IKEA GRUNDBRO 204.895.27 Wall Lamp instructions manual

The IKEA GRUNDBRO 204.895.27 is a modern wall lamp designed for indoor use, featuring a sleek design with a white finish, adjustable arm, and integrated LED light source. It requires assembly and installation onto a wall, connecting to standard household electrical wiring. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using the Lamp 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable white metal arm, integrated LED module, wall mounting bracket, cable management system, on/off switch.

Feature	Description
Adjustable arm	Allows directional adjustment of light beam
Integrated LED	Energy-efficient, long-life light source
Wall mounting bracket	For secure attachment to wall
Cable management	Conceals wiring for clean appearance
On/off switch	Located on lamp body for easy control
White finish	Modern matte white surface
Mounting hardware	Included screws and wall plugs
Electrical cable	Pre-wired with plug for connection
Installation template	Paper guide for proper mounting
Instruction manual	This document for guidance

Installation

Unpack and inspect all parts. Ensure you have proper tools: screwdriver, drill, wall anchors (if not included).

Choose location: Select wall area near power outlet, away from moisture.
Use template: Tape included paper template to wall at desired height.
Mark holes: Mark drilling points through template holes.
Drill holes: Drill holes for wall plugs at marked points.
Mount bracket: Secure mounting bracket to wall using screws and wall plugs.
Attach lamp: Hang lamp onto bracket and secure with provided screws.
Adjust arm: Position arm to desired angle before final tightening.

WARNING! Turn off power at circuit breaker before installation. Lamp is heavy; ensure wall can support weight.

First-Time Setup

After installation, restore power and test operation.

Connect to power: Plug cable into nearby wall outlet.
Test switch: Turn lamp on using integrated switch.
Adjust direction: Position arm to direct light where needed.
Check stability: Ensure all screws are tight and lamp is secure.

CAUTION! Do not touch LED module when lamp is on; it may be hot. Keep away from flammable materials.

Specifications

Model: GRUNDBRO 204.895.27
Color: White
Light Source: Integrated LED, non-replaceable
Power Consumption: 7W
Lumen Output: 600 lumens
Color Temperature: 2700K (warm white)
Dimensions: Height 30cm, Width 15cm, Depth adjustable 10-30cm
Weight: 1.2 kg
Voltage: 120V AC, 60Hz (for North America)
Certifications: UL Listed, Energy Star compliant

Controls and Settings

Primary control: Integrated on/off switch on lamp body. No remote or dimmer included.

Adjustment: Arm can be positioned horizontally and vertically. Loosen adjustment knob, position arm, then tighten knob to lock in place.

Note: This model does not feature dimming capability or smart controls. For dimming, use with compatible external dimmer switch (check compatibility first).

Connecting to Power

Requires standard 120V AC outlet. Cable length: 1.5 meters.

Ensure power is off at circuit breaker before connecting.
Route cable neatly along wall or through cable management if available.
Plug into grounded wall outlet.
Restore power at circuit breaker.

Tip: Use cable clips to secure excess cable along wall for clean appearance.

Using the Lamp

Simple operation with integrated switch.

Turn on: Press switch to "I" position.
Turn off: Press switch to "O" position.
Adjust direction: Loosen adjustment knob, position arm, tighten knob.
For reading: Position arm to direct light onto reading material without glare.
For ambient lighting: Position arm upward to bounce light off ceiling.

WARNING! Do not exceed maximum adjustment range. Forcing arm beyond limits may damage mechanism.

Safety Features

Overheat protection: Built-in thermal protection shuts off lamp if overheating occurs. Auto-restart when cooled. Electrical safety: Double-insulated construction, no ground wire required.

Care & Cleaning

Turn off and unplug before cleaning. Use dry, soft cloth only. Do not use liquids, chemicals, or abrasive cleaners.

CAUTION! LED module is sensitive; avoid pressure when cleaning. Never immerse lamp in water.

Regulatory Information

UL Listed: Meets safety standards for the United States and Canada. Energy Star: Compliant with energy efficiency guidelines. FCC Part 15: Class B digital device; complies with interference limits. Copyright © IKEA of Sweden AB; all rights reserved. For support, visit www.ikea.com or contact 1-888-888-4532.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp doesn't turn on	Power/switch issue	Check outlet power; ensure switch is in "I" position; check circuit breaker.
Light flickers	Loose connection	Check plug connection; ensure all wiring in bracket is secure.
Arm won't stay in position	Loose adjustment knob	Tighten adjustment knob firmly.
Lamp gets very hot	Ventilation issue	Ensure lamp has air circulation; not covered by fabrics.
Light output decreases	LED end of life	LED lifespan approx. 25,000 hours; replace entire lamp if dim.

Warranty: 1-year limited warranty from date of purchase.

Service: 1-888-888-4532; www.ikea.com