IKEA HAVSTA 092.659.20 with Base Cabinet instructions manual

The IKEA HAVSTA 092.659.20 is a base cabinet unit designed for the HAVSTA storage series, featuring a classic frame design with a solid wood look, adjustable shelves, soft-closing doors, and a sturdy construction. It is designed for assembly and installation in home storage areas, offering versatile storage solutions. Below are key sections for safety, parts list, assembly instructions, installation, care, and warranty information.

Parts & Hardware Included

Verify all parts before starting assembly. Contact IKEA if any parts are missing.

Safety Information

Read all instructions before assembly. Ensure a safe working environment.

1. Work Area: Assemble on a clean, flat, protected surface to avoid scratches.
2. Lifting: Cabinet is heavy; use two people for lifting and positioning.
3. Children & Pets: Keep small parts away from children during assembly.
4. Tools: Use only the provided tool or appropriate screwdrivers; do not overtighten.
5. Wall Anchoring: To prevent tipping, secure cabinet to wall using appropriate wall anchors (not included).

WARNING! Failure to secure cabinet to wall can result in serious injury or death from tipping.

Assembly Instructions

Follow steps in order. Do not fully tighten screws until structure is square.

1. Prepare Panels: Lay side panels (A, B) flat. Insert wooden dowels (K) into pre-drilled holes.
2. Attach Bottom Panel: Connect bottom panel (E) to side panels using cam locks (I, J).
3. Attach Back Panel: Slide back panel (C) into grooves on side and bottom panels.
4. Attach Top Panel: Connect top panel (D) to side panels using remaining cam locks.
5. Install Base Frame: Attach the base frame/kick plate (H) to the bottom of the cabinet.
6. Install Adjustable Feet: Screw the four adjustable feet (L) into the base frame.
7. Install Shelves: Place adjustable shelves (F) on shelf support pins (pre-installed).
8. Attach Doors: Hang door panels (G) by aligning hinges with mounting plates on side panels. Click into place.
9. Attach Handles: Screw door handles (M) to doors using provided screws.
10. Final Check: Ensure all cam locks are fully tightened with a quarter turn. Check that doors open and close smoothly.

Tip: Adjust door alignment using the screws on the hinges if doors are uneven.

Installation Guide

Position the cabinet in its final location before securing to the wall.

1. Level the Cabinet: Use a spirit level on the top. Adjust the feet (L) by turning clockwise to raise or counter-clockwise to lower.
2. Plan Wall Attachment: Locate wall studs using a stud finder. Mark drilling points on the cabinet's back panel (near the top).
3. Secure to Wall: Use suitable wall anchors and screws (not included) that are appropriate for your wall type (drywall, plaster, etc.). Drive screws through the pre-drilled holes in the back panel and into the wall studs or anchors.
4. Final Level Check: Re-check that the cabinet is level after securing.

CAUTION! Do not place heavy objects on open doors. Distribute weight evenly on shelves.

Adjustments & Leveling

Doors and shelves can be adjusted after installation.

• Door Alignment: Open door fully. Use the provided Allen key to adjust the vertical and horizontal screws on the hinge. Tighten or loosen to align doors evenly.
• Soft-Close Feature: The hinge has a built-in soft-close mechanism. If door closes too quickly or slowly, adjust the tension screw on the side of the hinge.
• Shelf Height: Shelves are adjustable. To change height, lift shelf up and out, then reposition shelf support pins in the desired holes and replace shelf.
• Leveling Feet: If cabinet rocks, adjust individual feet until stable.

Care & Maintenance

Proper care will maintain the appearance and function of your cabinet.

1. Cleaning: Wipe surfaces with a soft, damp cloth. Use a mild soap solution if needed. Dry immediately.
2. Avoid: Do not use abrasive cleaners, scouring pads, or harsh chemicals. Avoid excessive water.
3. Protection: Avoid placing hot items directly on surfaces. Use coasters under glasses and vases.
4. Hardware Check: Periodically check that cam locks, hinges, and handles are secure. Tighten if necessary.

WARNING! Never drag the cabinet across the floor. Lift it to move.

Technical Specifications

• Product Name: HAVSTA Base Cabinet with 2 doors.
• Article Number: 092.659.20
• Dimensions (W x H x D): 80cm x 90cm x 48cm (31 1/2" x 35 3/8" x 18 7/8")
• Max Shelf Load: 15 kg (33 lbs) per shelf.
• Material: Frame: Particleboard, Foil; Door: Particleboard, Foil, Solid wood (acacia veneer).
• Finish: Dark brown.
• Hinge Type: Soft-closing, adjustable.
• Weight: Approximately 35 kg (77 lbs).

Troubleshooting

Warranty & Support

IKEA limited warranty applies. See IKEA warranty terms for details.

• Warranty Period: Refer to the IKEA warranty card included with your purchase or the IKEA website for your country.
• Support: For missing parts, assembly help, or other inquiries:
  • Visit: www.ikea.com
  • Contact your local IKEA store.
  • Use the IKEA app for assembly instructions (search by article number 092.659.20).
• Recycling: At end of life, disassemble and recycle materials according to local regulations.

Note: This manual is a guide. Always refer to the latest assembly guide packed with the product for any updates.