IKEA GENOMDRIVA 304.621.36 Range Hood instructions manual

The IKEA GENOMDRIVA 304.621.36 is a wall-mounted range hood designed for efficient kitchen ventilation. It features multiple fan speeds, integrated lighting, aluminum grease filters, and a recirculation or external exhaust option. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Safety Information 2. Product Overview & Features 3. Installation Instructions 4. Specifications 5. Controls and Operation 6. Ducting Configuration 7. Using the Range Hood 8. Maintenance & Cleaning 9. Replacing Parts 10. Regulatory Information 11. Troubleshooting

Safety Information

Read all instructions before installation and use. Keep manual for future reference.

Symbol/Note	Meaning
WARNING!	Risk of electric shock, fire, or injury. Disconnect power before servicing.
CAUTION!	Risk of damage to appliance or property.
NOTE	Important information for correct operation.

WARNING! Installation must be performed by a qualified person in accordance with local building and electrical codes. Ensure the hood is properly grounded.

Product Overview & Features

Key components: Hood body, control panel, aluminum grease filter(s), lighting unit, exhaust adapter, and mounting hardware.

Feature	Description
Control Panel	Buttons for power, fan speed, and light
Fan Speeds	Typically 3 speeds plus intensive/boost setting
Lighting	Integrated halogen or LED lamp(s)
Grease Filters	Washable aluminum mesh filters
Exhaust Options	Ducted (external venting) or Recirculation (with charcoal filter)
Dimensions (approx.)	Width: 60 cm, Height: Adjustable, Depth: 50 cm

Installation Instructions

Choose installation type: Ducted (vented outside) or Recirculation (filters air back into kitchen).

Prepare the location: Ensure wall is sturdy and can support hood weight. Check for studs.
Mark and drill: Use template (if provided) to mark screw holes for mounting bracket.
Mount bracket: Securely attach the mounting bracket to the wall with supplied screws.
Electrical connection: Connect hood to dedicated electrical circuit as per local codes. Disconnect power first.
Hang hood: Lift hood onto bracket and secure it.
Connect ducting: Attach duct pipe to hood outlet and route to exterior vent (for ducted mode).
Install filters/light: Insert grease filters and install light bulb(s).

CAUTION! Minimum distance between hood and cooktop must be as specified in manual (typically 65-75 cm for electric, 75-85 cm for gas).

Specifications

Model: GENOMDRIVA 304.621.36
Type: Wall-mounted range hood
Power Supply: 120V AC, 60Hz (or 230V, 50Hz depending on region)
Motor Power: [e.g., 180 W]
Maximum Airflow: [e.g., 400 m³/h]
Noise Level: [e.g., 65 dB max]
Lighting: [e.g., 2 x max 40W halogen or integrated LED]
Filter Type: Aluminum grease filter(s), optional charcoal filter for recirculation
Control: Mechanical push buttons or touch controls
Duct Diameter: 150 mm (6 inches) recommended

Controls and Operation

Control Panel Buttons (typical layout):

Power (0/I): Turns the hood on/off.
Fan Speed (1, 2, 3): Selects low, medium, or high extraction speed.
Boost/Intensive (or 4): Maximum speed for 10-15 minutes, then returns to previous speed.
Light: Turns the integrated light on/off.

Operation: Turn on light before cooking if needed. Start fan at low speed for normal cooking, increase speed for frying or steaming. Use boost function for intense smoke/odor.

Ducting Configuration

Ducted Mode (Vented Outside):

Use shortest, straightest duct path possible for best performance.
Use rigid metal ducting, not flexible plastic.
Install a wall or roof cap with backdraft damper.

Recirculation Mode:

Install the charcoal filter(s) behind the grease filter(s).
Ensure the recirculation vent cover is open (no duct attached).
Charcoal filters must be replaced periodically (every 3-6 months).

NOTE: Performance is generally better in ducted mode.

Using the Range Hood

Turn on the hood light for better visibility.
Start the fan before you begin cooking to establish airflow.
Select fan speed appropriate to cooking activity.
Let the fan run for 5-10 minutes after cooking to clear residual steam and odors.
Turn off fan and light when finished.

Tip: Clean cookware and surfaces promptly to reduce grease load on the filters.

Maintenance & Cleaning

WARNING! Disconnect power before any cleaning or maintenance.

Exterior: Wipe with a soft, damp cloth and mild detergent. Dry immediately. Do not use abrasive cleaners or scouring pads.

Grease Filters: Clean every 4-8 weeks depending on use.

Remove filter(s) by pushing latch or pulling handle.
Soak in hot water with mild degreaser.
Rinse thoroughly and let dry completely.
Reinstall filter(s).

CAUTION! Do not operate hood without grease filters installed.

Replacing Parts

Light Bulb Replacement:

Disconnect power.
Remove grease filter to access light cover.
Remove cover and replace bulb with same type and wattage (e.g., E14 40W max halogen or specified LED).
Reinstall cover and filter.

Charcoal Filter Replacement (Recirculation only): Remove grease filter, slide out old charcoal filter, insert new one.

NOTE: Use only IKEA recommended spare parts for safety and performance.

Regulatory Information

This appliance complies with relevant EU Directives and standards (e.g., LVD, EMC). Disposal: At end of life, dispose of the product according to local regulations for electrical and electronic waste (WEEE). Do not dispose with household waste. For more information, contact your local IKEA store or municipal waste authority.

IKEA Guarantee: Refer to the IKEA warranty card for terms and conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Hood does not turn on	No power	Check circuit breaker/fuse. Ensure plug is connected (if applicable).
Weak suction	Clogged filters, blocked duct	Clean grease filters. Check duct for obstructions. Ensure damper opens freely.
Loud noise/vibration	Loose parts, dirty fan	Tighten mounting screws. Clean fan blades (by qualified service).
Light does not work	Bulb burnt out	Replace bulb. Ensure power is disconnected first.
Motor runs but no airflow (Recirc.)	Charcoal filter saturated	Replace charcoal filter.
Unpleasant odor	Dirty filters, recirc. filter spent	Clean grease filters. Replace charcoal filter.

For Service: Do not attempt to repair the motor or electrical system yourself. Contact IKEA customer support or a qualified technician.