IKEA HEKTAR 104.162.49 Work Lamp instructions manual

The IKEA HEKTAR 104.162.49 is a versatile work lamp featuring an adjustable arm and head for directional lighting, a sturdy clamp for secure attachment to desks, shelves, or workbenches, an on/off switch on the cord, and uses a max 7W E14 LED bulb (not included). Designed for focused task lighting in home offices, workshops, or craft areas. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. Installation & Mounting 4. Specifications 5. Controls and Operation 6. Connecting to Power 7. Adjusting the Lamp 8. Bulb Replacement 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable metal arm, Rotatable lamp head, Spring-loaded clamp with protective pads, On/off switch on power cord, E14 bulb socket.

Feature	Description
Adjustable arm	Flexible gooseneck design for positioning light direction
Rotatable lamp head	Allows 180-degree rotation to aim light precisely
Spring-loaded clamp	Securely attaches to surfaces up to 55mm thick
Protective clamp pads	Prevents scratches on mounting surface
On/off switch	Located on the power cord for easy access
E14 bulb socket	For screw-type LED bulb (max 7W)
Cable length	1.5 meter power cord
Material	Steel, aluminum, plastic
Color	Black finish
Intended use	Task lighting for reading, crafting, detailed work

Assembly Instructions

Unpack all parts. Check contents against parts list.

Attach lamp head to arm: Insert the threaded end of the arm into the head socket and tighten the locking nut by hand.
Connect arm to clamp base: Insert the lower end of the arm into the clamp assembly and secure with provided screw.
Install protective pads: Peel off backing and apply rubber pads to clamp jaws.
Insert bulb: Screw an E14 LED bulb (max 7W) into the socket. Do not overtighten.

WARNING! Ensure lamp is unplugged during assembly. Do not use bulbs exceeding 7W to prevent overheating.

Installation & Mounting

Choose a stable, flat surface for clamping.

Open clamp: Press the clamp handles to open jaws.
Position clamp: Place jaws over edge of desk, shelf, or workbench (max thickness 55mm).
Secure clamp: Release handles to allow spring tension to grip the surface. Ensure lamp is stable.
Adjust position: Bend arm and rotate head to direct light where needed.

CAUTION! Do not clamp onto fragile, uneven, or heated surfaces. Ensure clamp is fully engaged.

Specifications

Product Name: HEKTAR Work Lamp.
Article Number: 104.162.49.
Bulb Socket: E14 (small screw).
Max Bulb Power: 7W LED recommended.
Clamp Capacity: Fits surfaces up to 55mm thick.
Arm Length: Adjustable up to 40cm from clamp.
Cord Length: 1.5 meters.
Input Voltage: 100-240V AC, 50/60Hz.
Materials: Steel, aluminum, ABS plastic.
Color: Black.
Intended Use: Indoor task lighting.

Controls and Operation

Power switch on cord controls on/off function.

Operation: Plug into standard outlet. Press switch on cord to turn lamp on/off.

Adjustment: Manually bend arm to desired position. Rotate lamp head to aim light beam.

Note: This lamp has no dimmer function. Use appropriate brightness LED bulb for desired light level.

Connecting to Power

Use standard wall outlet. Ensure switch is off before plugging in.

Check bulb: Ensure correct E14 LED bulb is installed and secure.
Plug in: Insert power plug into grounded wall outlet.
Turn on: Press switch on cord to "I" position for on, "O" for off.

Tip: Route cord safely to avoid tripping hazards. Do not pinch cord in clamp.

Adjusting the Lamp

Arm and head are fully adjustable for precise lighting.

Bend arm: Gently bend the gooseneck arm to position light over work area.
Rotate head: Hold lamp head and rotate to direct beam exactly where needed.
Fine-tune: Make small adjustments while lamp is on to see effect.
Lock position: Arm will hold shape once released.

WARNING! Do not force adjustments beyond natural range. Do not bend arm sharply or repeatedly at same spot to avoid metal fatigue.

Bulb Replacement

Replace bulb when light output diminishes or fails.

Turn off and unplug: Ensure lamp is off and disconnected from power.
Allow to cool: Wait if bulb was recently on.
Remove old bulb: Unscrew bulb counterclockwise from E14 socket.
Insert new bulb: Screw in new E14 LED bulb (max 7W) clockwise until snug.
Test: Plug in and turn on to verify operation.

CAUTION! Use only LED bulbs rated for enclosed fixtures. Incandescent bulbs may overheat. Do not exceed 7W.

Care & Cleaning

Unplug lamp before cleaning. Wipe with dry or slightly damp cloth.

Cleaning: Use soft cloth. For stubborn dirt, use mild soap solution. Dry immediately.

CAUTION! Do not immerse lamp in water or use abrasive cleaners. Do not spray liquids directly onto lamp.

Regulatory Information

Complies with applicable EU directives and standards for electrical safety. CE marked. This product meets IKEA specifications for quality and safety. For recycling information, contact local authorities. IKEA and HEKTAR are trademarks of Inter IKEA Systems B.V.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / faulty bulb	Check outlet; ensure plug is secure; replace bulb; check switch position.
Lamp flickers	Loose bulb / poor connection	Turn off, unplug, and tighten bulb. Check socket for debris.
Lamp arm will not hold position	Arm over-extended / worn	Gently reposition; avoid extreme bends. If persistently loose, contact support.
Clamp slips	Surface too thick/smooth	Ensure surface ≤55mm thick. Clean clamp pads and surface. Tighten clamp screw if adjustable.
Overheating	Bulb wattage too high	Use only recommended 7W max LED bulb. Allow ventilation around lamp head.

Support: For assistance, visit IKEA website or contact local IKEA customer service.