IKEA GRÖNÖ 704.249.82 Table Lamp instructions manual

The IKEA GRÖNÖ 704.249.82 is a modern table lamp designed for ambient lighting. It features a sturdy base, a fabric shade, an integrated on/off switch, and uses a standard E27 bulb (max 15W LED or equivalent). This manual provides essential information for safe assembly, installation, operation, maintenance, and troubleshooting.

1. Safety Information 2. Package Contents 3. Assembly Instructions 4. Installation & Setup 5. Operation 6. Care & Cleaning 7. Specifications 8. Troubleshooting 9. Warranty & Support

Safety Information

Read all safety instructions before assembly and use to prevent injury or damage.

WARNING: Disconnect from power before assembly, cleaning, or bulb replacement.
Use only with E27 base bulb. DO NOT EXCEED the maximum recommended wattage (15W LED or equivalent).
Place lamp on a stable, flat, and heat-resistant surface away from edges.
Keep away from children, water, other liquids, and heat sources.
Do not use if cord or plug is damaged. Contact IKEA support.
This lamp is for indoor use only.

Package Contents

Please verify all parts are present before starting assembly.

Part Description	Quantity	Image Ref.
Lamp Base (Metal/Composite)	1	A
Fabric Lamp Shade	1	B
Bulb Socket with integrated switch	1 (Pre-assembled in base)	C
Power Cord with plug	1	D
Assembly Hardware (if required)	1 set	E
Instruction Manual (this document)	1	-

Note: Light bulb is NOT included.

Assembly Instructions

Follow these steps carefully. Ensure the lamp is unplugged during assembly.

Prepare Workspace: Clear a flat, soft surface to prevent scratches.
Attach the Shade: Align the shade's frame with the socket holder on the base. Gently press and twist clockwise until it clicks or feels secure. Do not force.
Secure Connections (if applicable): If any screws are provided, use them to fasten the shade bracket to the base as shown in the diagram.
Route the Cord: Ensure the power cord is not pinched and exits cleanly from the base.

CAUTION! Do not overtighten. Handle the fabric shade carefully to avoid tearing.

Installation & Setup

Install Bulb: Screw an E27 base bulb (max 15W LED) into the socket. Do not touch a halogen bulb with bare hands.
Place the Lamp: Position the assembled lamp on a stable, level table or nightstand.
Connect to Power: Plug the power cord into a standard 120V AC wall outlet.
Final Check: Ensure the lamp does not wobble and the cord is not a tripping hazard.

Operation

The lamp features a simple integrated switch on the socket or cord.

To Turn On: Press or flip the switch to the "I" or ON position.
To Turn Off: Press or flip the switch to the "O" or OFF position.
Adjustment: The shade is fixed. For light direction, reposition the entire lamp.

Tip: For optimal ambiance and energy savings, use a warm white LED bulb.

Care & Cleaning

Always unplug the lamp and allow it to cool completely before cleaning.

Base & Socket: Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or chemicals.
Fabric Shade: Use a soft brush or the low-suction attachment of a vacuum cleaner to remove dust. Do not wash or immerse in water.
Cord: Wipe with a dry cloth.

WARNING! Never immerse any part of the lamp in water or other liquids.

Specifications

Product Name: GRÖNÖ Table Lamp
Article Number: 704.249.82
Bulb Socket: E27 (Standard)
Max. Wattage: 15W LED or equivalent (Do not use incandescent/halogen over recommended wattage)
Power Supply: 120V AC, 60Hz
Cord Length: Approximately 6 ft (1.8 m)
Materials: Base: Steel/Composite; Shade: Polyester fabric over metal frame.
Dimensions (HxW): Approx. 15" H x 9" W (38 cm x 23 cm)
Weight: Approx. 2.2 lbs (1 kg)

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in; Bulb burned out; Switch off	Ensure plug is secure in outlet. Replace bulb. Check switch position.
Lamp flickers	Loose bulb; Faulty bulb	Turn off, let cool, and tighten bulb. Try a different, known-working bulb.
Lamp gets very hot	Bulb wattage too high	Immediately turn off and unplug. Replace with a bulb of the correct max wattage (15W LED).
Shade is loose or crooked	Not fully secured during assembly	Unplug lamp. Check that the shade is properly twisted and locked onto the base.
Unusual smell or sound	Electrical fault; Foreign object	Unplug immediately. Do not use. Contact IKEA support.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included in the packaging or available at IKEA stores for full terms and conditions.

For Assembly Help, Parts, or Support:
Visit: www.ikea.com
Contact your local IKEA store.
Have the article number (704.249.82) and your receipt ready.

Recycling: At end of life, dispose of according to local electronic/lighting waste regulations. Do not dispose with household trash.