IKEA GRIMSBU 205.085.16 Bed Frame instructions manual

The IKEA GRIMSBU 205.085.16 is a sturdy, minimalist bed frame designed for durability and ease of assembly. It features a slatted bed base for mattress support, a solid wood construction, and a clean Scandinavian design. Below are key sections for safety, parts identification, step-by-step assembly, care instructions, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Step-by-Step Assembly 4. Mattress & Bed Base Information 5. Care & Maintenance 6. Troubleshooting 7. Warranty & Support

Parts & Hardware

Before assembly, verify all parts are present. Key components include bed frame sides, headboard, footboard, center support beam, slats, and hardware pack.

Part Name	Quantity	Description
Side Rail (Long)	2	Main longitudinal frame pieces
Headboard	1	Upright panel for head of bed
Footboard	1	Lower panel for foot of bed
Center Support Beam	1	Reinforcing beam for middle of frame
Wooden Slats	14	Support slats for mattress base
Plastic Sleeves	4	For connecting side rails to head/footboards
Bolts (M8x70mm)	8	For securing frame joints
Washers	8	To distribute bolt pressure
Allen Key	1	Tool for tightening bolts

Safety Instructions

Read all instructions before assembly. Ensure a safe workspace.

Assemble on a soft, clean surface to avoid scratching parts.
Use two people for lifting and positioning frame components.
Tighten all bolts securely but do not overtighten.
Ensure the bed frame is on a level, stable floor before use.

WARNING! This furniture can tip over. Secure to wall if possible, especially in children's rooms. Do not allow children to climb on or play with the bed frame.

Step-by-Step Assembly

Estimated assembly time: 45-60 minutes. Tools needed: Supplied Allen key.

Prepare: Unpack all parts and lay them out. Identify all pieces using the parts list.
Attach Headboard & Footboard: Insert plastic sleeves into the ends of one side rail. Align with holes in the headboard and footboard. Insert bolts and hand-tighten.
Complete the Rectangle: Repeat step 2 with the second side rail to form the complete outer frame. Do not fully tighten bolts yet.
Install Center Support Beam: Position the center beam between the two side rails at the midpoint. Attach using provided brackets and screws. Ensure it is centered.
Final Tightening: Once the entire frame is square, use the Allen key to fully tighten all eight bolts connecting the side rails to the headboard and footboard.
Place Slats: Lay the wooden slats across the frame, resting on the side rails and center support beam. Ensure they are evenly spaced.
Final Check: Gently shake the frame to ensure it is rigid and does not wobble. Ensure all slats are securely in place.

CAUTION! Do not skip the center support beam. It is critical for preventing the frame from sagging.

Mattress & Bed Base Information

Compatible Mattress Size: Full/Double (54" x 75" / 137cm x 191cm).
Bed Base Type: Slatted bed base (Luroy type). Provides firm support and allows mattress ventilation.
Weight Capacity: Designed for a maximum distributed weight of 600 lbs (272 kg), including mattress and occupants.
Mattress Placement: After assembly, center your mattress on the slatted base. Ensure no part of the mattress overhangs unsupported.

Care & Maintenance

To ensure longevity of your GRIMSBU bed frame.

Cleaning: Wipe with a damp cloth and mild soap. Dry immediately. Do not use abrasive cleaners or solvents.
Wood Care: The solid wood may expand/contract with humidity. Avoid placing in direct sunlight or near heat sources.
Periodic Check: Every 3-6 months, check and re-tighten all bolts and connections to maintain stability.
Slats: If a slat cracks or breaks, contact IKEA for a replacement part. Do not use the bed with broken slats.

Tip: Rotate your mattress regularly for even wear, which also reduces uneven pressure on the bed frame.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bed frame wobbles or squeaks	Loose bolts or uneven floor	Tighten all connection bolts. Place shims under frame legs if floor is uneven.
Slats falling through	Slats not properly seated on center beam	Ensure all slats are resting evenly on the side rails AND the center support beam.
Mattress sags in middle	Center support beam not installed or slats broken	Verify center beam is correctly installed. Inspect slats for damage and replace if necessary.
Difficulty aligning holes	Frame not square	Loosen all bolts slightly, square the frame by adjusting corners, then re-tighten.
Headboard/footboard feels loose	Plastic sleeves not fully inserted or bolts loose	Push plastic sleeves firmly into side rail ends. Ensure bolts are threaded correctly and tightened.

Warranty & Support

The IKEA GRIMSBU bed frame is covered by IKEA's limited warranty. Refer to the IKEA warranty booklet included with your purchase or available at IKEA stores for full terms and duration.

Replacement Parts: For missing or damaged parts, contact IKEA Customer Service with your article number (205.085.16).

Support: For assembly help or other inquiries, visit the IKEA website (www.ikea.com) or contact your local IKEA store.

Safety Notice: Always follow the assembly instructions. Incorrect assembly can void the warranty and create a safety hazard.