IKEA HAVSTA 404.042.02 Table instructions manual

The IKEA HAVSTA 404.042.02 is a versatile table from the HAVSTA series, designed for durability and style. This manual provides essential information for safe assembly, use, and maintenance. Below are key sections covering safety, parts identification, step-by-step assembly, care instructions, and warranty details.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Care & Maintenance 6. Warranty Information 7. Troubleshooting

Parts & Hardware

Before assembly, verify all parts are present. Key components include tabletop, legs, support beams, and hardware package.

Part NameDescriptionQuantity
TabletopMain surface, pre-drilled1
LegSolid wood leg with pre-attached fittings4
Support BeamCross beam for stability2
Cam LockFor securing legs to tabletop8
ScrewM6 x 45mm16
Allen Key5mm, included for assembly1
Wooden Dowel10mm diameter, for alignment8

Safety Information

Read all instructions before assembly. Ensure a safe working environment.

  1. Work on a clean, flat surface to prevent damage or misalignment.
  2. Use provided tools only; improper tools may damage parts.
  3. Assemble with another person for stability when attaching legs.
  4. Keep small hardware away from children to avoid choking hazards.
  5. Do not stand or sit on the table; it is designed for normal household use.

WARNING! Table is heavy; lift with care to avoid injury. Ensure all connections are tight before use.

Assembly Instructions

Follow steps in order. Allow 30-45 minutes for assembly.

  1. Prepare: Unpack all parts and lay them on a soft surface to prevent scratches.
  2. Attach Legs: Insert wooden dowels into pre-drilled holes on tabletop underside. Align leg fittings with dowels and cam locks. Turn cam locks clockwise to lock (listen for click).
  3. Secure Support Beams: Position beams between legs. Use screws and Allen key to fasten beams to legs and tabletop.
  4. Final Check: Ensure all cam locks are fully turned and screws are tight. Wipe clean with dry cloth.

Tip: Do not overtighten screws; this may strip the wood. Assemble on carpet or blanket to protect surfaces.

Specifications

Care & Maintenance

Proper care ensures longevity and appearance.

  1. Cleaning: Wipe with dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
  2. Protection: Use coasters under hot or wet items to prevent rings and heat marks.
  3. Environment: Avoid direct sunlight and high humidity to prevent warping or fading.
  4. Moving: Lift table; do not drag across floor to avoid leg damage.

CAUTION! Never use steel wool or harsh chemicals; they may damage the finish.

Warranty Information

IKEA Limited Warranty covers manufacturing defects for 10 years from date of purchase. Keep receipt as proof.

Troubleshooting

IssuePossible CauseSolution
Table wobblesUneven floor or loose legsCheck floor level; tighten all cam locks and screws.
Leg does not attachMisaligned dowels or cam lockRealign dowels; ensure cam lock turns fully clockwise.
Scratches on surfaceAssembly on hard surfaceAssemble on soft blanket; use touch-up pen (sold separately).
Screw won't tightenStripped hole or wrong screwVerify correct screw; if stripped, use wood filler and re-drill.
Finish appears dullImproper cleaningClean with recommended cloth; apply furniture polish if needed.

Note: For missing parts or damage, contact IKEA with product number and receipt.

Support: 1-888-888-4532; www.ikea.com

IKEA HAVSTA 404.042.02 Table instructions manual © - All Rights Reserved 2025