IKEA HEKTAR 502.165.40 Spotlight instructions manual

The IKEA HEKTAR 502.165.40 is a versatile spotlight designed for indoor use, featuring an adjustable head for directional lighting, a durable metal construction, and compatibility with standard E27 bulbs (max 60W). It is suitable for wall or ceiling mounting and includes all necessary hardware for installation. Below are key sections for safety, features, installation, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Adjustment 6. Connecting to Power 7. Bulb Replacement 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable spotlight head, Mounting bracket, Wall plate, Cable management, E27 bulb socket.

Feature	Description
Adjustable head	360-degree rotation and tilt for directional lighting
Mounting bracket	For secure wall or ceiling installation
Wall plate	Cover plate for a finished look
Cable management	Internal channel for neat wire routing
E27 socket	Standard bulb base, max 60W
Material	Durable metal construction with powder-coated finish
Color	Black (as per model 502.165.40)
Installation	Includes screws, wall plugs, and mounting hardware
Compatibility	For indoor use only
Design	Modern, minimalist design

Installation

Unpack and inspect all parts. Ensure you have the correct tools (screwdriver, drill, level).

Choose location: Select a sturdy wall or ceiling area near a power source.
Mark drill points: Use the mounting bracket as a template to mark holes.
Drill holes: Insert wall plugs if mounting into drywall or masonry.
Attach bracket: Secure the mounting bracket with provided screws.
Connect wires: Follow local electrical codes; connect live, neutral, and ground wires to terminal block.
Attach spotlight: Secure the spotlight head to the bracket and adjust position.
Install wall plate: Snap or screw the cover plate into place.

WARNING! Always turn off power at the circuit breaker before installation. If unsure, consult a qualified electrician.

First-Time Setup

After installation, restore power and test the spotlight.

Insert bulb: Use an E27 LED or incandescent bulb (max 60W). Do not exceed wattage.
Turn on power: Switch on at the circuit breaker and light switch.
Test operation: The bulb should illuminate. If not, check connections and bulb.
Adjust head: Rotate and tilt the spotlight to desired direction.

CAUTION! Do not touch bulb when hot. Allow to cool before adjustment.

Specifications

Model: HEKTAR 502.165.40
Type: Adjustable spotlight
Bulb Socket: E27
Max Wattage: 60W
Voltage: 120V AC, 60Hz (for North America)
Material: Metal with powder-coated finish
Color: Black
Dimensions: Approx. 8.5" length, 3" head diameter
Weight: 1.2 lbs (0.55 kg)
Mounting: Wall or ceiling
IP Rating: Not rated for damp/wet locations (indoor use only)

Controls and Adjustment

The spotlight is controlled by a standard wall switch. No remote or dimmer is included.

Manual Adjustment: Grip the spotlight head and adjust to desired angle. The joint holds position securely.

Note: The HEKTAR does not have built-in controls; lighting is managed via your home's switch.

Connecting to Power

Ensure proper electrical connection for safe operation.

Turn off power at the circuit breaker.
Connect wires: Match colors (black to live, white to neutral, green/bare to ground).
Secure connections: Use wire nuts or terminal block provided.
Insulate: Ensure no bare wire is exposed.
Restore power and test.

Tip: Use a voltage tester to confirm power is off before working on wires.

Bulb Replacement

Replace bulb when it burns out or for different lighting effect.

Turn off power and allow bulb to cool.
Gently unscrew old bulb counterclockwise.
Screw in new E27 bulb (max 60W) clockwise until snug.
Restore power and test.

WARNING! Do not exceed 60W to prevent overheating and damage.

Safety Features

Overheat protection: Ensure adequate ventilation and correct wattage. Grounding: Proper ground connection is essential for safety.

Care & Cleaning

Turn off power and allow to cool before cleaning. Use a soft, dry cloth to wipe exterior. For stubborn dirt, use a damp cloth with mild soap, then dry immediately.

CAUTION! Do not use abrasive cleaners, solvents, or spray directly onto the fixture.

Regulatory Information

Complies with relevant electrical safety standards for North America. This product is intended for indoor residential use only. For support, visit www.ikea.com or contact IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	Power/bulb	Check circuit breaker and switch; replace bulb; ensure connections are secure.
Flickering light	Loose bulb/connection	Tighten bulb; check wire connections.
Overheating	Exceeded wattage	Use bulb with 60W or less; ensure proper ventilation.
Head won't stay in position	Loose joint	Tighten adjustment joint if possible; avoid excessive force.
Buzzing sound	Bulb type/transformer	Try a different bulb (LED recommended); check for compatible dimmer if used.

Note: This fixture has no user-serviceable parts inside. Do not attempt to disassemble.

Service: Contact IKEA customer service for replacement parts or further assistance.