IKEA GRÖNBY 605.280.65 Picture Set instructions manual

The IKEA GRÖNBY 605.280.65 is a picture set designed for easy wall mounting and aesthetic display. This set includes multiple frames of varying sizes, mounting hardware, and a template for precise placement. Below are key sections for safety, contents, installation, assembly, care, and troubleshooting.

1. Package Contents 2. Safety Information 3. Tools Required 4. Wall Preparation 5. Assembly Instructions 6. Mounting Template Guide 7. Hanging the Frames 8. Picture Insertion & Adjustment 9. Care & Maintenance 10. Troubleshooting 11. Warranty & Support

Package Contents

Before starting, verify all parts are present. Key components: Picture frames (various sizes), Mounting hardware (screws, wall plugs), Hanging hooks, Spacer elements, Mounting template, Instruction manual.

ItemQuantityDescription
Small Frame210x15 cm with glass/acrylic front
Medium Frame220x25 cm with glass/acrylic front
Large Frame130x40 cm with glass/acrylic front
Mounting Screws5For wall attachment
Wall Plugs5For drywall or solid walls
Hanging Hooks5Attach to frame back
Spacer Elements10For even spacing between frames
Mounting Template1Paper guide for wall marking
Instruction Manual1This document

Safety Information

Read all instructions before assembly and mounting.

  1. Use appropriate wall anchors for your wall type (drywall, plaster, concrete).
  2. Ensure wall can support the total weight of the picture set.
  3. Keep small parts away from children to avoid choking hazard.
  4. Wear safety glasses when drilling into walls.
  5. Check for electrical wires or pipes before drilling.

WARNING! Frames contain glass/acrylic; handle with care to avoid breakage and injury. Do not hang above beds or seating areas without secure mounting.

Tools Required

Tools not included; gather before starting.

Wall Preparation

Choose a suitable wall and prepare the area.

  1. Decide on layout: Use template or plan desired arrangement on floor first.
  2. Clean wall surface: Ensure it is dry and free of dust.
  3. Locate studs: Use stud finder for optimal support, especially for larger frames.
  4. Protect floor: Place drop cloth below work area to catch dust.

Tip: Consider lighting and room decor when choosing placement to avoid glare on glass.

Assembly Instructions

Assemble frames before hanging.

  1. Remove back panel: Lay frame face down on soft surface, release back clips.
  2. Insert picture: Place photo or artwork against glass/acrylic, ensuring it is centered.
  3. Replace back panel: Secure clips firmly around all edges.
  4. Attach hanging hooks: Fix hooks to back of frame at marked positions using provided screws (if not pre-attached).
  5. Attach spacer elements: If using between frames for gallery look, attach to frame sides as desired.

CAUTION! Avoid overtightening screws on frame back to prevent damage.

Mounting Template Guide

Use the paper template for accurate hole placement.

  1. Tape template to wall: Use painter's tape at desired height, ensuring it is level.
  2. Mark holes: Through template dots, mark wall with pencil.
  3. Remove template: Check marks are clear and correctly spaced.
  4. Drill holes: Use drill bit slightly smaller than wall plugs, drill at marks to required depth.
  5. Insert wall plugs: Tap gently with hammer until flush with wall.

Note: Template is designed for recommended layout; adjust if custom arrangement is preferred.

Hanging the Frames

Mount frames securely to wall.

  1. Start with largest frame: Align hanging hook with wall screw, place over screw head.
  2. Secure screw: Partially screw into wall plug, leave enough protruding to hook frame.
  3. Hang frame: Place frame on screw, ensure it is level using level tool.
  4. Tighten screw: Once level, fully tighten screw to secure frame (do not overtighten).
  5. Repeat for remaining frames: Follow template order, using spacer elements for consistent gaps.
  6. Final check: Step back and verify all frames are level and evenly spaced.

WARNING! Do not hang if screw feels loose; use larger wall anchor or different location.

Picture Insertion & Adjustment

How to change pictures and adjust frames.

Care & Maintenance

To maintain appearance and safety.

  1. Dust regularly with soft, dry cloth.
  2. Avoid hanging in direct sunlight to prevent fading.
  3. Do not use water or liquid cleaners on frames.
  4. Check mounting screws annually for tightness.
  5. If moving, remove pictures and pack frames separately.

CAUTION! Glass can break if struck; handle with care during cleaning or picture changes.

Troubleshooting

IssuePossible CauseSolution
Frame not levelUneven wall or incorrect hangingAdjust screw position; use level during hanging.
Screw feels looseWall plug too small or damagedReplace with larger wall anchor suitable for wall type.
Glass/acrylic crackedImpact or overtighteningReplace frame; contact IKEA for replacement part.
Template marks misalignedTemplate not level when tapedRe-tape template using level before marking.
Back panel won't closePicture too large or warpedTrim picture to correct size or use thinner paper.
Spacer elements not fittingIncorrect attachment sideAttach to frame side, not front/back; ensure compatible frame sizes.

Warranty & Support

IKEA limited warranty applies. For assistance:

Note: Warranty does not cover damage from improper installation, accidents, or modifications.

IKEA GRÖNBY 605.280.65 Picture Set instructions manual © - All Rights Reserved 2025