The IKEA FÖRBÄTTRA 204.706.84 Cover Panel is designed to conceal the front of kitchen appliances or cabinets, creating a seamless, integrated look with your kitchen fronts. It is part of the IKEA kitchen system and requires proper installation and handling. Below are key sections for safety, features, installation, setup, care, and troubleshooting.
Key components: Cover Panel, Mounting brackets, Screws, Installation template.
| Feature | Description |
|---|---|
| Material | High-pressure laminate (HPL) or similar, matching IKEA kitchen fronts |
| Dimensions | Refer to product label for exact width, height, and thickness |
| Mounting System | Designed for attachment to compatible IKEA appliances or frames |
| Finish | Smooth, easy-to-clean surface resistant to kitchen stains |
| Compatibility | Fits specific IKEA kitchen models and appliance sizes |
| Color/Design | Available in various colors to match IKEA kitchen series |
| Weight | Lightweight for easy handling |
| Pre-drilled Holes | For simplified mounting alignment |
| Edge Profile | Designed to align flush with adjacent cabinets |
| Packaging | Includes all necessary hardware and instructions |
Unpack and inspect contents. Ensure you have the correct panel for your appliance/cabinet.
WARNING! Panel is fragile; handle with care to avoid cracks or damage. Use two people for lifting larger panels.
After installation, verify fit and function.
CAUTION! Do not force the panel into place. Ensure mounting brackets are correctly positioned.
This cover panel is a passive component with no electronic controls. Adjustments relate to physical installation.
Alignment: Use a level to ensure horizontal and vertical alignment during mounting.
Spacing: Maintain recommended gaps (if any) for ventilation or door clearance as per kitchen design guidelines.
Mounting Pressure: Screws should be snug but not overtightened to prevent surface damage.
Not applicable. This is a non-electrical cover panel.
Tip: Always disconnect power to appliances before installing adjacent panels for safety.
Not applicable. This section does not pertain to the cover panel.
Not applicable. The panel is a static physical component.
Use a soft, damp cloth with mild detergent if needed. Wipe dry immediately.
CAUTION! Do not use abrasive cleaners, scouring pads, or harsh chemicals. Avoid excessive moisture.
Complies with relevant furniture safety standards. Material safety data available upon request. IKEA and FÖRBÄTTRA are trademarks of Inter IKEA Systems B.V. For support, visit www.ikea.com or contact your local IKEA store.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Panel does not fit | Wrong size/model | Verify article number and dimensions. Ensure it's for your specific appliance/cabinet. |
| Panel not level | Uneven mounting or frame | Check appliance/cabinet level first. Loosen screws, adjust panel, re-tighten. |
| Gaps between panel and cabinets | Misalignment or bracket issue | Re-align using a level. Ensure brackets are mounted correctly on the appliance. |
| Surface damage (scratch, crack) | Improper handling during installation | Handle with care. Use protective gloves and surface covers during installation. |
| Door/drawer obstruction | Panel mounted too close | Reposition panel to allow full clearance for adjacent doors/drawers. |
Replacement: If damaged, contact IKEA for spare parts using article number 204.706.84.
Service: www.ikea.com or local IKEA customer service.