The IKEA HEKTAR 202.961.09 is a ceiling/wall lamp with a metal shade, designed for indoor use. It features an E27 bulb socket (max 60W), a pull cord for on/off control, and a fixed mounting bracket. The lamp is designed for easy installation and provides directed light suitable for various room settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Metal shade, E27 bulb socket, Mounting bracket, Pull cord switch, Power cable with plug.
| Feature | Description |
|---|---|
| Metal shade | Directs light downward; provides a focused light beam |
| E27 bulb socket | Standard screw-type socket for bulbs up to 60W |
| Mounting bracket | For secure ceiling or wall mounting |
| Pull cord switch | Manual on/off control via hanging cord |
| Power cable with plug | For connection to standard wall outlet |
| Installation hardware | Screws and wall plugs included for mounting |
| Material | Steel shade, plastic socket holder |
| Color | Black finish (as per model) |
| Intended use | Indoor residential use only |
| Light direction | Fixed downward direction |
Unpack and inspect contents. Ensure you have a stable mounting surface.
WARNING! Ensure the power is turned off at the circuit breaker before installation to avoid electric shock. The lamp is heavy; use appropriate tools and secure mounting.
After installation, perform initial setup.
CAUTION! Do not exceed the maximum wattage (60W) to prevent overheating and damage.
The lamp has a simple pull cord switch for on/off control. There are no adjustable settings for brightness or color temperature.
Operation: Pull the cord once to turn the lamp on. Pull again to turn it off. Ensure the cord hangs freely and is not tangled.
Note: The lamp does not have a dimmer function. Using a dimmable bulb with an external dimmer switch may be possible but is not supported or recommended by IKEA.
The lamp is designed for plug-in operation.
Tip: For wall mounting, plan the cable route to avoid tripping hazards and use cable clips if needed.
Supports E27 screw-type bulbs (incandescent, LED, CFL up to 60W).
WARNING! Always match or stay below the maximum wattage (60W). Using a higher-wattage bulb can cause overheating and fire risk. Consider using LED bulbs for lower energy consumption and heat.
The lamp is designed with basic safety in mind: proper insulation, secure mounting, and a pull cord that keeps hands away from the electrical components. The E27 socket is rated for the specified wattage to prevent overheating.
Important: This is a Class I electrical appliance (requires earth connection via plug). Ensure your wall outlet is properly grounded.
Unplug the lamp before cleaning. Use a dry or slightly damp cloth to wipe the metal shade and other surfaces. Do not use abrasive cleaners, solvents, or liquids directly on the lamp.
CAUTION! Never immerse the lamp in water or other liquids. Do not clean while the lamp is hot. Ensure the lamp is completely dry before plugging it back in.
This product complies with relevant safety standards for electrical lighting equipment in North America. It bears the cETLus mark indicating compliance with U.S. and Canadian standards. Copyright and design rights belong to Inter IKEA Systems B.V. For more information, recycling instructions, or support, visit www.ikea.com or contact your local IKEA store.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Lamp does not turn on | No power / faulty bulb / loose connection | Check if the outlet works with another device. Ensure the bulb is properly screwed in and not burned out. Check the pull cord mechanism for damage. |
| Lamp flickers | Loose bulb / faulty bulb / poor connection | Turn off and unplug. Tighten the bulb. Try a different bulb. Check the plug connection in the outlet. |
| Lamp gets very hot | Bulb wattage too high | Immediately turn off and unplug. Replace the bulb with one that meets the max 60W rating (preferably an LED bulb which runs cooler). |
| Pull cord is stuck or broken | Mechanical failure | Do not force it. Unplug the lamp. The cord mechanism may need repair or replacement. Contact IKEA support. |
| Lamp is unstable or wobbles | Insecure mounting | Turn off and unplug. Reinforce the mounting bracket with appropriate hardware for your wall/ceiling type. Ensure all screws are tight. |
Service: For non-working products under warranty, contact IKEA customer service. Do not attempt to repair electrical components yourself.
Disposal: Dispose of the lamp according to local electronic waste regulations. The bulb may contain materials requiring special disposal (e.g., CFLs contain mercury).