The IKEA GODMORGON 102.302.27 is a wall-mounted bathroom mirror designed for the GODMORGON series. It features a rectangular shape with a polished chrome frame, safety backing, and pre-drilled mounting holes for secure installation. Below are key sections for safety, features, installation, setup, care, and troubleshooting.
Key components: Rectangular mirror with polished chrome frame, safety backing film, mounting brackets, wall anchors, screws.
| Feature | Description |
|---|---|
| Frame Material | Polished chrome, corrosion-resistant |
| Mirror Type | Float glass with silver backing |
| Safety Backing | Protective film to prevent shattering |
| Mounting Type | Wall-mounted, fixed position |
| Pre-drilled Holes | For easy bracket attachment |
| Dimensions | As per product specifications |
| Weight | Moderate; requires secure mounting |
| Compatibility | Designed for GODMORGON series |
| Included Hardware | Brackets, screws, wall anchors |
| Finish | Polished, reflective surface |
Unpack and inspect contents. Ensure wall is suitable for mounting.
WARNING! Mirror is heavy; use two people for lifting. Ensure wall can support weight.
After installation, perform final checks.
CAUTION! Do not remove film until mounted to avoid damage.
No electronic controls; manual installation only.
Adjustments: Level during installation; secure tightening of screws.
Installation Tools Required: Drill, screwdriver, spirit level, stud finder (recommended).
Not applicable; mirror has no electronic connections.
Tip: For tile walls, use appropriate drill bits to avoid cracking.
Not applicable; mirror does not play media.
WARNING! Do not attempt to insert any objects into mirror.
Not applicable; mirror has no electronic accessibility features.
Use soft, lint-free cloth with mild glass cleaner. Avoid abrasive materials.
CAUTION! Do not use ammonia-based cleaners on frame; may damage finish.
Complies with relevant safety standards for glass products. Copyright © IKEA. For support, visit www.ikea.com or contact local IKEA customer service.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Mirror not level | Uneven mounting | Re-adjust brackets; use spirit level. |
| Frame scratches | During installation | Handle with care; avoid tools contact. |
| Loose mounting | Insufficient wall support | Reinforce with appropriate anchors/studs. |
| Glass streaks | Cleaning residue | Use proper glass cleaner; dry thoroughly. |
| Protective film hard to remove | Adhesive strong | Peel slowly from corner; use mild heat if needed. |
Reinstallation: If needed, remove carefully and repeat installation steps.
Service: Contact IKEA customer service for defects or missing parts.