IKEA HAUGA 004.150.47 TV Stand instructions manual

The IKEA HAUGA 004.150.47 is a versatile TV stand designed for living rooms, offering storage space for media equipment and accessories. It features a clean Scandinavian design, durable particleboard construction with foil finish, cable management solutions, adjustable shelves, and sturdy metal legs. Below are key sections for safety, assembly, features, installation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents & Tools Needed 3. Safety Instructions 4. Assembly Instructions 5. Specifications 6. Installation & Placement 7. Using the TV Stand 8. Care & Maintenance 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: Main frame, adjustable shelves, rear panel with cable ports, metal legs, assembly hardware.

FeatureDescription
DesignModern Scandinavian style with clean lines
MaterialParticleboard with foil finish, metal legs
StorageAdjustable shelves for flexible organization
Cable ManagementRear cable ports to hide wires
DimensionsWidth: 47 1/4" (120 cm), Depth: 15 3/4" (40 cm), Height: 19 5/8" (50 cm)
Weight CapacityMax load: 110 lbs (50 kg) distributed evenly
ColorWhite foil finish
LegsAdjustable leveling feet for stability
AssemblyTool-free cam lock system with included Allen key
CompatibilityFits most TVs up to 65 inches

Package Contents & Tools Needed

Unpack and verify all parts before assembly.

  1. Main parts: Side panels (2), top panel (1), bottom panel (1), rear panel (1), shelves (2), legs (4).
  2. Hardware: Cam locks (8), screws (16), dowels (12), adjustable feet (4), Allen key (1).
  3. Tools needed: Phillips screwdriver (optional), soft mallet, level.

WARNING! Check for damaged parts; contact IKEA if anything is missing or defective.

Safety Instructions

Follow these guidelines to ensure safe assembly and use.

  1. Assemble on a soft, clean surface to avoid scratches.
  2. Use two people for lifting and positioning.
  3. Ensure the stand is on a level, stable floor.
  4. Do not exceed the maximum weight capacity.
  5. Secure heavy items (TVs, speakers) to prevent tipping.
  6. Keep away from direct heat sources and moisture.

CAUTION! Always secure your TV to the stand or wall to prevent tip-over accidents.

Assembly Instructions

Estimated assembly time: 45-60 minutes.

  1. Step 1: Attach legs to bottom panel using provided screws.
  2. Step 2: Connect side panels to bottom panel using cam locks and dowels.
  3. Step 3: Insert adjustable shelves into desired positions.
  4. Step 4: Attach top panel to side panels using cam locks.
  5. Step 5: Secure rear panel with screws to add stability.
  6. Step 6: Adjust leveling feet to ensure stand is stable.
  7. Step 7: Route cables through rear ports for a tidy appearance.

Tip: Do not overtighten cam locks; hand-tighten only.

Specifications

Installation & Placement

Choose location carefully before final placement.

  1. Place stand on a level, solid floor (not carpet alone).
  2. Ensure adequate ventilation around electronic components.
  3. Position away from direct sunlight to prevent fading.
  4. Use a level to check stability; adjust feet as needed.
  5. For wall mounting TVs, use appropriate brackets and follow TV manual.

WARNING! Do not place on uneven surfaces; risk of tipping.

Using the TV Stand

Optimize storage and cable management.

  1. Adjust Shelves: Lift and reposition shelves to accommodate different components.
  2. Cable Management: Route cables through rear ports; use ties to bundle.
  3. Weight Distribution: Place heaviest items (TV, center speaker) at bottom.
  4. Ventilation: Leave space around AV receivers and game consoles.
  5. Cleaning Access: Keep front area clear for easy dusting.

Tip: Label cables for easy identification during setup.

Care & Maintenance

Proper care extends product life.

  1. Dust regularly with a soft, dry cloth.
  2. For stains, use mild soapy water; wipe dry immediately.
  3. Do not use abrasive cleaners, solvents, or scouring pads.
  4. Avoid placing hot items or wet glasses directly on surface.
  5. Check tightness of screws and cam locks periodically.

CAUTION! Never use wax, polish, or silicone-based products on foil surfaces.

Warranty Information

IKEA offers a 10-year limited warranty against manufacturing defects. Warranty covers material and workmanship under normal household use. Proof of purchase required. Does not cover damage from improper assembly, accidents, modification, or commercial use. For warranty claims, contact IKEA customer service with article number and receipt.

Troubleshooting

SymptomPossible CauseCorrective Action
Stand wobblesUneven floor or loose legsAdjust leveling feet; tighten leg screws.
Shelves saggingWeight exceeded or uneven loadRedistribute weight; do not exceed capacity.
Cam locks not holdingNot fully tightened or cross-threadedDisassemble and re-engage; hand-tighten only.
Scratches on surfaceAbrasive cleaning or sharp objectsUse felt pads under items; clean gently.
Doors/drawers not alignedImproper assembly or swollen materialCheck assembly steps; ensure room humidity is stable.

Replacement Parts: Contact IKEA for spare hardware.

Customer Service: 1-888-888-4532 (IKEA-USA); www.ikea-usa.com

IKEA HAUGA 004.150.47 TV Stand instructions manual © - All Rights Reserved 2025