IKEA HÖGÖN 004.453.51 Umbrella instructions manual

The IKEA HÖGÖN 004.453.51 is a freestanding outdoor umbrella designed for patios, decks, and gardens. It features a tilt mechanism for sun angle adjustment, a sturdy base for stability, a wind vent for airflow, and a durable polyester canopy. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Positioning & Stability 7. Tilt & Angle Adjustment 8. Safety Features 9. Care & Maintenance 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Polyester canopy, Aluminum pole, Tilt crank handle, Wind vent, Weighted base, Carry handle.

FeatureDescription
Polyester canopyWater-resistant, UV-protected fabric
Aluminum poleLightweight, rust-resistant frame
Tilt crank handleFor adjusting umbrella angle
Wind ventAllows air to pass through, reducing wind catch
Weighted baseProvides stability (sand/water fillable)
Carry handleFor easy relocation
Open/Close mechanismPulley system with push-up/pull-down operation
Locking pinSecures umbrella in open position
Protective coverIncluded for storage
Mounting optionsFreestanding or through-table

Assembly Instructions

Unpack all parts and check contents against parts list. Assemble on a flat, clean surface.

  1. Attach pole sections: Connect upper and lower pole sections, tighten locking screws.
  2. Install canopy: Slide canopy over top frame, secure with provided fasteners.
  3. Attach ribs: Connect canopy ribs to hub and pole top, ensuring even tension.
  4. Assemble base: Fill base with sand or water as per weight requirements for stability.
  5. Insert pole into base: Lower pole into base socket, secure with locking bolt.

WARNING! Umbrella is large; assembly is easier with two people. Ensure all connections are tight before use.

First-Time Setup

After assembly, position umbrella in desired location.

  1. Fill base: Add sand or water to base until stable (check weight guidelines).
  2. Open umbrella: Pull down on pulley rope until canopy fully opens, engage locking pin.
  3. Test tilt: Use crank handle to tilt canopy, ensure smooth operation.
  4. Adjust height: If adjustable, set pole to desired height and lock.

CAUTION! Do not use umbrella in high winds. Ensure base is adequately weighted.

Specifications

Controls and Operation

Open/Close: Use pulley rope to raise/lower canopy. Engage locking pin when fully open. Tilt Adjustment: Turn crank handle clockwise/counterclockwise to tilt canopy. Locking: Ensure all locks are engaged before leaving umbrella unattended.

Daily Use: Open fully for shade, tilt to block sun from different angles. Close and secure with strap when not in use.

Positioning & Stability

Place on level ground. Ensure base is filled adequately (sand recommended for windier areas).

  1. Choose location away from overhead obstacles.
  2. Fill base according to weather conditions (more weight for wind).
  3. Check stability by gently pushing pole after setup.

Tip: For through-table use, ensure table hole diameter matches pole diameter.

Tilt & Angle Adjustment

The tilt function allows you to block sun at different angles throughout the day.

  1. Locate tilt crank on pole.
  2. Turn clockwise to tilt canopy forward.
  3. Turn counterclockwise to tilt backward or return to center.
  4. Do not force beyond stop points.

WARNING! Do not adjust tilt in windy conditions. Ensure canopy is secure before tilting.

Safety Features

Wind Vent: Reduces wind resistance by allowing air to pass through. Locking Pin: Prevents accidental closing. Sturdy Base: Prevents tipping when properly weighted.

Safety Tips: Close umbrella in high winds. Keep away from fire sources. Do not hang items from ribs.

Care & Maintenance

Clean canopy with mild soap and water; air dry completely before storage. Wipe pole with damp cloth. Store in dry place with protective cover during off-season.

CAUTION! Do not use bleach or abrasive cleaners. Do not store when wet to prevent mildew.

Warranty Information

1-year limited warranty covering defects in materials/workmanship. Proof of purchase required. Warranty does not cover damage from misuse, weather, or improper assembly. For claims, contact IKEA customer service with product number (004.453.51).

Troubleshooting

SymptomPossible CauseCorrective Action
Umbrella won't open fullyRib obstruction, pulley jamCheck ribs are aligned; free pulley rope; lubricate if needed.
Canopy sags or is unevenLoose ribs, uneven tensionTighten rib connections; adjust canopy fasteners evenly.
Umbrella tilts/shakes in windInsufficient base weightAdd more sand/water to base; relocate to sheltered area.
Tilt crank stiff/hard to turnLack of lubrication, debrisClean mechanism; apply silicone spray to moving parts.
Water pooling on canopyCanopy not tautOpen fully; adjust tension; push up from center to drain.

Service: For missing parts or defects, contact IKEA customer support or visit www.ikea.com.

IKEA HÖGÖN 004.453.51 Umbrella instructions manual © - All Rights Reserved 2025