IKEA GODMORGON 093.093.68 Sink Cabinet instructions manual

The IKEA GODMORGON 093.093.68 is a modern sink cabinet designed for bathroom installation, featuring a clean design, durable materials, and integrated storage. It includes the cabinet frame, sink basin, mounting hardware, and necessary fittings. Below are key sections for safety, parts list, assembly, installation, care, and warranty information.

1. Parts & Hardware Included 2. Safety Information 3. Tools Required 4. Assembly Instructions 5. Installation to Wall 6. Sink & Plumbing Connection 7. Door & Drawer Adjustment 8. Care & Maintenance 9. Specifications 10. Troubleshooting 11. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part Name	Quantity	Description/Image Ref.
Cabinet Frame	1	Main body with pre-drilled holes
Sink Basin	1	Ceramic/acrylic integrated sink
Door Panel	1	Front door with handle
Drawer Front	1	Drawer face panel
Drawer Runners	2	Side-mounted sliding mechanisms
Mounting Brackets	4	For wall attachment
Screws & Plugs	1 set	Various sizes for assembly and mounting
Adjustable Feet	4	For leveling the cabinet
Plumbing Gasket	1	For sink drain seal
Instruction Manual	1	This document

Safety Information

Read all instructions before assembly. Ensure a safe working environment.

Lifting: Cabinet and sink are heavy. Use two people to lift and position to avoid injury.
Stability: The cabinet must be securely attached to wall studs to prevent tipping.
Tools: Use appropriate tools. Wear safety glasses when drilling.
Plumbing: Turn off water supply before connecting plumbing. Check for leaks after installation.
Children: Keep children away from assembly area. Small parts are a choking hazard.

WARNING! Failure to properly secure the cabinet to the wall can result in serious injury or damage.

Tools Required

Not included. You will need:

Phillips screwdriver
Drill with appropriate bits for wall material (e.g., wood, masonry)
Level
Measuring tape
Pencil
Adjustable wrench or pliers (for plumbing connections)
Safety glasses

Assembly Instructions

Assemble the cabinet frame on a soft, clean surface to avoid scratches.

Attach Feet: Screw the four adjustable feet into the pre-drilled holes at the bottom corners of the cabinet frame.
Install Drawer Runners: Attach the drawer runners to the inside of the cabinet frame using the provided screws. Ensure they are level and aligned.
Mount the Drawer: Slide the drawer box onto the runners. Attach the drawer front panel to the drawer box using the screws from the inside.
Attach the Door: Hang the door on the hinges pre-attached to the cabinet frame. Adjust the hinges later for perfect alignment.
Install Mounting Brackets: Attach the wall-mounting brackets to the back of the cabinet frame at the top, using the indicated holes and screws.

Tip: Do not fully tighten all screws until the cabinet is level and the door/drawer are aligned.

Installation to Wall

The cabinet must be anchored to solid wall studs.

Locate Studs: Use a stud finder to locate at least two wall studs where the cabinet will hang.
Mark & Drill: Hold the cabinet in its desired position (use a helper). Use a level to ensure it is perfectly horizontal. Mark the positions of the mounting brackets on the wall through the holes. Drill pilot holes into the wall studs.
Secure Cabinet: Lift the cabinet into place, aligning the bracket holes with the pilot holes. Secure the cabinet to the wall with the long screws provided. Tighten securely.
Level the Cabinet: Adjust the feet at the bottom of the cabinet until it is perfectly level and does not rock.

CAUTION! Do not rely on drywall anchors alone. The weight of the sink, water, and contents requires support from wall studs.

Sink & Plumbing Connection

Place the sink basin into the prepared opening on the cabinet top.

Seal the Sink: Apply a bead of silicone sealant (not included) around the underside edge of the sink rim before placing it in the cutout. Press down firmly.
Connect the Drain: From below, attach the drain assembly to the sink outlet. Use the provided gasket to ensure a watertight seal. Tighten the locknut securely with pliers.
Connect Water Supply: Connect the hot and cold water supply lines to the faucet valves (faucet not included in GODMORGON 093.093.68). Hand-tighten, then use an adjustable wrench for a final quarter-turn. Do not overtighten.
Check for Leaks: Turn the water supply back on slowly. Check all connections for leaks. Tighten slightly if necessary.

WARNING! Allow silicone sealant to cure fully (as per product instructions, usually 24 hours) before using the sink.

Door & Drawer Adjustment

Fine-tune the fit of the door and drawer for smooth operation.

Door Height/Level: Open the door. Use a screwdriver to turn the adjustment screws on the hinges. Clockwise usually raises the door; counterclockwise lowers it.
Door Depth/Gap: Other screws on the hinge control how close the door sits to the frame. Adjust to ensure even gaps on all sides.
Drawer Alignment: If the drawer is crooked, loosen the screws holding the drawer front slightly, reposition, and retighten.
Drawer Runners: Most runners have a lever to detach the drawer. Ensure it clicks back in fully for smooth sliding.

Care & Maintenance

Proper care will extend the life of your sink cabinet.

Cleaning Surfaces: Wipe the cabinet exterior and door with a damp, soft cloth. Use a mild detergent if needed. Dry immediately.
Sink Basin: Clean with non-abrasive cleaners suitable for the sink material (ceramic/acrylic). Avoid harsh chemicals like bleach or drain cleaners.
Avoid Moisture: Wipe up spills and splashes promptly, especially around the sink edge and sealant.
Hardware Check: Periodically check that mounting screws, hinges, and drawer runners are tight.

CAUTION! Do not use abrasive pads, scouring powders, or acidic cleaners on surfaces. Do not stand or sit on the cabinet.

Specifications

Model: GODMORGON 093.093.68
Color/Finish: As specified at purchase (e.g., white, gray).
Overall Dimensions (approx.): Width: [e.g., 31.5"], Depth: [e.g., 22.875"], Height: [e.g., 29.875"] (Including countertop).
Sink Cutout Dimensions: Provided in separate measurement guide.
Material: Particleboard, foil, ABS plastic, ceramic/acrylic sink.
Max Load Drawer: Refer to IKEA website for weight limit.
Warranty: See limited warranty terms.

Troubleshooting

Issue	Possible Cause	Solution
Cabinet is not level	Uneven floor or incorrect foot adjustment	Adjust the four feet under the cabinet until level.
Door does not close properly	Hinges misaligned	Adjust the hinge screws for height and depth.
Drawer sticks or is uneven	Runners misaligned or drawer front crooked	Check runner alignment. Loosen drawer front screws, align, and retighten.
Water leak under sink	Loose drain connection or faulty sealant	Tighten drain locknut. If leak persists, reapply silicone sealant around sink rim.
Cabinet feels unstable	Not securely attached to wall studs	Ensure mounting screws are driven into wall studs and tightened securely.

Warranty & Support

This IKEA product is covered by a limited warranty. For details, refer to the IKEA warranty booklet included with your purchase or visit www.ikea.com.

Customer Support:

Visit the IKEA store where you made your purchase.
Contact IKEA Customer Support: 1-888-888-4532
Online: www.ikea.com/us/en/customer-service

Note: Keep your receipt as proof of purchase. Warranty does not cover damage from improper assembly, installation, modification, or lack of maintenance.