IKEA GODMORGON 493.850.39 Sink Cabinet instructions manual

The IKEA GODMORGON 493.850.39 is a modern sink cabinet designed for bathroom use, featuring a clean design, durable construction, and integrated storage solutions. This manual provides essential information for safe assembly, installation, use, and maintenance of your sink cabinet. Below are key sections covering safety, parts identification, step-by-step assembly, installation, care, and troubleshooting.

1. Parts & Components 2. Tools Required 3. Safety Instructions 4. Step-by-Step Assembly 5. Installation & Leveling 6. Connecting Plumbing 7. Care & Maintenance 8. Specifications 9. Warranty Information 10. Troubleshooting

Parts & Components

Before assembly, verify all parts are present. Key components include cabinet frame, doors/drawers, sink basin, mounting hardware, and plumbing fittings.

Part Name	Description	Quantity
Cabinet Frame	Main body structure	1
Sink Basin	Ceramic/acrylic integrated sink	1
Doors/Drawers	Front panels with handles	As per model
Mounting Brackets	For wall attachment (if applicable)	Set
Adjustable Feet	For height leveling	4
Screws & Dowels	Assembly hardware	Package
Plumbing Gasket	Drain seal	1
Instruction Manual	This guide	1

Tools Required

Gather these tools before starting assembly:

Phillips screwdriver
Hex key (Allen wrench, provided)
Hammer
Level
Measuring tape
Pencil
Adjustable wrench (for plumbing)

NOTE: Using incorrect tools may damage parts.

Safety Instructions

Read all instructions before assembly. Ensure a safe working environment.

Work Area: Use clean, flat surface with adequate space.
Lifting: Cabinet is heavy; use two people to avoid injury.
Children/Pets: Keep away during assembly.
Hardware: Keep small parts away from children to prevent choking.
Power Tools: Use with care; follow manufacturer instructions.

WARNING! Improper assembly may cause instability. Ensure all connections are tight and secure.

Step-by-Step Assembly

Follow steps in order. Do not overtighten screws.

Prepare Frame: Lay cabinet frame panels on soft surface to avoid scratches.
Attach Back Panel: Secure back panel to sides using provided screws.
Install Adjustable Feet: Screw feet into bottom corners; adjust later for leveling.
Assemble Drawers/Doors: Attach runners to sides; mount drawer boxes; attach front panels.
Mount Hinges: Attach hinges to doors and cabinet frame; adjust for alignment.
Install Sink Basin: Place basin into cutout; secure with brackets from underneath.
Final Check: Ensure all screws are tight; doors/drawers open smoothly.

Tip: Leave protective film on surfaces until assembly is complete.

Installation & Leveling

Proper installation ensures stability and function.

Position Cabinet: Move assembled cabinet to desired location.
Check Wall (if wall-mounted): Ensure wall is solid; use stud finder for mounting points.
Level Cabinet: Place level on top; adjust feet until bubble is centered.
Secure to Wall (if required): Attach anti-tip brackets to wall studs and cabinet back.
Final Adjustment: Re-check level after securing; adjust feet if needed.

CAUTION! Do not place cabinet on uneven floor. Ensure it is level to prevent stress on joints.

Connecting Plumbing

Connect water supply and drain after cabinet is installed and level.

Turn Off Water: Shut off main water supply before connecting.
Install Drain: Apply plumber's putty/tape; insert drain assembly into sink; tighten from below.
Connect P-Trap: Attach P-trap to drain pipe; ensure seal is watertight.
Attach Water Lines: Connect hot/cold supply lines to faucet valves; hand-tighten, then use wrench (do not overtighten).
Test for Leaks: Slowly turn on water; check all connections for drips; tighten if necessary.

WARNING! Overtightening may crack fittings. If unsure, consult a professional plumber.

Care & Maintenance

Proper care extends product life.

Cleaning: Wipe surfaces with damp cloth and mild detergent; dry immediately.
Avoid: Abrasive cleaners, scouring pads, acids, or bleach.
Hardware: Periodically check and tighten screws/hinges if loose.
Drain Maintenance: Use drain strainer to prevent clogs; clean regularly.
Water Exposure: Wipe spills promptly to prevent damage to wood/laminate.

CAUTION! Do not stand or sit on cabinet. Weight limit as per specifications.

Specifications

Model: GODMORGON 493.850.39
Dimensions (W x D x H): Approx. 31.5" x 18.875" x 34.25" (80 x 48 x 87 cm)
Material: Particleboard, foil, acrylic/ceramic sink
Color: As per variant (e.g., white, gray)
Weight Capacity: Sink basin: standard use; cabinet top: avoid excessive weight
Faucet Compatibility: Standard single-hole or widespread faucets
Warranty: Limited warranty as per IKEA terms

Warranty Information

IKEA offers a limited warranty covering material and manufacturing defects. Warranty period varies by region; check local IKEA store or website for details. Keep receipt as proof of purchase. Warranty does not cover damage from improper assembly, accidents, misuse, or normal wear and tear. For warranty claims, contact IKEA customer service with model number and receipt.

Troubleshooting

Issue	Possible Cause	Solution
Door/drawer not closing properly	Misaligned hinges/runners	Adjust hinges/runners; tighten screws.
Cabinet wobbles	Uneven floor; feet not adjusted	Re-level cabinet; adjust feet; ensure firm contact.
Water leak under sink	Loose connections; worn gasket	Tighten connections; replace drain gasket.
Scratches/damage on surface	Improper handling	Use touch-up pen (if available); avoid abrasive cleaning.
Missing parts	Packaging error	Contact IKEA with product number for replacement parts.

Support: For missing parts or assembly help, visit IKEA website or call local store.

Recycling: Dispose of packaging responsibly; recycle cardboard/plastic.