IKEA GRILLSKÄR 704.896.62 Sink Unit instructions manual

The IKEA GRILLSKÄR 704.896.62 is a stainless steel sink unit designed for outdoor kitchen use, featuring a durable 18/10 stainless steel construction, integrated drainage system, compatibility with standard 60cm base cabinets, and a sleek, easy-to-clean surface. Below are key sections for safety, features, assembly, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Stainless steel sink bowl, Drainage outlet with plug, Mounting brackets, Installation hardware.

Package Contents

Unpack and verify all parts before assembly.

1. Stainless steel sink unit (1 piece)
2. Mounting brackets (set of 4)
3. Mounting screws (8 pieces)
4. Drain plug assembly (1 set)
5. Instruction manual (this document)
6. Warning labels (as applicable)

IMPORTANT! Check for shipping damage before assembly. Contact IKEA if any parts are missing or damaged.

Safety Information

Read all instructions before assembly and installation.

1. Use proper lifting techniques: Sink is heavy; lift with care.
2. Installation surface: Must be level, stable, and capable of supporting weight.
3. Sharp edges: Handle with care during assembly.
4. Tools required: Phillips screwdriver, adjustable wrench, silicone sealant (not included).
5. Water connection: Ensure proper sealing to prevent leaks.

WARNING! Do not stand or sit on the sink. Ensure cabinet structure is sound before installation.

Assembly Instructions

Assemble mounting brackets before installation.

1. Attach brackets: Position mounting brackets on underside of sink rim using provided screws.
2. Tighten securely: Use Phillips screwdriver to fasten brackets, but do not overtighten.
3. Check alignment: Ensure brackets are evenly spaced and level.
4. Prepare drain: Insert drain plug assembly into drainage outlet.

CAUTION! Work on a soft, protected surface to avoid scratching the stainless steel.

Installation Guide

Install in prepared 60cm base cabinet.

1. Prepare cabinet: Ensure cutout dimensions match sink template (included separately).
2. Apply sealant: Run bead of silicone sealant along underside of sink rim.
3. Position sink: Carefully lower sink into cabinet cutout.
4. Secure brackets: From inside cabinet, tighten brackets against cabinet frame.
5. Wipe excess: Remove excess sealant with damp cloth before it dries.
6. Cure time: Allow sealant to cure as per manufacturer instructions before use.

Tip: Have a second person assist with positioning the sink.

Connecting to Drainage

Connect to standard waste pipe system.

1. Attach waste pipe: Connect standard 1½-inch waste pipe to sink drain outlet.
2. Use seal: Apply plumber's tape or sealant to threads for watertight connection.
3. Check for leaks: Run water briefly and inspect connections underneath.
4. Install trap: Ensure P-trap is installed to prevent odors.

Note: Local plumbing codes may vary; consult professional if unsure.

Using the Sink Unit

Designed for washing utensils, food preparation, and general cleaning.

1. Normal use: For washing dishes, rinsing vegetables, and general kitchen tasks.
2. Drain plug: Insert to fill sink; remove to drain.
3. Avoid extremes: Do not pour boiling water directly onto stainless steel; sudden temperature changes may cause warping.
4. Weight limits: Do not place excessive weight (e.g., large pots) on one area of sink.
5. Cutting: Use cutting boards; avoid cutting directly on sink surface.

WARNING! Do not use abrasive cleaners or steel wool that can scratch surface.

Care & Cleaning

Regular cleaning maintains appearance and longevity.

• Daily cleaning: Use mild dish soap, warm water, and soft cloth.
• Stain removal: For water spots or light stains, use vinegar solution or specialized stainless steel cleaner.
• Rinse thoroughly: After cleaning, rinse with clean water to prevent soap residue.
• Dry: Wipe with dry cloth to prevent water spots.
• Avoid: Harsh chemicals, bleach, abrasive pads, or scouring powders.

CAUTION! Never use chlorine-based cleaners as they can damage stainless steel.

Technical Specifications

• Product Name: GRILLSKÄR Sink Unit
• Article Number: 704.896.62
• Material: 18/10 Stainless Steel
• Dimensions (WxDxH): Approximately 60cm x 50cm x 20cm (sink bowl)
• Cutout Dimensions: Refer to separate template
• Weight: Approximately 8.5 kg
• Drain Size: Standard 1½-inch outlet
• Installation Type: Top-mount (drop-in)
• Color/Finish: Brushed stainless steel
• Warranty: Refer to IKEA warranty terms

Warranty Information

IKEA limited warranty applies. For details, visit www.ikea.com or contact local IKEA store.

Registration: Register your product online for extended service.

Support: For assembly or installation questions, contact IKEA customer service.

Troubleshooting

Professional Help: For plumbing issues beyond basic troubleshooting, consult licensed plumber.

IKEA Contact: Visit www.ikea.com or call local IKEA store for assistance.