IKEA HAVSTA 004.151.94 Cabinet instructions manual

The IKEA HAVSTA 004.151.94 is a versatile cabinet designed for living room, hallway, or bedroom storage. It features a classic frame design with glass doors, adjustable shelves, and a choice of finishes. The cabinet requires assembly and comes with all necessary hardware and step-by-step instructions. Below are key sections for safety, parts list, assembly, installation, care, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Installation & Placement 5. Care & Maintenance 6. Specifications 7. Troubleshooting 8. Warranty & Support

Parts & Hardware

Before assembly, check that all parts are present and undamaged.

Part DescriptionQuantityImage Ref.
Cabinet Frame Side Panel2A1, A2
Cabinet Top Panel1B
Cabinet Bottom Panel1C
Back Panel1D
Adjustable Shelves2E1, E2
Glass Door with Hinge2F1, F2
Door Handles2G1, G2
Cam Lock Nuts10H
Screws (Various sizes)1 packI
Wall Attachment Device1 setJ

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

  1. Stability Warning: To prevent tip-over, this cabinet must be securely anchored to the wall using the provided wall attachment device.
  2. Lifting: Cabinet is heavy; use two people for lifting and moving.
  3. Tools: Use only the included Allen key and screwdriver. Do not overtighten screws.
  4. Glass Doors: Handle with care. Glass can break and cause injury.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure to wall.

Assembly Steps

Follow steps in numerical order. Allow 60-90 minutes for assembly.

  1. Prepare Workspace: Lay out all parts on a soft, clean surface to avoid scratches.
  2. Assemble Frame: Connect side panels (A1, A2) to top panel (B) and bottom panel (C) using cam locks (H) and screws (I).
  3. Attach Back Panel: Slide back panel (D) into grooves on frame. Secure with provided screws.
  4. Install Shelves: Insert adjustable shelves (E1, E2) into desired height positions using shelf pins.
  5. Mount Doors: Attach glass doors (F1, F2) to frame using hinges. Adjust hinge screws to align doors properly.
  6. Attach Handles: Screw door handles (G1, G2) to doors as per design preference.
  7. Wall Attachment: Secure cabinet to wall studs using wall attachment device (J).

Tip: Do not fully tighten all screws until entire frame is assembled to allow for adjustments.

Installation & Placement

CAUTION! Never place TV or heavy objects on top of cabinet. Not designed for top loading.

Care & Maintenance

Clean with a soft, damp cloth. Do not use abrasive cleaners, scouring pads, or solvents.

  1. Wood Surfaces: Wipe with mild soap solution, then dry immediately.
  2. Glass Doors: Use glass cleaner and soft cloth. Avoid spraying directly on edges.
  3. Hardware: Periodically check and tighten screws and wall attachments.

WARNING! Never use steam cleaners. Moisture can damage wood and metal parts.

Specifications

Troubleshooting

IssuePossible CauseSolution
Doors not alignedHinges not adjusted properlyLoosen hinge screws, align door, retighten.
Shelves not levelShelf pins not inserted evenlyRemove shelf, ensure pins are at same height on both sides.
Frame wobblyCam locks not fully tightened or wall not anchoredTighten all cam locks with Allen key. Ensure cabinet is secured to wall.
Scratches during assemblyAssembled on hard surfaceUse cardboard or blanket under parts during assembly.
Missing partsPackage incompleteContact IKEA customer service with article number for replacement parts.

Warranty & Support

IKEA limited warranty applies. See IKEA terms and conditions for details.

Customer Service: For missing parts, assembly help, or product questions:

Recycling: Dispose of packaging responsibly. Product is recyclable where facilities exist.

IKEA HAVSTA 004.151.94 Cabinet instructions manual © - All Rights Reserved 2025