IKEA GERSBY 702.611.31 Bookcase instructions manual

The IKEA GERSBY 702.611.31 is a versatile and modern bookcase designed for home or office use. It features a clean, minimalist design, sturdy particleboard construction with a white finish, adjustable shelves for customizable storage, and a weight capacity suitable for books, decorative items, and media. Below are key sections for safety, assembly, installation, care, and troubleshooting.

Features at a Glance

Key components: Particleboard shelves and sides, metal shelf supports, wall anchoring kit, assembly hardware.

Package Contents

Unpack and verify all parts before assembly. Contact IKEA if any item is missing.

1. Side panels (2)
2. Shelves (4 or as per model)
3. Back panel (1)
4. Metal shelf supports (set)
5. Wall anchoring kit (screws, brackets)
6. Assembly hardware (cam locks, screws, dowels)
7. Assembly tool (Allen key)
8. Instruction manual

WARNING! Keep packaging away from children to avoid suffocation risk.

Safety Instructions

Read all instructions before assembly. Use on stable, level surface.

1. Assemble on soft surface to avoid scratches.
2. Use two people for assembly; some parts are heavy.
3. Secure to wall using provided anchoring kit to prevent tipping.
4. Do not exceed maximum load per shelf.
5. Keep away from direct heat sources and moisture.

CAUTION! Failure to secure bookcase to wall can result in serious injury or death, especially if children are present.

Assembly Instructions

Follow step-by-step diagrams in included paper manual. Summary below:

1. Lay side panels on protected floor.
2. Insert dowels and cam locks as marked.
3. Attach back panel to sides using provided screws.
4. Insert shelf supports into pre-drilled holes at desired heights.
5. Place shelves on supports, ensure they are level and secure.
6. Tighten all cam locks with Allen key.
7. Attach wall anchoring brackets to top rear of bookcase.
8. Locate wall studs, mount bookcase securely.

Tip: Do not fully tighten cam locks until all parts are aligned.

Installation & Placement

• Location: Place on even, stable floor against wall.
• Wall Anchoring: Mandatory. Use included kit and fix to solid wall (studs preferred).
• Clearance: Allow space for doors/drawers to open if nearby.
• Environment: Avoid humid areas (bathrooms) and direct sunlight to prevent warping/fading.

Adjusting Shelves

Shelves can be repositioned for different storage needs.

1. Remove all items from shelf.
2. Lift shelf up and out of supports.
3. Reposition metal supports to desired height (use pre-drilled holes).
4. Lower shelf onto supports, ensuring it sits evenly.
5. Redistribute weight evenly; avoid overloading one side.

Note: Do not place heavy items on highest shelf if bookcase is not anchored.

Care & Maintenance

Clean with damp cloth; dry immediately. Do not use abrasive cleaners.

CAUTION! Avoid excessive water; never soak. Do not use wax or polish.

Specifications

• Model: GERSBY 702.611.31
• Color: White
• Material: Particleboard, Fiberboard, Plastic, Steel
• Dimensions (approx): 31 ½" W x 11 ¾" D x 72 ⅞" H (Check product label)
• Weight: [Weight of assembled unit]
• Max Load/Shelf: Refer to manual sticker (typically 15-30 lbs)
• Country of Origin: See packaging

Warranty Information

IKEA limited warranty applies. See IKEA terms or www.ikea.com for details. Keep receipt. Warranty covers material and manufacturing defects under normal use. Does not cover damage from improper assembly, accidents, or modifications.

Troubleshooting

Support: Visit www.ikea.com or contact your local IKEA store.