IKEA GRILLSKÄR 104.714.48 Side Unit instructions manual

The IKEA GRILLSKÄR 104.714.48 is a side unit designed for use with the GRILLSKÄR outdoor kitchen series. It provides additional storage and work surface space, constructed from powder-coated steel and solid wood for durability in outdoor conditions. Below are key sections for safety, assembly, installation, use, care, and warranty information.

1. Safety Instructions 2. Package Contents & Tools Required 3. Assembly Instructions 4. Installation & Placement 5. Specifications 6. Using the Side Unit 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Safety Instructions

Important safety warnings to prevent injury and damage.

Warning	Description
Weight Capacity	Do not exceed maximum load of 25 kg on the work surface.
Stability	Ensure unit is placed on level, solid ground before use.
Assembly	Use two people for assembly; keep children away from small parts.
Outdoor Use	Designed for covered outdoor use only. Do not expose to prolonged heavy rain.
Heat	Keep away from direct open flames or extreme heat sources.
Cleaning	Unload unit before moving or cleaning.

Package Contents & Tools Required

Check all parts before starting assembly.

Side Unit Frame: Powder-coated steel panels (x4)
Work Surface: Solid wood slats, pre-treated
Shelving: Perforated steel shelf (x1)
Hardware Bag: Contains screws, bolts, wall anchors, and assembly tool
Instruction Manual: This document

Tools you need: Phillips screwdriver, rubber mallet (optional), level.

WARNING! Do not discard packaging until assembly is complete and verified.

Assembly Instructions

Follow steps in order. Estimated assembly time: 45-60 minutes.

Prepare Area: Lay all parts on a clean, soft surface to prevent scratches.
Attach Side Panels: Connect the left and right side panels to the back panel using provided screws (8x). Do not fully tighten yet.
Install Shelf: Insert the perforated steel shelf at the desired height (two height options). Secure with shelf pins.
Attach Front Panel: Connect the front panel to complete the frame. Tighten all frame screws securely.
Mount Work Surface: Place the wooden work surface on top of the frame. Secure from underneath using the corner brackets and screws (4x).
Final Check: Ensure all screws are tight. Check stability by gently rocking the unit.

CAUTION! Overtightening screws may strip threads. Assemble on a flat surface.

Installation & Placement

Location: Choose a level, stable area under a covered patio, pergola, or similar.
Spacing: Allow at least 10 cm clearance from walls for ventilation.
Anchoring (optional): For high-wind areas, use provided wall anchors to secure the back of the unit to a solid wall.
Companion Units: Can be placed next to other GRILLSKÄR modules. Ensure surfaces are level with each other.

Tip: Use a spirit level during placement to ensure the work surface is horizontal.

Specifications

Article Number: 104.714.48
Dimensions (W x D x H): 60 cm x 47 cm x 89 cm
Work Surface Height: 89 cm
Material Frame: Powder-coated steel, Stainless steel
Material Work Surface: Solid acacia wood, Pre-treated with protective oil
Shelf Material: Perforated, coated steel
Max Load Work Surface: 25 kg
Max Load Shelf: 15 kg
Weight (net): 12.5 kg
Color: Black/Brown

Using the Side Unit

Intended for storage of grilling utensils, plates, condiments, and as a food prep station.

Loading Shelf: Distribute weight evenly. Place heavier items at the back of the shelf.
Work Surface: Use for food preparation. Wipe spills immediately.
Do Not: Use as a step ladder, seat, or place hot pots directly from the grill onto the wood surface without a trivet.

WARNING! The wood surface is not heatproof. Always use a heat-resistant pad or trivet for hot items.

Care & Maintenance

Proper care extends product life.

Steel Frame: Wipe with a damp cloth and mild soap. Dry thoroughly. Do not use abrasive cleaners.
Wooden Surface: Clean with a damp cloth. Reapply protective oil (IKEA SKYDD) 1-2 times per year or when wood appears dry.
Seasonal Storage: If storing indoors for winter, ensure unit is clean and completely dry. Store in a cool, dry place.
Rust Spots: Treat minor rust spots on steel immediately with a rust remover and touch-up paint.

CAUTION! Never use a pressure washer, steel wool, or harsh chemicals.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit wobbles	Uneven ground or loose screws	Place on level surface. Check and tighten all frame connection screws.
Wood surface cracking	Lack of protective oil or extreme weather	Sand lightly and apply protective oil. Consider moving to a more covered location.
Rust appearing	Scratched coating or prolonged moisture	Clean area, sand lightly, and apply touch-up paint for outdoor metal.
Shelf sags	Weight limit exceeded	Remove excess weight. Do not exceed 15 kg on the shelf.
Screws won't tighten	Threads stripped or misaligned parts	Disassemble step and ensure parts are aligned correctly. Do not force.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or at IKEA stores.

Spare Parts: For missing or damaged parts, contact IKEA customer service with the article number (104.714.48).

Support: Visit www.ikea.com for assembly videos, more guides, or to contact customer service.

Recycling: At end of life, disassemble and recycle materials according to local regulations.