IKEA FRANKLIN 504.064.65 Bar Stool instructions manual
The IKEA FRANKLIN 504.064.65 is a modern bar stool featuring a sturdy metal frame, a comfortable seat, and a footrest. Designed for stability and everyday use, it is suitable for kitchen islands, breakfast bars, or home bars. This manual provides essential information for safe assembly, use, care, and troubleshooting.
Parts & Tools Included
Before assembly, verify all parts are present and undamaged.
| Part Description | Quantity | Image Reference |
| Seat | 1 | A |
| Metal Frame (Legs & Backrest) | 1 | B |
| Footrest Bar | 1 | C |
| Pack of Screws & Bolts | 1 set | D |
| Allen Key (provided) | 1 | E |
| Plastic Caps (for screw holes) | 4 | F |
Note: Keep packaging away from children to avoid risk of suffocation.
Safety Information
Read all instructions before assembly and use.
- Assembly: Assemble on a soft surface to avoid scratching parts. Tighten all fasteners securely.
- Weight Limit: Maximum load: 250 lbs (113 kg). Do not exceed.
- Stability: Ensure all four legs touch the floor evenly. Do not stand on the stool or use as a step ladder.
- Children: Do not allow children to climb or play on the stool. Adult supervision is advised.
- Inspection: Periodically check and retighten screws and bolts to maintain stability.
WARNING! Improper assembly or overloading can cause injury or damage. Assemble according to instructions only.
Assembly Instructions
Estimated assembly time: 15-20 minutes. Follow steps in order.
- Attach Legs to Frame: Place the metal frame (B) upside down on a soft cloth. Align the pre-drilled holes on the legs with the corresponding holes on the central column. Insert and hand-tighten the provided bolts (D) using the Allen key (E).
- Install Footrest: Slide the footrest bar (C) into the slots on the lower part of the frame. Secure with the smaller screws from pack D. Ensure it is level and tight.
- Attach the Seat: Turn the frame upright. Position the seat (A) on top of the frame, aligning the holes on the seat base with those on the frame. Insert and tighten the remaining screws from below using the Allen key.
- Final Check: Press the plastic caps (F) into the visible screw holes on the seat for a finished look. Ensure all connections are firm and the stool does not wobble.
Tip: Do not overtighten screws, as this may strip the threads or damage the material.
Specifications
- Product Name: FRANKLIN Bar Stool
- Article Number: 504.064.65
- Overall Height: 29.5 inches (75 cm)
- Seat Height: 24.8 inches (63 cm)
- Seat Width: 15.7 inches (40 cm)
- Seat Depth: 13.8 inches (35 cm)
- Material: Seat: Particleboard, foil; Frame: Steel, epoxy/polyester powder coating
- Color: Black/Brown
- Weight Capacity: 250 lbs (113 kg)
- Packaged Weight: 15.4 lbs (7 kg)
Adjustments & Use
This model is not height-adjustable. For optimal use:
- Positioning: Place the stool on a flat, level surface. Ensure there is adequate space around it.
- Sitting: Sit squarely on the seat, using the footrest for comfort and stability.
- Moving: Lift the stool to reposition it; do not drag it across the floor, as this may damage the floor and the stool tips.
- Compatibility: Designed for counter heights of approximately 35-40 inches (89-102 cm).
Note: The backrest provides lumbar support; avoid leaning back excessively.
Care & Maintenance
Proper care ensures longevity.
- Cleaning Seat: Wipe with a damp, soft cloth. Do not use abrasive cleaners, solvents, or excessive water.
- Cleaning Frame: Use a dry or slightly damp cloth. For stubborn marks, use a mild soap solution, then dry immediately.
- Protection: Avoid placing in direct sunlight or near heat sources to prevent fading or warping.
- Inspection: Check tightness of screws and bolts every few months. Retighten if necessary.
CAUTION! Never immerse any part of the stool in water. Do not use steam cleaners.
Troubleshooting
| Issue | Possible Cause | Solution |
| Stool wobbles | Uneven floor; loose screws | Place on level surface; check and tighten all screws/bolts, especially where legs attach to frame. |
| Squeaking noise | Metal parts rubbing; loose joints | Tighten all connections. If noise persists, apply a small amount of furniture wax or silicone lubricant to moving joints. |
| Scratches on floor | Dirt/debris on leg tips; dragging stool | Clean plastic tips on legs. Always lift the stool to move it. |
| Seat feels loose | Screws attaching seat to frame are loose | Tighten the screws under the seat using the provided Allen key. |
| Difficulty assembling | Parts misaligned; wrong screw used | Double-check the step diagram. Ensure you are using the correct screws for each step as shown in the manual. |
Warranty & Support
IKEA limited warranty applies. Refer to the IKEA warranty brochure included in the packaging or available at IKEA stores for full terms and conditions.
Missing Parts or Damage: Contact IKEA customer service with your article number (504.064.65) and proof of purchase.
Support: For assembly help or further questions:
Visit: www.ikea.com
Contact your local IKEA store.
Refer to the last page of the physical manual for regional contact numbers.
Recycling: At end of life, disassemble and dispose of materials according to local recycling regulations.
IKEA FRANKLIN 504.064.65 Bar Stool instructions manual © - All Rights Reserved 2025