IKEA GURSKEN 804.863.28 Nightstand instructions manual

The IKEA GURSKEN 804.863.28 is a modern nightstand featuring a clean design, durable construction, and practical storage. It includes a drawer for convenient bedside organization, is made from particleboard with a white finish, and requires assembly. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Product Specifications 5. Care & Maintenance 6. Troubleshooting 7. Warranty & Support

Parts & Hardware

All components included in the package. Check contents before starting assembly.

Part NameQuantityDescription
Nightstand Top1Main tabletop surface
Nightstand Sides2Left and right side panels
Nightstand Back Panel1Rear support panel
Drawer Front1Drawer face panel
Drawer Sides2Left and right drawer panels
Drawer Bottom1Base of the drawer
Cam Locks4For panel connections
Screws12Various sizes for assembly
Drawer Glides2Metal rails for smooth drawer operation
Allen Key1Tool for tightening screws

Safety Instructions

Read all instructions before assembly. Ensure a safe working environment.

  1. Assemble on a soft, clean surface to avoid scratches.
  2. Keep small parts away from children to prevent choking hazards.
  3. Use provided tools only; do not overtighten screws.
  4. Check all connections are secure before use.

WARNING! Furniture can tip over. Secure to wall if possible, especially in households with children. Do not place heavy objects on top that may cause instability.

Assembly Steps

Follow steps in order. Allow approximately 30 minutes for assembly.

  1. Prepare Workspace: Clear area and lay out all parts.
  2. Attach Sides to Top: Connect side panels to tabletop using cam locks and screws.
  3. Install Back Panel: Secure back panel to sides and top with provided screws.
  4. Assemble Drawer: Connect drawer sides to front and back, then attach bottom panel.
  5. Install Drawer Glides: Attach glides to inside of nightstand and sides of drawer.
  6. Insert Drawer: Slide drawer into place on glides.
  7. Final Check: Ensure all screws are tight and drawer opens smoothly.

Tip: Do not fully tighten screws until all parts are aligned. Refer to included pictorial guide for visual reference.

Product Specifications

Care & Maintenance

Proper care ensures longevity and appearance.

  1. Clean with a damp, soft cloth. Wipe dry immediately.
  2. Use mild soap if needed. Do not use abrasive cleaners, scouring pads, or solvents.
  3. Avoid placing in direct sunlight or near heat sources to prevent fading/warping.
  4. Do not place wet items directly on surface; use coasters.

CAUTION! Never soak or allow water to pool on surfaces. This may cause swelling or damage to the material.

Troubleshooting

IssuePossible CauseSolution
Drawer sticks or doesn't closeMisaligned glides or over-tightened screwsLoosen screws slightly, realign glides, and ensure drawer is square.
Wobbly or unstableUneven floor or loose connectionsTighten all cam locks and screws. Place on a level surface or use furniture pads.
Scratches on surfaceAssembly on hard surface or abrasive contactUse touch-up paint (available from IKEA) for minor scratches. Prevent further damage with a pad.
Missing partPart not included or lostContact IKEA customer service with article number for replacement parts.
Cam lock won't tightenCam post not engaged correctlyDisassemble step, ensure cam post is inserted fully into cam lock before turning.

Warranty & Support

IKEA limited warranty. See IKEA terms and conditions for details.

Warranty: 10-year limited warranty for structural integrity under normal use. Does not cover wear and tear, misuse, or commercial use.

Support: For missing parts, assembly help, or other inquiries:

Recycling: At end of life, disassemble and recycle materials according to local regulations.

IKEA GURSKEN 804.863.28 Nightstand instructions manual © - All Rights Reserved 2025