IKEA GRÅVACKA 094.901.84 Cord instructions manual

The IKEA GRÅVACKA 094.901.84 is a power cord designed for use with compatible IKEA electronic products. This manual provides essential information for safe installation, use, and maintenance of the cord. Below are key sections covering safety warnings, specifications, connection instructions, troubleshooting, and regulatory details.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Connections 6. Connecting to Devices 7. Safe Operation 8. Accessibility & Compatibility 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Mains power cord with plug, connector for appliance, insulated wiring, strain relief.

FeatureDescription
Plug TypeNorth American NEMA 5-15P (standard 3-prong)
Connector EndIEC C7 (figure-8) or as specified for appliance
Cable LengthApproximately 1.8 meters (6 feet)
Voltage Rating125V AC
Current Rating10A
Wire Gauge18 AWG
InsulationPVC, heat resistant
Safety StandardsUL listed, cULus
ColorBlack (standard)
PolarizationYes (where applicable)

Installation

Unpack and inspect cord for damage before use. Ensure compatibility with your IKEA appliance.

  1. Verify appliance is turned OFF and unplugged from any power source.
  2. Align connector with appliance's power input socket. Do not force.
  3. Push connector firmly into socket until it clicks or seats fully.
  4. Route cord safely to avoid pinching, sharp edges, or heat sources.
  5. Plug the other end into a grounded electrical outlet.

WARNING! Do not modify the cord or plug. Use only with compatible IKEA products. Ensure outlet voltage matches cord rating.

First-Time Setup

Power connection and verification.

  1. Confirm appliance power requirements match cord specifications (see label on appliance).
  2. Connect cord to appliance first, then to wall outlet.
  3. Switch on appliance using its power button/control.
  4. Check for secure connections and normal operation (e.g., power indicator lights).

CAUTION! Never plug in or unplug the cord with wet hands. Ensure cord is fully inserted at both ends.

Specifications

Controls and Connections

This cord has no user controls. Connection points are the plug (to outlet) and appliance connector (to device).

Plug Features: Three prongs (live, neutral, ground) for safe grounding. Polarized design ensures proper orientation where required.

Connector Features: IEC C7 figure-8 shape, two pins, often non-polarized. Designed for secure fit.

Visual Inspection: Regularly check for cracks, fraying, exposed wires, or loose connections.

Connecting to Devices

Compatible with IKEA products using IEC C7 input (e.g., certain lamps, audio equipment, small electronics).

  1. Ensure device power switch is OFF.
  2. Match connector shape and pin configuration to device socket.
  3. Insert connector straight in; do not twist or bend pins.
  4. Plug into a properly grounded 125V AC outlet.
  5. Turn device ON.

Tip: If cord does not fit, do not use force. Verify compatibility with appliance manual.

Safe Operation

Guidelines for daily use to prevent hazards.

  1. Do not overload: Ensure total current draw of appliance does not exceed 10A.
  2. Avoid damage: Do not run cord under carpets, furniture, or in high-traffic areas.
  3. Keep dry: Never use near water or in damp conditions unless appliance is rated for it.
  4. Prevent heat: Keep away from heaters, stoves, or other heat sources.
  5. Unplug properly: Pull by the plug, not the cord, when disconnecting.
  6. Child safety: Keep cord out of reach of children to prevent chewing or tripping.

WARNING! Discontinue use immediately if cord becomes hot, discolored, damaged, or emits odor. Replace with identical IKEA cord.

Accessibility & Compatibility

Universal design for easy handling. Compatible with standard North American outlets and IKEA appliances specifying IEC C7 input. Not compatible with devices requiring different voltage, plug type, or higher current.

Care & Cleaning

Unplug from outlet before cleaning. Wipe with dry cloth only. Do not use liquids, solvents, or abrasives.

CAUTION! Never immerse cord in water or cleaning solutions. Ensure cord is completely dry before use.

Regulatory Information

This product complies with applicable UL and CSA safety standards. The cord is marked with certification logos (UL, cULus). Manufactured for IKEA. Copyright and trademarks owned by Inter IKEA Systems B.V. For support, visit www.ikea.com or contact IKEA customer service at 1-800-434-4532.

Troubleshooting

SymptomPossible CauseCorrective Action
Appliance not powering onLoose connection, faulty outlet, cord damageCheck connections at both ends; try different outlet; inspect cord for damage.
Cord feels warm/hot during useOverloading, poor contact, damaged cordUnplug immediately. Ensure appliance current ≤10A. Replace cord if damaged.
Intermittent powerFrayed wire, loose connectorInspect entire length for damage. Ensure connector is fully seated.
Plug does not fit outletWrong plug type for regionUse only with 125V, 3-prong grounded North American outlets.
Connector does not fit applianceIncompatible socket typeVerify appliance requires IEC C7 input. Do not force connection.

Replacement: Use only identical IKEA GRÅVACKA 094.901.84 cord or manufacturer-approved equivalent.

Service: For defective cords, return to IKEA for replacement. Do not attempt repair.

IKEA GRÅVACKA 094.901.84 Cord instructions manual © - All Rights Reserved 2025