IKEA HEDEVIKEN 094.398.26 Door instructions manual

The IKEA HEDEVIKEN 094.398.26 is a modern, hinged door designed for IKEA kitchen cabinets and storage solutions. It features a clean, handle-free design with a push-open mechanism, adjustable hinges for precise alignment, and is compatible with various IKEA cabinet frames. Below are key sections for safety, features, installation, setup, operation, and maintenance.

1. Features at a Glance 2. Package Contents 3. Tools Required 4. Specifications 5. Installation Instructions 6. Hinge Adjustment 7. Push-Open Mechanism Setup 8. Care & Cleaning 9. Safety Information 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Door panel, concealed hinges, push-open mechanism, mounting screws, and adjustment tools.

FeatureDescription
Handle-free designClean look with integrated push-open mechanism
Adjustable hinges3-way adjustment (height, depth, side) for perfect alignment
Soft-closingIntegrated damper for quiet, gentle closing
MaterialHigh-pressure laminate surface, particleboard core
Mounting systemCompatible with IKEA METOD and SEKTION cabinet frames
FinishAvailable in various colors and finishes
Push-open mechanismAllows opening without handles; can be disabled
Weight capacityDesigned for standard cabinet loads
Safety featureChild lock option available
Edge bandingPVC edge banding for durability

Package Contents

Unpack and verify all parts before installation.

  1. HEDEVIKEN door panel (1 piece)
  2. Concealed hinges (2 pieces)
  3. Mounting screws for hinges
  4. Push-open mechanism components
  5. Adjustment screws and covers
  6. Instruction manual

WARNING! Check for shipping damage before installation. Do not install damaged parts.

Tools Required

Gather these tools before starting installation.

  1. Phillips screwdriver (size #2)
  2. Drill with 5mm drill bit (if pre-drilled holes are not present)
  3. Measuring tape
  4. Level
  5. Pencil for marking
  6. Allen key (included with hinges)

CAUTION! Use appropriate safety gear when drilling.

Specifications

Installation Instructions

Follow these steps to install the door on your IKEA cabinet.

  1. Prepare cabinet: Ensure cabinet frame is level and securely mounted to wall.
  2. Mark hinge positions: Use template or measure 22mm from door edge for hinge cup.
  3. Drill hinge cups: Drill 35mm diameter, 13mm deep holes at marked positions.
  4. Install hinges: Insert hinges into cups and tighten screws.
  5. Mount door: Align hinges with mounting plates on cabinet, press until click.
  6. Secure door: Tighten mounting screws to secure door to cabinet.
  7. Test operation: Open and close door to check alignment and movement.

Tip: Install doors before adding shelves or contents to cabinet.

Hinge Adjustment

Adjust hinges for perfect door alignment using the 3-way adjustment system.

  1. Height adjustment: Turn vertical screw to raise or lower door.
  2. Depth adjustment: Turn horizontal screw to move door closer to or further from frame.
  3. Side adjustment: Turn side screw to adjust door left or right.
  4. Final check: Ensure even gaps (2-3mm) between doors and frame.

Note: Make small adjustments and test after each turn.

Push-Open Mechanism Setup

Configure the push-open mechanism for handle-free operation.

  1. Locate mechanism: Find push-open device inside cabinet frame.
  2. Adjust sensitivity: Turn adjustment screw to set opening pressure.
  3. Test function: Push door gently; it should open smoothly.
  4. Disable if needed: Remove mechanism for traditional handle use.
  5. Child lock option: Install child safety lock if required.

WARNING! Ensure mechanism doesn't interfere with cabinet contents.

Care & Cleaning

Proper maintenance ensures long-lasting appearance and function.

  1. Use soft, damp cloth with mild detergent
  2. Wipe in direction of grain/pattern
  3. Dry immediately with clean cloth
  4. Avoid abrasive cleaners or scouring pads
  5. Don't use solvents or harsh chemicals

CAUTION! Avoid excessive moisture; never soak the door.

Safety Information

Important safety considerations for installation and use.

WARNING! Cabinets must be properly anchored to wall.

Warranty & Support

IKEA limited warranty applies. For product support:

Copyright © IKEA. HEDEVIKEN is a trademark of Inter IKEA Systems B.V.

Troubleshooting

SymptomPossible CauseCorrective Action
Door doesn't close properlyMisaligned hingesAdjust hinge height/depth/side settings
Door sagsLoose hinges or overloadTighten hinge screws; reduce cabinet load
Push-open doesn't workMechanism not engagedAdjust sensitivity; ensure proper installation
Uneven gapsFrame not levelLevel cabinet frame; adjust hinges
Door sticksHumidity swellingAllow acclimation; adjust hinge depth
Hinge looseWorn or damaged hingeReplace hinge with IKEA spare part

Replacement parts: Available at IKEA stores or website.

Service: Contact IKEA customer service for assistance.

IKEA HEDEVIKEN 094.398.26 Door instructions manual © - All Rights Reserved 2025