IKEA HEMMA 095.309.72 Cord instructions manual

The IKEA HEMMA 095.309.72 is a power cord designed for use with compatible IKEA lighting products. This cord features a standard plug, in-line switch for easy on/off control, and is intended for indoor use with low-voltage lighting systems. Below are key sections for safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Connecting to Lighting 7. Safety Features 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Power cord with plug, in-line switch, connector for compatible IKEA lighting fixtures.

Feature	Description
Standard plug	For connection to wall outlet (compatible with regional standards)
In-line switch	Convenient on/off control along the cord length
Connector end	Designed to connect securely to compatible IKEA lighting fixtures
Cord length	Standard length for flexible placement
Indoor use only	Designed for dry indoor environments
Low-voltage compatibility	For use with appropriate low-voltage lighting systems

Installation

Unpack and inspect contents. Ensure all components are present and undamaged.

Verify compatibility: Ensure cord is compatible with your IKEA lighting fixture.
Connect to fixture: Attach connector end securely to lighting fixture according to fixture instructions.
Route cord safely: Position cord to avoid tripping hazards, sharp edges, or heat sources.
Plug into outlet: Insert plug into appropriate wall outlet.

WARNING! Ensure power is off during installation. Do not force connections. Keep cord away from water and heat sources.

First-Time Setup

After installation, test operation.

Check connections: Ensure all connections are secure.
Power on: Use in-line switch to turn on power.
Test fixture: Verify lighting fixture operates correctly.
Adjust placement: Position cord and switch for convenient access.

CAUTION! Do not overload outlet. Use only with compatible low-voltage lighting systems.

Specifications

Product Code: HEMMA 095.309.72
Type: Power cord with in-line switch
Cord Length: Standard length (refer to packaging for exact measurement)
Voltage: For low-voltage lighting systems (check fixture requirements)
Plug Type: Standard regional plug
Switch Type: In-line rocker or toggle switch
Compatibility: Designed for specific IKEA lighting fixtures
Environment: Indoor use only, dry locations

Controls and Operation

Operation is simple with the in-line switch.

Switch Operation: Flip or press switch to turn power on/off to connected fixture.

Indicator: Some switches may include a small indicator light when powered (if applicable).

Positioning: Place switch in accessible location along cord route for easy operation.

Connecting to Lighting

Ensure proper connection to compatible IKEA lighting fixture.

Turn off power at outlet before connecting.
Align connector with fixture port; connect securely until it clicks or locks.
Do not modify connector or force connection.
After connection, secure cord along desired path using appropriate fasteners (not included).

Tip: Route cord along walls or furniture edges using cord clips for neat appearance and safety.

Safety Features

Designed with safety in mind for indoor low-voltage use.

Polarized plug (if applicable) for proper grounding.
Strain relief at connector to prevent wire damage.
Insulated switch housing.
Compliance with regional electrical safety standards.

Important: Do not use with high-voltage appliances or outdoors. Do not submerge in water.

Care & Maintenance

Unplug from outlet before cleaning. Wipe cord with dry cloth only; do not use liquids or abrasive cleaners.

CAUTION! Do not pull cord to unplug; grasp plug directly. Inspect periodically for damage such as fraying or cracks.

Regulatory Information

Complies with applicable electrical safety standards for low-voltage cords. Copyright and trademarks owned by Inter IKEA Systems B.V. For support, visit www.ikea.com or contact your local IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	Power outlet issue, switch off, loose connection	Check outlet with another device; ensure switch is on; check connections at fixture and outlet.
Intermittent operation	Loose connection, damaged cord	Secure all connections; inspect cord for damage (do not use if damaged).
Switch feels loose or stuck	Mechanical defect	Discontinue use; contact IKEA for replacement.
Cord gets warm during use	Overload, incompatible fixture	Ensure fixture is compatible and within voltage/current limits; disconnect if overheating occurs.
No power at fixture	Faulty cord, blown fuse	Test with another compatible fixture (if safe); check home fuse/circuit breaker.

Replacement: If cord is damaged, discontinue use and replace with identical or approved IKEA cord.

Service: Contact IKEA customer service or visit www.ikea.com for assistance.