IKEA GRANHULT 004.305.33 Connecting Bracket instructions manual

The IKEA GRANHULT 004.305.33 Connecting Bracket is a hardware component designed for securely joining and stabilizing furniture parts, typically used in IKEA table or desk systems. It ensures structural integrity and proper alignment during assembly. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing DVD Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Metal bracket, mounting holes, screws (if included), alignment guides.

Feature	Description
Material	Steel or metal alloy for durability
Mounting Holes	Pre-drilled holes for secure screw attachment
Alignment Guides	Ensures precise positioning during assembly
Finish	Powder-coated or plated to resist corrosion
Compatibility	Designed for IKEA GRANHULT series furniture
Weight Capacity	Supports standard tabletop loads
Installation Tools	Requires screwdriver or Allen key (as specified)
Package Contents	Bracket, screws, installation manual
Safety Features	Rounded edges to prevent injury
Warranty	IKEA limited warranty as per regional terms

Installation

Unpack and inspect contents. Ensure all parts are present.

Identify mounting points: Align bracket with pre-drilled holes on furniture parts.
Secure bracket: Use provided screws to attach bracket to both connecting pieces.
Tighten screws: Ensure all screws are firmly tightened but avoid over-tightening.
Verify alignment: Check that connected parts are level and stable.

WARNING! Use correct tools; avoid stripping screws. Ensure furniture is on a stable surface during assembly.

First-Time Setup

Follow assembly instructions step by step.

Prepare workspace: Clear area and lay out all parts.
Test fit: Position bracket without screws to confirm alignment.
Install screws: Hand-tighten initially, then fully tighten with tool.
Final check: Ensure no wobble and all connections are secure.

CAUTION! Do not exceed weight limits; use two people for large furniture pieces.

Specifications

Model: GRANHULT 004.305.33
Material: Steel with protective coating
Dimensions: As per IKEA product specifications
Weight Capacity: Designed for standard table loads
Color/Finish: Typically black or metallic
Tools Required: Screwdriver or Allen key (size as specified)
Package Weight: Lightweight for easy handling
Compliance: Meets relevant furniture safety standards

Controls and Settings

No electronic controls; manual installation only.

Adjustment: Ensure screws are evenly tightened for balanced support.

Installation: Follow hole alignment; use correct screw length. Safety: Check stability periodically. Maintenance: Inspect for loose screws over time.

Connecting Devices

Not applicable for electronic devices; hardware connection only.

Ensure furniture parts are clean and free of debris.
Align bracket with mounting points on both pieces.
Insert and tighten screws in a cross pattern for even pressure.

Tip: Use a level to ensure connected parts are even.

Playing DVD Media

Not applicable; this is a hardware bracket.

This section does not apply to the IKEA GRANHULT Connecting Bracket.
Refer to IKEA assembly instructions for hardware installation steps.

WARNING! Do not use this bracket for purposes other than intended furniture assembly.

Accessibility Features

Not applicable; physical hardware with no electronic accessibility features.

Care & Cleaning

Wipe with dry cloth; avoid abrasive cleaners or moisture.

CAUTION! Do not use chemical cleaners; keep away from excessive humidity.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bracket does not align	Incorrect positioning	Re-check hole alignment; ensure furniture parts are oriented correctly.
Screws not tightening	Stripped threads or wrong screw size	Use correct screws; do not force if threads are damaged.
Wobble after installation	Loose screws or uneven surface	Tighten all screws; ensure furniture is on level ground.
Bracket visible after assembly	Designed for internal mounting	Confirm bracket is installed in correct location per instructions.
Parts not connecting securely	Missing screws or incorrect bracket	Verify all parts are present; use only IKEA-provided components.

Reset: Disassemble and reassemble if necessary.

Service: Contact IKEA customer service; www.ikea.com