IKEA HEKTAR 403.234.37 Work Lamp instructions manual

The IKEA HEKTAR 403.234.37 is an adjustable work lamp designed for focused task lighting. It features a flexible gooseneck arm, a sturdy clamp base for secure attachment to desks or shelves, an energy-efficient LED light source, and a simple on/off switch. The lamp provides directed, glare-free illumination ideal for reading, crafting, or detailed work. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. Installation & Mounting 4. Specifications 5. Controls and Operation 6. Positioning & Adjustment 7. Replacing the Light Source 8. Safety Information 9. Care & Cleaning 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Adjustable gooseneck arm, Clamp base with protective pads, Integrated LED light module, On/Off switch, Power cord with plug.

Feature	Description
Gooseneck Arm	Flexible arm for precise positioning of the light head
Clamp Base	Secure attachment to surfaces up to 55mm thick
LED Light Source	Integrated, energy-efficient LED module
On/Off Switch	Simple rocker switch on the power cord
Protective Pads	Prevent damage to the mounting surface
Power Cord	Standard power cord with plug (length: 1.8m)

Assembly Instructions

Unpack all parts and check contents. Assembly requires no tools.

Attach the gooseneck arm: Screw the threaded end of the arm into the socket on the clamp base. Hand-tighten firmly.
Attach the lamp head: Screw the lamp head onto the top of the gooseneck arm. Hand-tighten.
Attach the protective pads: Peel off the backing and apply the felt pads to the inside jaws of the clamp.
Route the power cord: Ensure the cord runs freely from the base without sharp bends or pinches.

WARNING! Do not overtighten connections. Ensure all parts are secure before proceeding to installation.

Installation & Mounting

Choose a stable, suitable surface for mounting.

Select location: Choose a desk edge, shelf, or worktable with a thickness not exceeding 55mm.
Open the clamp: Turn the clamp screw counter-clockwise to open the jaws wide enough for the surface.
Position the lamp: Place the clamp over the edge of the surface, ensuring the protective pads are in contact.
Tighten the clamp: Turn the clamp screw clockwise until the lamp is held firmly in place. Do not overtighten.
Plug in: Connect the power cord to a standard 120V AC outlet.

CAUTION! Ensure the surface can support the lamp's weight. Do not mount on unstable or fragile surfaces.

Specifications

Model: HEKTAR 403.234.37
Light Source: Integrated LED module (non-replaceable under normal use)
Power Consumption: 4.5W
Luminous Flux: 300 lumens
Color Temperature: 2700K (Warm White)
Arm Length: Adjustable gooseneck, approx. 40cm extended
Clamp Capacity: Fits surfaces up to 55mm thick
Power Supply: 120V AC, 60Hz
Cord Length: 1.8 meters
Materials: Steel, ABS plastic

Controls and Operation

Operation is simple via the integrated switch.

On/Off Switch: Located on the power cord. Press one side to turn the lamp ON, the other side to turn it OFF.

Positioning: Gently bend the gooseneck arm to direct the light where needed. The lamp head can also be tilted slightly at its joint.

Note: This lamp does not have a dimmer function.

Positioning & Adjustment

For optimal task lighting and to avoid glare.

Position the lamp so the light shines onto your work surface, not into your eyes.
Bend the gooseneck smoothly and gradually. Avoid sharp, repetitive bending at the same spot.
Ensure the lamp is stable and the clamp remains tight after adjustment.

Tip: Position the lamp on the side opposite your writing hand to minimize shadows.

Replacing the Light Source

The LED module is integrated and designed to last the lifetime of the product under normal use. It is not user-replaceable. If the light fails, the entire lamp unit should be replaced.

WARNING! Do not attempt to disassemble the lamp head. There are no user-serviceable parts inside. Risk of electric shock.

Safety Information

Read all instructions before use.

This lamp is for indoor use only.
Do not use in damp or wet locations (e.g., bathroom).
Ensure the power cord does not become pinched or damaged.
Do not look directly into the LED light source.
Unplug the lamp before cleaning or when not in use for extended periods.
This product is not a toy. Keep away from children.
Do not cover the lamp or place objects on it during operation.

Care & Cleaning

Unplug the lamp from the outlet before cleaning.

Use a soft, dry cloth to wipe the exterior surfaces (arm, base, lamp head).
For stubborn marks, dampen the cloth slightly with water. Do not use solvents or abrasive cleaners.
Ensure the lamp is completely dry before plugging it back in.

CAUTION! Never immerse the lamp, cord, or plug in water or other liquids.

Warranty & Support

Refer to the IKEA warranty terms provided with your purchase or available at IKEA stores and www.IKEA.com. This lamp is covered by IKEA's limited warranty. For product support, assembly questions, or spare parts, please contact your local IKEA store or visit the IKEA website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Loose connection	Check if the outlet is working. Ensure the plug is fully inserted. Check the on/off switch position.
Lamp is unstable	Clamp not tight enough / Surface too thick	Tighten the clamp screw. Ensure surface thickness is ≤55mm. Reposition on a sturdier part of the surface.
Gooseneck will not hold position	Arm over-extended / Worn	Do not bend the arm to its extreme limits. If it becomes permanently loose, the lamp may need replacement.
Light flickers	Loose connection / Faulty LED module	Check plug and cord connections. If problem persists, the product may be defective.
Lamp gets warm	Normal operation	The base and arm may become warm during prolonged use. This is normal. Ensure vents are not blocked.

Disposal: Dispose of this product in accordance with local electronic waste (e-waste) regulations. Do not dispose of with household waste.

Support: IKEA Customer Support: 1-800-434-4532 (US) or www.IKEA-usa.com