately. Use mild soap if needed.
Stain Removal: For white stain finish, use a non-abrasive cleaner. Test in an inconspicuous area first.
Drawer Glides: Clean glides with a dry cloth. Do not oil or lubricate.
Avoid: Direct sunlight, heat sources, and excessive moisture.

CAUTION! Do not use abrasive cleaners, scouring pads, or harsh chemicals.

Safety Features

This product includes safety mechanisms.

Feature	Purpose	Use
Drawer Stop	Prevents all drawers from being opened simultaneously, reducing tip-over risk.	Automatically engages when multiple drawers are open.
Wall Attachment Device	Secures furniture to wall.	Must be installed into a solid wall stud using appropriate screws (may not be included).
Adjustable Feet	Provides stability on uneven floors.	Turn to extend or retract until chest is stable.

Specifications

Article Number: 003.604.17
Series: HEMNES
Color: White stain
Material: Solid wood, Particleboard, Fiberboard, Plastic
Dimensions (assembled): Height: 38 ½" (98 cm), Width: 35 ¾" (91 cm), Depth: 18 ½" (47 cm)
Drawer Dimensions (internal, approx.): Varies by drawer position.
Max Load per Drawer: See drawer bottom label (typically 20-30 lbs / 9-14 kg).
Weight (net): Approx. 85 lbs (38.5 kg)
Required Tools for Assembly: Hex key (included), Phillips screwdriver (not included), hammer (for dowels).

Troubleshooting

Problem	Possible Cause	Solution
Drawer sticks or is difficult to open	Misaligned glides; chest not level; overloaded.	Check glide alignment; level the chest; reduce weight in drawer.
Chest wobbles	Uneven floor; feet not adjusted.	Adjust the four feet until stable.
Gap between drawer front and chest	Drawer front not properly aligned during assembly.	Loosen screws inside drawer box, reposition front, retighten.
Cam lock does not tighten	Dowel not fully inserted; cam lock stripped.	Ensure dowel is pressed all the way in. If cam is stripped, contact IKEA for replacement part.
Missing part or hardware	Packaging error.	Contact IKEA customer service with article number (003.604.17) for missing parts.

Warranty & Support

IKEA limited warranty. See IKEA terms and conditions for details.

Warranty: IKEA products come with a commercial warranty. The length varies by country. Refer to the IKEA store or website.
Spare Parts: Many parts are available for purchase separately. Visit the IKEA Spare Parts website or in-store customer service.
Assembly Help: Assembly service may be available for a fee. Check with your local IKEA store.
Support: For questions or missing parts:
- Visit: www.ikea.com
- Contact your local IKEA store.
- Have the article number (003.604.17) ready.

Recall & Safety Notices: Register your product at IKEA website to receive safety updates.