IKEA HAUGA 194.438.80 Cabinet instructions manual

The IKEA HAUGA 194.438.80 is a versatile cabinet from the HAUGA series, designed for living rooms, bedrooms, or hallways. It features a modern design with a white finish, adjustable shelves, soft-closing doors, and concealed hinges. The cabinet requires assembly and is constructed from particleboard, fiberboard, and ABS plastic. Below are key sections for safety, parts list, assembly instructions, installation, care, and warranty information.

Parts & Hardware Included

Before assembly, verify all parts are present. Check against the packaging list.

NOTE: If any part is missing, contact IKEA customer service.

Safety Information

Read all instructions before assembly. Ensure a safe workspace.

1. Work Area: Use a clean, flat surface to prevent damage.
2. Lifting: Cabinet is heavy; use two people for lifting and assembly.
3. Children: Keep small parts away from children to avoid choking.
4. Tools: Use only the provided tool; do not overtighten screws.
5. Stability: Always secure cabinet to wall to prevent tipping.

WARNING! Failure to secure cabinet to wall can cause serious injury or death from tipping.

Assembly Instructions

Follow steps in order. Allow 60-90 minutes for assembly.

1. Step 1: Lay side panels (A, B) flat. Insert dowels into pre-drilled holes.
2. Step 2: Attach top panel (C) and bottom panel (D) to side panels using cam locks.
3. Step 3: Secure back panel (E) with provided screws; ensure it is flush.
4. Step 4: Insert adjustable shelves (F) onto shelf pins; adjust height as needed.
5. Step 5: Attach door hinges to doors (G), then mount doors to cabinet frame.
6. Step 6: Adjust door alignment using hinge screws for even gaps.
7. Step 7: Install soft-close mechanism if not pre-installed.

Tip: Do not fully tighten cam locks until all panels are aligned.

Installation & Leveling

Proper installation ensures stability and function.

1. Place cabinet in desired location against wall.
2. Use a level to check that cabinet is horizontal; adjust feet if provided.
3. Locate wall studs using a stud finder.
4. Attach anti-tip bracket (included) to wall stud with screws.
5. Secure cabinet to bracket through back panel.
6. Re-check level after securing.

CAUTION! Do not place heavy objects on top unless designed for load.

Adjusting Doors & Shelves

Fine-tune for optimal operation.

• Door Alignment: Loosen hinge screws slightly, adjust door up/down or left/right, then retighten.
• Soft-Close: If door slams, ensure hinge mechanism is engaged; adjust tension screw on hinge.
• Shelf Height: Remove shelf, reposition shelf pins, and replace shelf. Max load: 15 kg per shelf.
• Door Handles: Optional handles can be attached per IKEA instructions.

Care & Maintenance

Proper care extends cabinet life.

1. Cleaning: Wipe with a damp cloth; dry immediately. Do not use abrasive cleaners.
2. Stains: Use mild soap solution; avoid solvents.
3. Hardware: Periodically check hinge and cam lock tightness.
4. Avoid: Direct sunlight, heat sources, and excessive moisture.

WARNING! Never use steam cleaners or harsh chemicals.

Technical Specifications

• Model: HAUGA 194.438.80
• Dimensions (W x H x D): 80 cm x 120 cm x 40 cm
• Weight: 28 kg (assembled)
• Material: Particleboard, Fiberboard, ABS plastic
• Finish: White, Matte
• Door Type: Soft-closing, hinged
• Shelf Capacity: 15 kg per shelf
• Warranty: 10-year limited warranty

Warranty & Support

IKEA offers a 10-year limited warranty against manufacturing defects.

Coverage: Defects in materials/workmanship under normal use.

Exclusions: Damage from improper assembly, accidents, or modifications.

Support: For missing parts or assistance, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com.

Troubleshooting

Replacement Parts: Order via IKEA website or store.

Service: 1-888-888-4532; www.ikea.com