IKEA HAVSTA 192.752.35 Shelving Unit instructions manual

The IKEA HAVSTA 192.752.35 is a versatile shelving unit designed for living rooms, offices, or hallways. It features a sturdy metal frame with glass doors and wooden shelves, offering both open and closed storage. The unit requires assembly and includes adjustable shelves, safety glass, and a lockable door. Below are key sections for safety, parts list, assembly instructions, care, and troubleshooting.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Adjusting & Leveling 6. Care & Maintenance 7. Mounting to Wall 8. Door & Lock Operation 9. Warranty Information 10. Regulatory Information 11. Troubleshooting

Parts & Hardware Included

Key components: Metal frame panels, glass doors, wooden shelves, hinges, screws, cam locks, wall attachment brackets, keys.

Part DescriptionQuantity
Side Panel (Metal)2
Top/Bottom Panel (Metal)2
Back Panel (Fiberboard)1
Glass Door with Frame1
Adjustable Wooden Shelf3
Hinge Set2
Cam Lock with Key1 set
Wall Attachment Bracket2
Screws & Dowels1 packet
Assembly Tool (Hex Key)1

Safety Information

Read all instructions before assembly. Use on stable, level surface.

  1. Assembly: Requires two people. Keep children and pets away during assembly.
  2. Glass doors: Handle with care; edges may be sharp. Use gloves if needed.
  3. Weight limit: Do not exceed 55 lbs (25 kg) per shelf. Distribute weight evenly.
  4. Wall mounting: MUST be attached to wall to prevent tipping, especially if children are present.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall using the provided anti-tip device.

Assembly Instructions

Lay all parts on a soft surface to avoid scratches. Follow steps in order.

  1. Attach side panels to bottom panel using cam locks and screws (Step A in manual).
  2. Insert back panel into grooves on side and bottom panels (Step B).
  3. Attach top panel using same method as bottom (Step C).
  4. Install adjustable shelf supports at desired heights (Step D).
  5. Place wooden shelves on supports (Step E).
  6. Attach hinges to side panel and glass door (Step F).
  7. Hang door on hinges and adjust alignment if necessary (Step G).
  8. Install cam lock into door and test with key (Step H).
  9. Attach wall brackets to back panel and secure to wall studs (Step I).

CAUTION! Do not overtighten screws; use hand tools only. Ensure all connections are secure before use.

Specifications

Adjusting & Leveling

Shelves can be adjusted without tools. Doors may need alignment after assembly.

Shelf Adjustment: Lift shelf up and out of supports. Reposition supports to desired height (pre-drilled holes). Lower shelf onto supports.

Door Alignment: Loosen hinge screws slightly with hex key. Adjust door up/down or in/out. Retighten screws.

Leveling: If unit rocks on floor, adjust plastic glides on bottom corners by twisting clockwise/ counterclockwise.

Care & Maintenance

Clean with damp cloth; dry immediately. Avoid harsh chemicals.

  1. Metal frame: Wipe with soft, damp cloth. Use mild soap if needed.
  2. Wood shelves: Dust regularly. Wipe with slightly damp cloth; do not soak.
  3. Glass door: Use glass cleaner and soft cloth. Avoid abrasive materials.
  4. Hardware: Check screws and brackets periodically for tightness.

Tip: Do not place near heat sources or in direct sunlight for extended periods to prevent fading or warping.

Mounting to Wall

CRITICAL SAFETY STEP: This furniture must be secured to the wall to prevent tip-over.

  1. Locate wall studs using a stud finder. Mark positions.
  2. Hold bracket against back panel in upper section. Mark screw holes.
  3. Pre-drill holes at marks (for wood studs).
  4. Attach bracket to furniture with provided screws.
  5. Align furniture with wall. Secure bracket to wall studs using suitable screws (not always provided; may need to purchase appropriate for your wall type).
  6. Repeat for second bracket (lower section recommended).
  7. Test stability by gently pulling top of unit forward.

WARNING! If you cannot secure the furniture to the wall, place it in an area where it cannot be tipped, such as a corner. Never place TVs or other heavy objects on top.

Door & Lock Operation

Door opens on hinges. Lock secures door for privacy or safety.

  1. Opening/Closing: Pull handle gently. Ensure door is fully closed before locking.
  2. Locking: Insert key, turn clockwise until it stops. Remove key.
  3. Unlocking: Insert key, turn counterclockwise. Turn handle to open.
  4. Key Storage: Store keys in a safe place away from children.

Note: If key is lost, contact IKEA for replacement lock set (part number provided on manual cover).

Warranty Information

IKEA of Sweden AB offers a 10-year limited warranty. This warranty covers defects in materials and workmanship under normal household use. Proof of purchase (receipt) is required.

What is covered: Manufacturing faults in frame, shelves, doors, and hardware.

What is not covered: Damage from incorrect assembly, accidents, misuse, modification, or commercial use. Normal wear and tear, fading, or damage from failure to follow care instructions.

For warranty claims, contact your local IKEA store with your receipt and product information.

Regulatory Information

This product meets applicable safety and performance standards. Materials comply with IKEA strict internal chemical use policies. Glass is safety-tempered. For environmental information and recycling, visit www.ikea.com. Copyright © IKEA of Sweden AB. HAVSTA is a trademark of Inter IKEA Systems B.V.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit wobblesUneven floor / Loose screwsAdjust leveling glides; check and tighten all frame screws.
Door does not close properlyMisaligned hinges / Warped frameLoosen hinge screws, realign door, retighten. Ensure assembly was on flat surface.
Shelf sagsWeight limit exceededRemove excess weight. Distribute weight evenly. Max 55 lbs per shelf.
Key does not turnLock mechanism jammed / Wrong keyEnsure door is fully closed. Try turning key gently while applying slight pressure to door. Verify it's the correct key.
Scratches on assemblyParts laid on hard surfaceAssemble on carpet or cardboard. Minor scratches can be touched up with matching marker (sold separately).

Missing Parts? Contact IKEA customer service with article number (192.752.35) for replacement parts.

IKEA Customer Support: Visit www.ikea.com or call your local IKEA store.

IKEA HAVSTA 192.752.35 Shelving Unit instructions manual © - All Rights Reserved 2025