IKEA GRÖNPLYM 405.071.01 Wall Lamp instructions manual

The IKEA GRÖNPLYM 405.071.01 is a modern wall lamp designed for indoor use, featuring a sleek design with a metal shade and a built-in E14 socket. It requires assembly and installation onto a wall, using the included mounting hardware. The lamp is intended for use with a maximum 7W LED bulb (not included). Below are key sections for safety, parts included, assembly, installation, operation, care, and warranty information.

1. Safety Instructions 2. Parts Included 3. Tools Required 4. Assembly Instructions 5. Wall Installation 6. Electrical Connection 7. Using the Lamp 8. Care & Maintenance 9. Troubleshooting 10. Specifications & Warranty

Safety Instructions

Read all instructions before assembly and installation. Failure to follow safety warnings may result in electric shock, fire, or injury.

Warning	Description
Electrical Safety	Always turn off power at the circuit breaker before installation. Ensure wiring is correct.
Bulb Wattage	Use only LED bulbs with a maximum of 7W (E14 base). Higher wattage may cause overheating.
Installation Surface	Mount only on dry, indoor walls. Do not install in damp locations (bathrooms) unless rated.
Children	Keep small parts away from children during assembly to avoid choking hazard.
Lamp Stability	Ensure the lamp is securely mounted to the wall to prevent falling.

Parts Included

Check that all parts are present before starting assembly.

Wall lamp shade (metal)
Mounting bracket
E14 socket assembly with wires
Wall screws (2 pcs)
Plastic wall plugs (2 pcs)
Instruction manual

NOTE: Light bulb is not included. Purchase a suitable 7W LED E14 bulb separately.

Tools Required

You will need the following tools for installation:

Screwdriver: Phillips head for screws.
Drill: For making holes in the wall (if not using existing wiring box).
Wall anchor tool: If mounting on drywall without a stud.
Wire strippers: For preparing electrical wires.
Voltage tester: To ensure power is off.

CAUTION! Use appropriate personal protective equipment when drilling.

Assembly Instructions

Assemble the lamp before mounting it to the wall.

Attach the E14 socket to the lamp shade: Align the socket base with the opening on the shade and secure with the provided nut.
Connect wires: If wires are not pre-connected, attach the socket wires to the lamp's internal terminals (usually screw terminals). Follow color coding (brown/live, blue/neutral).
Secure the mounting bracket to the back of the lamp shade using the screws provided.
Ensure all connections are tight and no wires are pinched.

WARNING! Do not plug in or turn on power during assembly.

Wall Installation

Mount the lamp on a sturdy wall section.

Turn off power at the circuit breaker.
Mark drilling points: Hold the mounting bracket against the wall at desired height. Use a level to ensure it is straight. Mark holes.
Drill holes: Use a drill bit suitable for your wall type (e.g., 6mm for plugs). Insert plastic wall plugs.
Attach bracket: Secure the mounting bracket to the wall using the provided screws.
Hang lamp: Place the assembled lamp onto the mounted bracket and secure it according to the design (may involve a locking screw).

Tip: For plasterboard walls, use appropriate anchors to support the lamp's weight.

Electrical Connection

Connect the lamp to your home's electrical wiring. If unsure, consult a qualified electrician.

Ensure power is OFF at the breaker.
Remove the existing wall fixture (if replacing) or prepare the wiring outlet.
Connect wires: Match lamp wires to house wires: live (brown) to live (usually black/red), neutral (blue) to neutral (usually white/blue), and ground (green/yellow) to ground if present.
Use wire connectors to secure connections and tuck wires neatly into the wall box.
Attach the lamp to the mounting bracket and secure.
Install the LED bulb (max 7W, E14 base).

WARNING! Incorrect wiring can cause electric shock or fire. Double-check connections.

Using the Lamp

Once installed, the lamp is ready for use.

Turn power back on at the circuit breaker.
Operate the lamp using your wall switch or the switch on the lamp (if equipped).
For optimal performance and energy savings, use the recommended 7W LED bulb.
The lamp provides directional lighting; adjust the shade angle if designed to be adjustable.

NOTE: The lamp may become warm during use. This is normal. Avoid touching the bulb or metal shade immediately after turning off.

Care & Maintenance

To keep your lamp in good condition:

Always turn off and unplug (if applicable) before cleaning.
Use a soft, dry cloth to wipe the shade and body. Do not use abrasive cleaners or liquids.
Replace the bulb only when the lamp is cool to the touch.
Periodically check that mounting screws are tight.

CAUTION! Never immerse the lamp in water or use wet cloths on electrical parts.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power off / Bulb faulty	Check circuit breaker; ensure wall switch is on; try a new bulb.
Lamp flickers	Loose connection / Bulb type	Turn off power and check wire connections; ensure bulb is properly seated and is LED.
Lamp feels hot	High wattage bulb	Replace with correct 7W max LED bulb. Ensure adequate ventilation.
Lamp is loose on wall	Mounting screws loose	Turn off power. Tighten mounting screws. Ensure wall anchors are secure.
No light from new bulb	Bulb not compatible	Verify bulb is E14 base and functional. Some LEDs are directional—ensure it's oriented correctly.

Reset: For electrical issues, turn power off for 30 seconds, then back on.

Specifications & Warranty

Product Name: IKEA GRÖNPLYM 405.071.01 Wall Lamp
Socket Type: E14
Max Bulb Wattage: 7W LED (equivalent to 40W incandescent)
Voltage: 120V AC, 60Hz (for North America)
Material: Metal shade, plastic/ceramic socket
Dimensions: Approx. 15cm (H) x 12cm (W) x 18cm (D)
Weight: 0.5 kg
Warranty: IKEA limited warranty. Refer to IKEA warranty terms for details. Keep receipt.
Support: For assistance, visit www.ikea.com or contact your local IKEA store.

Disposal: Dispose of according to local regulations for electronic waste. Do not dispose of with household trash.