IKEA HEKTAR 402.974.95 Ceiling Lights instructions manual

The IKEA HEKTAR 402.974.95 is a modern ceiling light fixture designed for general room illumination. It features a durable metal construction, an E27 bulb socket (max 13W LED or equivalent), a white finish, and a straightforward installation system suitable for standard ceiling mounting. Below are key sections for safety, features, installation, setup, operation, and maintenance.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Specifications 5. Installation Instructions 6. Mounting & Wiring 7. Bulb Installation 8. Operation & Use 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Metal shade, mounting bracket, wire connectors, screws, and installation guide.

Feature	Description
Design	Modern, round ceiling light with white finish
Bulb Socket	1 x E27 (Edison screw)
Max Wattage	13W LED or equivalent energy-saving bulb
Material	Metal shade, plastic diffuser (if included)
Mounting	Ceiling plate with screw holes for secure attachment
Dimensions	Diameter: Approx. 30 cm, Height: Approx. 15 cm
Intended Use	Indoor residential ceiling lighting
Included	Mounting hardware, wire connectors, instruction manual

Safety Information

Read all instructions before installation and use.

Ensure power is switched OFF at the circuit breaker before installation.
Installation should be performed by a qualified electrician if you are unsure.
Use only recommended bulb type and wattage to prevent overheating.
Keep away from flammable materials and do not cover the light fixture.
Do not use in bathrooms or other high-moisture areas unless rated for such use.

WARNING! Risk of electric shock. Disconnect power before installation or maintenance. Do not exceed maximum wattage.

Package Contents

Unpack and verify all parts are included.

Ceiling Light Shade: 1 piece
Mounting Bracket: 1 piece
Screws & Anchors: As needed for your ceiling type
Wire Connectors: 2 pieces
Instruction Manual: This document

Note: Bulb not included. Contact retailer if any parts are missing.

Specifications

Product Name: HEKTAR
Article Number: 402.974.95
Color: White
Material: Metal, Plastic
Bulb Base: E27
Max Power: 13W LED or equivalent (e.g., 60W incandescent replacement)
Voltage: 120V AC, 60Hz (for North America)
IP Rating: IP20 (Not suitable for wet locations)
Weight: Approx. 1.2 kg

Installation Instructions

Follow these steps for safe and correct installation.

Turn Off Power: Switch off electricity at the main fuse box/circuit breaker.
Remove Old Fixture: If replacing, carefully disconnect and remove old light.
Prepare Mounting Bracket: Attach the provided bracket to the ceiling electrical box using screws (ensure it is secure).
Connect Wires: Match wire colors: Black/Red (live) to black, White (neutral) to white, Green/Yellow (ground) to green or grounding screw.
Secure Wires: Use wire connectors and tuck wires neatly into the ceiling box.
Attach Light Fixture: Align fixture with bracket and secure with provided screws.
Install Bulb: Screw in an E27 bulb (max 13W LED).
Restore Power & Test: Turn power back on and test the light switch.

CAUTION! Ensure all connections are tight and insulated. Do not pinch wires.

Mounting & Wiring

Detailed wiring and mounting guidance.

Identify ceiling electrical box and ensure it can support the fixture's weight.
Use appropriate anchors for your ceiling type (drywall, concrete, etc.).
Connect wires: Fixture black wire to supply black (hot), fixture white wire to supply white (neutral), ground wire to grounding point.
Secure all connections with wire nuts and wrap with electrical tape if desired.

Tip: Have a helper hold the fixture during wiring to avoid strain.

Bulb Installation

Supports E27 base bulbs (LED recommended).

Ensure light switch is OFF and fixture is cool.
Insert bulb into socket and turn clockwise until snug.
Do not overtighten.
Recommended: Use a 13W LED bulb for optimal energy efficiency and light output.

WARNING! Do not use bulbs exceeding 13W LED equivalent to prevent overheating and damage.

Operation & Use

Operate via standard wall switch.

Turn on/off using connected wall switch.
For dimming, use only with compatible LED dimmer switches and dimmable LED bulbs.
Allow fixture to cool before changing bulbs or cleaning.

Note: This fixture is not designed for use with ceiling fans or in vibrating environments.

Care & Cleaning

Turn off power and let fixture cool before cleaning.

Use a dry, soft cloth to dust the exterior.
For stubborn dirt, use a slightly damp cloth with mild soap, then dry immediately.
Do not use abrasive cleaners, solvents, or sprays.
Do not immerse any part of the fixture in water.

CAUTION! Never clean while the light is on or hot. Moisture can cause electrical hazards.

Regulatory Information

This product complies with applicable electrical safety standards. CE marked for European market, UL listed or equivalent for North America. Dispose of packaging and product according to local regulations. For more information, contact IKEA customer service or visit www.ikea.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	Power off / Bulb faulty	Check circuit breaker; ensure switch is on; replace bulb.
Flickering light	Loose connection / Incompatible bulb	Turn off power and check wire connections; use recommended bulb type.
Fixture is hot	Bulb wattage too high	Replace with bulb of correct max wattage (13W LED).
Humming sound (with dimmer)	Non-dimmable bulb / Incompatible dimmer	Use dimmable LED bulb and compatible LED dimmer switch.
Fixture loose	Mounting screws not tight	Turn off power and securely tighten mounting screws.

Service: For product issues, contact IKEA customer support or return to store with proof of purchase.