IKEA GODMORGON 393.324.66 Sink Cabinet instructions manual

The IKEA GODMORGON 393.324.66 is a bathroom sink cabinet designed for storage and functionality. It features a sink basin, cabinet with door and drawer, adjustable legs, water-resistant materials, and pre-drilled holes for faucet and plumbing. This manual covers safety, assembly, installation, use, care, and troubleshooting. Ensure you read all instructions before beginning assembly.

1. Package Contents & Tools Needed 2. Safety Information 3. Assembly Instructions 4. Installation & Levelling 5. Connecting Plumbing 6. Specifications 7. Using the Cabinet 8. Care & Maintenance 9. Warranty & Support 10. Troubleshooting

Package Contents & Tools Needed

Before starting, verify all parts are present. Key components: Sink basin, Cabinet frame, Door, Drawer front, Drawer runners, Adjustable legs, Mounting hardware, Plumbing template.

Part Description	Quantity	Image Ref.
Sink basin (ceramic)	1	A
Cabinet frame (particleboard)	1	B
Door with hinge pre-attached	1	C
Drawer front	1	D
Drawer runners (pair)	1 set	E
Adjustable legs	4	F
Mounting screws & plugs	1 pack	G
Plumbing template	1	H
Allen key (included)	1	I

Tools you need: Phillips screwdriver, adjustable wrench, level, pencil, tape measure, drill (for wall mounting if desired).

Safety Information

Read all instructions before assembly. Use proper lifting techniques.

Work Area: Assemble on a clean, flat, protected surface to avoid scratches.
Lifting: The sink basin is heavy and fragile. Lift with care; use two people.
Children & Pets: Keep small parts away during assembly to prevent choking.
Power Tools: Use caution with drills and screwdrivers. Wear safety glasses if drilling.
Plumbing: Shut off water supply before connecting faucet and drain.

WARNING! Ensure the cabinet is securely assembled and level before installation. An unstable cabinet can tip over, causing injury or damage.

Assembly Instructions

Follow steps in order. Do not fully tighten screws until all parts are aligned.

Attach Legs: Screw the four adjustable legs into the pre-drilled holes at the bottom corners of the cabinet frame. Hand-tighten only.
Assemble Drawer Runners: Attach the drawer runner halves to the cabinet interior sides using provided screws. Ensure they are level and at equal height.
Install Drawer: Slide the drawer box onto the runners. Attach the drawer front to the drawer box using screws from inside the drawer.
Mount Door Hinges: The door comes with hinges pre-attached. Align the door with the cabinet front and secure the hinge arms to the cabinet frame with screws.
Adjust Door & Drawer: Use the Allen key to adjust hinge screws for door alignment (up/down, in/out). Adjust drawer front if necessary.
Place Sink Basin: Carefully lower the sink basin into the cutout on top of the cabinet. Do not drop. It should sit flush.

Tip: Keep the cabinet upside down during initial leg attachment for easier access.

Installation & Levelling

Position the cabinet in its final location before connecting plumbing.

Position Cabinet: Move the assembled cabinet to the desired location against the wall.
Level the Cabinet: Place a level on top of the sink basin. Turn the adjustable legs to raise or lower each corner until the cabinet is perfectly level front-to-back and side-to-side.
Secure to Wall (Recommended): To prevent tipping, use the provided wall brackets and screws to secure the top rear of the cabinet to wall studs. Mark holes using the template, drill pilot holes, insert wall plugs, and screw brackets tight.
Final Check: Ensure the cabinet does not rock. Re-tighten leg locks if present.

CAUTION! A non-level cabinet can cause water to pool in the sink and improper door/drawer operation.

Connecting Plumbing

This cabinet has a pre-cut rear panel for standard P-trap and water lines.

Install Faucet: Follow your faucet's instructions. Insert the faucet tailpieces through the holes in the sink. Underneath, secure with mounting nuts and washers.
Connect Water Supply: Attach flexible water supply lines from the shut-off valves to the faucet hot and cold inlets. Hand-tighten, then use a wrench for a quarter turn more. Do not overtighten.
Install Drain & P-Trap: Apply plumber's putty or silicone sealant under the drain flange. Insert into sink drain hole. Underneath, attach the drain basket, washer, and locknut. Connect the P-trap to the drain tailpiece and the wall waste pipe.
Check for Leaks: Turn water supply on slowly. Check all connections for drips. Tighten slightly if needed. Let water run into the sink and check the P-trap for leaks.

Tip: Use a bucket under connections during testing to catch any initial drips.

Specifications

Model: GODMORGON 393.324.66
Overall Dimensions (W x D x H): 31.5" x 15.75" x 34.25" (80cm x 40cm x 87cm)
Sink Basin Material: Ceramic
Cabinet Material: Particleboard with foil finish, water-resistant edges
Door/Drawer Front: Foil or wood veneer (varies by color)
Adjustable Leg Height Range: Approx. 1" (2.5cm)
Max Load (top surface): 110 lbs (50 kg) evenly distributed
Faucet Hole Configuration: 1 or 3 holes (check your specific model)
Warranty: See limited warranty card included.

Using the Cabinet

Proper use ensures longevity.

Storage: The drawer and cabinet space are designed for bathroom toiletries. Avoid storing extremely heavy items.
Door & Drawer: Open and close gently. Do not hang on the door or use the drawer as a step.
Surface Care: Wipe spills on the sink and countertop immediately. Avoid placing very hot items directly on the surface.
Adjustments: Over time, doors may sag. Use the included Allen key to adjust the hinges (turn the vertical screw to raise/lower the door).

WARNING! Do not stand or sit on the cabinet. It is not designed to support a person's weight.

Care & Maintenance

Regular care keeps your cabinet looking new.

Cleaning Surfaces: Wipe with a soft, damp cloth. Use mild, non-abrasive detergent if needed. Dry immediately.
Avoid: Abrasive cleaners, scouring pads, acetone, or other strong solvents. Do not use silicone-based sprays near the cabinet.
Preventing Water Damage: Wipe up water spills around the sink edges and on the cabinet top promptly. Ensure the sealant around the sink and backsplash (if installed) is intact.
Hardware Check: Periodically check that leg adjustments, hinge screws, and drawer runner screws are tight.

CAUTION! Never allow water to stand on the cabinet surfaces for prolonged periods.

Warranty & Support

IKEA limited warranty applies. Refer to the warranty document for specific terms and duration.

Contact IKEA: For missing parts, assembly questions, or warranty claims:

Visit: www.ikea.com
Call your local IKEA store (find number on receipt or website).
Have your product article number (393.324.66) and receipt ready.

Spare Parts: Many small parts (screws, hinges, legs) can be obtained free of charge at IKEA customer service.

Troubleshooting

Issue	Possible Cause	Solution
Door does not close properly	Hinges misaligned; cabinet not level	Adjust hinge screws with Allen key. Re-level the cabinet.
Drawer sticks or is uneven	Runners misaligned; drawer front misaligned	Loosen runner screws, realign, retighten. Adjust drawer front attachment.
Cabinet rocks	Floor uneven; legs not adjusted	Re-adjust the four legs individually until stable. Use shims under legs if necessary.
Water leak under sink	Loose drain or supply connections; worn seal	Tighten connections. If leak persists, replace faucet washers or drain sealant.
Surface stain or damage	Harsh chemical exposure; impact	For minor stains, try mild soap. For chips in foil, use a touch-up pen (available at IKEA).
Squeaky door/drawer	Dry hinges/runners	Apply a small amount of silicone-based lubricant (not oil) to hinges and runner wheels.

Note: If a major part is defective (cracked sink, warped door), contact IKEA customer service with your receipt.