IKEA HEDEVIKEN 294.262.05 Door instructions manual

The IKEA HEDEVIKEN 294.262.05 is a modern, hinged door designed for IKEA kitchen cabinets and storage units. It features a clean, handle-less design with a push-open mechanism, constructed from particleboard with a durable foil finish. Below are key sections for safety, features, installation, adjustment, care, and troubleshooting.

Features at a Glance

Key components: Door panel, concealed hinges, push-open mechanism, mounting screws, and adjustment tools.

Included Parts & Tools

Unpack and verify all components are present before starting installation.

1. Door Panel: 1 x HEDEVIKEN door (size as per model 294.262.05).
2. Hinges: 2 x concealed soft-close hinges (compatible with IKEA mounting plates).
3. Mounting Screws: Set of screws for attaching hinges to door and frame.
4. Push-Open Tabs: 2 x plastic tabs for push-open mechanism installation.
5. Adjustment Tool: 1 x hex key (Allen key) for hinge adjustments.
6. Instruction Manual: This guide.

WARNING! Ensure you have a stable work surface and proper tools (screwdriver, level) for safe installation.

Installation Instructions

Follow these steps to mount the door to your IKEA cabinet frame.

1. Prepare the Cabinet Frame: Ensure the frame is securely mounted to the wall and level.
2. Attach Hinges to Door:
   • Place door face down on a soft, protected surface.
   • Mark hinge mounting points as per template (if provided) or standard IKEA measurements.
   • Secure hinges to door using provided screws and a screwdriver.
3. Mount Door to Cabinet:
   • Align hinges with the mounting plates on the cabinet frame.
   • Engage hinges onto plates until they click into place.
   • Check that door is securely attached.
4. Install Push-Open Tabs:
   • Attach push-open tabs to the inside of the door at the top and bottom edges.
   • Ensure tabs are aligned with the corresponding catches on the cabinet frame.
5. Test Function: Gently push door to open; it should release smoothly. Close door to test soft-close action.

CAUTION! Door is heavy; use two people for handling to avoid injury or damage.

Specifications

• Model Number: HEDEVIKEN 294.262.05
• Type: Hinged Cabinet Door
• Dimensions: Refer to packaging for exact width, height, and thickness.
• Material: Particleboard with foil finish
• Weight: Varies by size; handle with care
• Hinge Type: Concealed, soft-closing, adjustable
• Mounting System: Compatible with IKEA standard hinge plates
• Finish Options: White, gray, ash effect, etc.
• Push-Open Mechanism: Integrated, requires compatible cabinet frame
• Load Rating: Suitable for standard cabinet contents

Hinge Adjustment Guide

Fine-tune door position using the 3-way adjustable hinges.

Tools Needed: Provided hex key (Allen key).

1. Height Adjustment:
   • Locate the vertical adjustment screw on the hinge.
   • Turn clockwise to raise the door; counterclockwise to lower.
   • Adjust until door is level with adjacent doors or frame.
2. Depth Adjustment:
   • Locate the depth adjustment screw (usually at the back of the hinge).
   • Turn to move door closer to or further from the cabinet frame.
   • Set for even gap across all doors.
3. Side-to-Side (Horizontal) Adjustment:
   • Locate the horizontal adjustment screw on the hinge body.
   • Turn to shift door left or right for perfect alignment.
4. Test: After each adjustment, open and close door to check alignment and function.

Tip: Make small adjustments and test frequently for best results.

Mounting & Alignment

Ensure door is perfectly aligned for smooth operation and aesthetic appeal.

1. Check that cabinet frame is level and plumb using a spirit level.
2. Mount all doors loosely at first to allow for final alignment adjustments.
3. Adjust hinges as described in Section 6 to achieve:
   • Even gaps (approx. 2-3mm) between doors.
   • Doors flush with each other and the cabinet frame.
   • Smooth opening and closing without binding.
4. Tighten all screws securely once alignment is perfect.

WARNING! Do not overtighten screws as this may damage the door material or hinge mechanism.

Push-Open Mechanism Setup

The door features a push-to-open mechanism for a handle-less look.

1. Verify Compatibility: Ensure your cabinet frame has the corresponding push-open catches installed.
2. Install Push Tabs:
   • Attach the provided plastic tabs to the inside top and bottom of the door.
   • Use the provided screws and align tabs as per instructions.
3. Adjustment:
   • If door does not open easily, adjust tab position slightly forward.
   • If door does not stay closed, adjust tab position slightly backward.
4. Test: Push door gently; it should release and open smoothly. Close to engage soft-close.

Note: Mechanism may require fine-tuning for optimal performance.

Care & Maintenance

Proper care ensures long-lasting beauty and function.

1. Cleaning:
   • Use a soft, damp cloth with mild soapy water.
   • Wipe gently; avoid abrasive cleaners or scouring pads.
   • Dry immediately with a soft cloth.
2. Maintenance:
   • Periodically check hinge screws for tightness.
   • Lubricate hinge mechanism if needed with a dry silicone spray (avoid oil).
   • Inspect push-open tabs for wear and replace if damaged.

CAUTION! Do not use harsh chemicals, ammonia-based cleaners, or excessive water. Avoid direct heat sources.

Regulatory Information

This product complies with applicable furniture safety standards. IKEA and HEDEVIKEN are trademarks of Inter IKEA Systems B.V. For warranty information, refer to the IKEA limited warranty. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Replacement Parts: Hinges and push-open tabs are available for purchase at IKEA stores or online.

Customer Service: Visit www.ikea.com or call your local IKEA store for assistance.