IKEA GRIMSÅS 404.128.34 Lighting instructions manual

The IKEA GRIMSÅS 404.128.34 is a modern lighting solution designed for easy assembly and energy-efficient operation. This manual provides essential information for safe unpacking, assembly, installation, operation, maintenance, and troubleshooting of your GRIMSÅS light fixture. Please read all instructions carefully before beginning.

1. Safety Information 2. Package Contents & Tools Required 3. Assembly Instructions 4. Installation & Mounting 5. Operation 6. Bulb Replacement 7. Care & Cleaning 8. Specifications 9. Troubleshooting 10. Warranty & Support

Safety Information

Important warnings and precautions to ensure safe handling and use.

Warning	Description
Electrical Safety	Always turn off power at the circuit breaker before installation or maintenance.
Weight Limit	Ensure ceiling/wall can support the fixture's weight. Use appropriate anchors.
Bulb Compatibility	Use only LED bulbs with max wattage and base type as specified in this manual.
Heat	Do not cover the fixture or place near flammable materials. Allow bulbs to cool before touching.
Children	Keep packaging materials away from children. Assembly should be performed by an adult.
Water & Moisture	This is not a bathroom or outdoor light unless specifically rated (IP44 or higher).

Package Contents & Tools Required

Unpack all parts and check against this list before assembly.

Main fixture body/shade (GRIMSÅS)
Mounting bracket
Wire connectors (2-3 pcs)
Screws and wall plugs
Instruction manual (this document)

Tools you will need: Screwdriver (Phillips), ladder/step stool, wire strippers (optional), voltage tester.

NOTE: If any part is missing or damaged, do not proceed. Contact IKEA customer service.

Assembly Instructions

Follow these steps to assemble the light fixture before mounting.

Lay all parts on a clean, soft surface to avoid scratches.
If applicable, attach the suspension cord/chain to the canopy using the provided locking mechanism.
Connect the fixture's wires to the terminal block or leads, if pre-assembly is required.
Secure the shade or diffuser to the main body. It may click or screw into place.
Do not fully tighten all screws until the fixture is aligned during installation.

CAUTION! Handle glass or plastic shades with care to avoid breakage.

Installation & Mounting

Installing the fixture to your ceiling or wall.

Turn OFF Power: Switch off electricity at the main fuse box/circuit breaker.
Mount Bracket: Attach the mounting bracket to the electrical box in the ceiling/wall using the provided screws.
Connect Wires: Connect the fixture's wires to your household wires: Live (brown/black) to Live, Neutral (blue/white) to Neutral, Earth (green/yellow) to Earth (if present). Use wire connectors and secure them.
Attach Fixture: Lift the fixture and align it with the bracket. Secure it with the provided screws or by twisting onto the bracket.
Final Check: Ensure all connections are tight and no wires are pinched. Install the bulb(s).
Restore Power: Turn the power back on and test the light with the wall switch.

WARNING! If you are unsure about electrical work, consult a qualified electrician.

Operation

Your GRIMSÅS light is operated via your existing wall switch. For models with a pull chain or dimmer:

On/Off: Use the wall switch or pull chain (if equipped).
Dimmer Compatibility: Compatible with leading-edge (TRIAC) dimmers only if using dimmable LED bulbs. Check bulb packaging.
First Use: The light should turn on immediately. If it flickers, check connections and bulb seating.

Bulb Replacement

Always turn off power and let the bulb cool before replacement.

Ensure the light is OFF and cool to the touch.
Depending on the shade, you may need to gently remove it by unscrewing or unclipping.
Unscrew the old bulb counterclockwise.
Screw in a new bulb of the correct type (see Specifications) clockwise until snug. Do not overtighten.
Replace the shade and restore power.

Recommended Bulb: E27 base, Max 13W LED (equivalent to 100W incandescent), 2700K for warm white light.

Care & Cleaning

Unplug/turn off power at the breaker before cleaning.

Use a dry, soft microfiber cloth to dust the fixture regularly.
For plastic or glass shades, a slightly damp cloth can be used. Dry immediately.
Do not use abrasive cleaners, chemicals, or scouring pads.
Never immerse the fixture or any electrical parts in water.

CAUTION! Do not clean while the light is on or hot.

Specifications

Article Number: 404.128.34
Product Name: GRIMSÅS
Type: Ceiling/Wall Light Fixture
Max Wattage: 13W LED (1 x E27)
Voltage: 220-240V AC, 50/60Hz
Dimensions: Height: XX cm, Width: XX cm, Depth: XX cm
Material: Steel/Plastic/Glass (as per product description)
Color: White/Black (as per variant)
Weight: Approx. X.X kg
Dimmable: Yes, with compatible dimmable LED bulb and dimmer switch.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	Power off; faulty bulb; loose connection	Check circuit breaker; try a known-working bulb; ensure all wires are connected securely.
Light flickers	Loose bulb; incompatible dimmer; faulty connection	Tighten bulb; ensure dimmer and bulb are compatible; check wire connections in ceiling.
Buzzing sound	Incompatible dimmer; transformer issue (if low voltage)	Use a compatible LED dimmer; ensure correct driver/transformer is used.
Fixture is loose	Mounting screws not tight; bracket not secure	Turn off power and tighten all mounting screws. Ensure bracket is fixed to a solid support.
Overheating	Bulb wattage too high; enclosed fixture with non-enclosed rated bulb	Use only recommended max wattage LED bulbs. Ensure bulbs are rated for enclosed fixtures if applicable.

Warranty & Support

This IKEA product is guaranteed under the terms of the IKEA commercial warranty. Please refer to the IKEA warranty leaflet included in the packaging or available at IKEA stores for full details.

IKEA Customer Support:
Website: www.ikea.com
Phone: Contact your local IKEA store
Always have the article number (404.128.34) and receipt ready when contacting support.

Recycling: At end of life, dispose of this product and any electronic components according to local regulations. Do not dispose of with household waste.