IKEA GOODMORGON 994.900.85 Sink Cabinet instructions manual

The IKEA GOODMORGON 994.900.85 is a sink cabinet designed for bathroom installation, featuring a ceramic sink, storage cabinet, and water-resistant construction. This manual provides essential information for safe assembly, installation, use, and maintenance of your sink cabinet. Below are key sections covering safety, parts identification, step-by-step assembly, installation, care, and troubleshooting.

Parts and Components

Key components included in the package: Ceramic sink basin, Cabinet frame, Door panel, Drawer front, Hinges, Handles, Mounting brackets, Screws and fittings, Drain assembly, Water supply connectors.

Safety Information

Read all instructions before assembly and installation.

1. Assembly: Requires two people. Work on a clean, flat surface.
2. Installation: Ensure wall is solid and can support the cabinet weight (use wall plugs suitable for your wall type).
3. Plumbing: Turn off water supply before connecting. Check for leaks after installation.
4. Electrical: Keep away from electrical outlets and appliances to avoid water damage.

WARNING! Cabinet is heavy; lift with care to avoid injury. Ensure all connections are secure before use.

Tools Required

Tools not included that you will need:

1. Phillips screwdriver
2. Adjustable wrench
3. Spirit level
4. Pencil for marking
5. Electric drill with appropriate drill bits
6. Tape measure
7. Safety glasses

CAUTION! Use correct tools to avoid damaging parts or injury.

Assembly Instructions

Follow steps in order. Do not fully tighten screws until all parts are aligned.

1. Unpack all parts and check against parts list.
2. Assemble cabinet frame: Connect side panels to bottom panel using provided screws.
3. Attach back panel: Secure to frame with screws.
4. Install drawer runners: Attach to inner sides of cabinet.
5. Assemble drawer: Connect sides to front and back, then attach bottom panel.
6. Attach door hinges: Mount to door panel first, then attach to cabinet frame.
7. Install handles: Attach to door and drawer front using screws from inside.
8. Place sink basin: Carefully position ceramic sink into cutout on top of cabinet.
9. Secure sink: Apply sealant (not included) around edges if recommended.

Tip: Keep screws organized. Do not overtighten to avoid stripping.

Installation to Wall

Cabinet must be securely fixed to wall studs or solid masonry.

1. Mark wall: Use spirit level to mark positions for mounting brackets at desired height.
2. Drill holes: Drill holes at marked positions using appropriate drill bit for your wall.
3. Insert wall plugs: Hammer plugs into drilled holes.
4. Mount brackets: Screw mounting brackets to wall securely.
5. Hang cabinet: Lift cabinet onto brackets, ensuring it locks into place.
6. Check level: Use spirit level to ensure cabinet is perfectly horizontal.
7. Secure cabinet: Add additional screws through back panel into wall for extra stability.

WARNING! Ensure cabinet is level and securely mounted before proceeding to plumbing.

Plumbing Connections

Connect water supply and waste pipe. If unsure, consult a qualified plumber.

1. Install tap: Insert tap through pre-drilled holes in sink, secure from below with nuts.
2. Connect water supply: Attach flexible hoses to hot and cold water valves, then to tap.
3. Install waste: Apply plumber's putty to drain flange, insert into sink drain hole, secure from below.
4. Connect trap: Attach P-trap to waste outlet and wall waste pipe.
5. Check for leaks: Turn on water supply slowly, check all connections for leaks.
6. Test drainage: Fill sink with water, release to check drainage speed and leaks.

CAUTION! Do not overtighten connections. Use thread seal tape on threaded joints if needed.

Specifications

• Overall Dimensions: Width: 800mm, Depth: 480mm, Height: 560mm.
• Sink Material: Vitreous ceramic.
• Cabinet Material: Particleboard with melamine foil, ABS edging.
• Weight Capacity: Max load 50kg distributed evenly.
• Water Resistance: Water-resistant edges, not waterproof.
• Color: White.
• Required Clearance: Minimum 500mm in front for door opening.
• Compliance: Meets relevant EU safety and quality standards.

Care & Maintenance

Regular care ensures long-lasting appearance and function.

1. Cleaning: Wipe surfaces with damp cloth and mild detergent. Dry immediately.
2. Avoid: Abrasive cleaners, scouring pads, acidic or alkaline cleaners on ceramic and surfaces.
3. Drain maintenance: Regularly clean pop-up waste to prevent clogging.
4. Door adjustment: Use screwdriver to adjust hinge tension if door sags or doesn't close properly.
5. Sealant check: Inspect sealant around sink annually, reapply if cracked or peeling.

CAUTION! Do not stand or sit on cabinet. Avoid excessive water exposure to cabinet edges.

Troubleshooting

Note: For persistent issues, contact IKEA customer support.

Warranty Information

IKEA offers a limited warranty on this product. Warranty covers material and manufacturing defects under normal household use for the specified period from date of purchase. Warranty does not cover damage from improper assembly, installation, misuse, accidents, or lack of maintenance. Keep your receipt as proof of purchase. For warranty claims, contact your local IKEA store or visit www.ikea.com.

Support: IKEA Customer Service: 1-800-434-4532 (US) or your local IKEA store.