The IKEA GONATT 304.670.87 is a safe and functional crib designed for infants and toddlers. It features adjustable mattress heights, a sturdy wooden frame, and meets international safety standards. This manual provides essential information for assembly, safety warnings, proper use, maintenance, and troubleshooting to ensure your child's safety and the longevity of the product.
Read all instructions before assembly and use. Failure to follow warnings and instructions can result in serious injury or death.
| Warning | Description |
|---|---|
| Fall Hazard | Always use the mattress at the correct height. Adjust to the lowest position before child can sit up. |
| Strangulation Hazard | Never add strings, cords, or loose bedding (pillows, thick quilts) to the crib. |
| Entrapment Hazard | Ensure all parts are securely fastened and there are no gaps larger than specified standards. |
| Tip-Over Hazard | Do not hang heavy items (bags, clothing) on crib sides. Ensure crib is on a level surface. |
| Age/Weight Limit | Use only for children who cannot climb out, typically under 35 inches tall or under 3 years old. |
Check that you have all parts before starting assembly. Contact IKEA if any parts are missing.
WARNING! Do not substitute hardware. Use only parts provided by IKEA.
Assemble on a soft, clean surface to avoid scratching parts. Two adults recommended.
CAUTION! Ensure all locking mechanisms are fully engaged before use.
To Adjust: Lift the mattress support frame out of its slots, reposition the support brackets to the desired height setting, and lower the frame back into the new slots. Ensure it clicks securely into place on both sides.
Use only a firm, well-fitting mattress designed for this crib. The gap between mattress and crib sides should not exceed two fingers width.
Do Not: Use a waterbed, add bumper pads, place crib near windows/blinds, or use if any part is broken or missing.
Monitor Wear: Regularly check for loose joints, sharp edges, splinters, or damaged slats.
Unplug any nearby electrical items before cleaning. Use only mild soap and water on a damp cloth. Wipe dry immediately.
CAUTION! Do not use abrasive cleaners, solvents, or ammonia-based products. Do not soak any part of the crib.
To disassemble, reverse the assembly order. Store all parts in a dry place, protected from moisture and extreme temperatures. Keep hardware in a labeled bag.
Tip: Take a photo during assembly to aid in reassembly.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Crib wobbles or feels unstable | Bolts not tightened; floor uneven | Re-tighten all connections firmly. Place on a level surface. |
| Mattress support seems loose | Not locked into correct height slot | Lift and re-seat the frame, ensuring it clicks into place on both sides. |
| Squeaking noises | Wood rubbing; loose joints | Tighten all hardware. Apply a small amount of paraffin wax (not lubricating oil) to rubbing points. |
| Difficulty adjusting mattress height | Frame under tension | Ensure mattress is removed before adjusting the support frame. |
| Slats feel loose or cracked | Damage or manufacturing defect | STOP USING THE CRIB IMMEDIATELY. Contact IKEA for replacement parts or advice. |
Reset: Disassemble and reassemble following instructions precisely if stability issues persist.
This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms for details. Always use original IKEA parts to maintain safety and warranty.
For support, spare parts, or more information:
Visit: www.ikea.com
Contact your local IKEA store.
Have the article number (304.670.87) and proof of purchase ready.