IKEA FORSÅ 704.162.46 Work Lamp instructions manual

The IKEA FORSÅ 704.162.46 is an adjustable work lamp designed for focused task lighting. It features a flexible gooseneck arm, a stable weighted base, an energy-efficient LED bulb, an on/off switch, and a classic, durable design suitable for desks, workbenches, or reading nooks. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup & Operation 4. Specifications 5. Controls and Adjustment 6. Bulb Replacement 7. Positioning for Optimal Light 8. Safety Information 9. Care & Cleaning 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Weighted metal base, Flexible gooseneck arm, Lamp shade with built-in LED, On/Off switch on cord, Power cord with plug.

Feature	Description
Weighted Base	Provides stability and prevents tipping
Flexible Gooseneck Arm	Allows precise positioning of the light direction
Integrated LED Light Source	Energy-efficient, long-life bulb (non-replaceable in standard model)
On/Off Switch	Inline switch on the power cord for easy access
Classic Design	Matte finish suitable for various interiors
Cable Length	Approx. 1.5 meters (59 inches)

Assembly Instructions

Unpack all parts and check contents. Assembly requires no tools.

Attach the base: Place the weighted base on a flat, stable surface.
Connect the gooseneck: Screw the threaded end of the flexible gooseneck arm firmly into the socket on the base.
Attach the lamp head: Screw the lamp head (shade with LED) onto the top of the gooseneck arm. Hand-tighten securely.
Route the cord: Arrange the power cord neatly from the base to your power outlet.

WARNING! Ensure the lamp is unplugged during assembly. Do not overtighten connections.

First-Time Setup & Operation

After assembly, plug the lamp into a standard electrical outlet.

Power On: Press the inline switch on the cord to the "I" position to turn the lamp on.
Adjust Position: Gently bend the gooseneck arm to direct light where needed. The arm holds its position.
Power Off: Press the switch to the "O" position to turn off.

CAUTION! Do not bend the gooseneck arm forcefully or repeatedly at sharp angles, as this may damage it.

Specifications

Product Name: FORSÅ Work Lamp.
Article Number: 704.162.46.
Light Source: Integrated, non-replaceable LED.
Power Consumption: 3.5 W (equivalent to approx. 30W incandescent).
Color Temperature: 2700 Kelvin (Warm White).
Luminous Flux: 230 Lumen.
Flexible Arm Length: Approx. 35 cm (13.8 inches).
Base Diameter: Approx. 15 cm (5.9 inches).
Input Voltage: 100-240V AC, 50/60Hz.
Cable Length: 1.5 m (59 inches).

Controls and Adjustment

The lamp has one primary control: the inline On/Off switch on the power cord.

Positioning: The main feature is the flexible gooseneck. Grip the lamp head or the arm itself (not the thin neck near joints) to bend and shape the light direction. It is designed to hold its position once set.

Note: This model does not have a dimmer function. Light output is fixed.

Bulb Replacement

The FORSÅ 704.162.46 model features an integrated LED light source that is not user-replaceable. The LED is designed for a very long lifetime under normal use.

If the light fails: The entire lamp unit must be replaced. Do not attempt to open the lamp head, as this will void the warranty and may be dangerous.

Positioning for Optimal Light

Place the lamp on a stable, flat surface like a desk or table.
Position the base so the cord has a clear path to the outlet and is not a tripping hazard.
Bend the gooseneck so the light shines directly onto your work area (e.g., book, keyboard, craft) without shining directly into your eyes or creating glare on a screen.
The weighted base should keep the lamp steady. Avoid positioning where the arm is fully extended horizontally, as this may make it top-heavy.

Safety Information

Important Safety Instructions:

This lamp is for indoor use only.
Always unplug the lamp before cleaning or if not used for an extended period.
Do not use the lamp if the cord or plug is damaged.
Do not place the lamp near hot surfaces, open flames, or in damp locations (e.g., bathroom).
Do not cover the lamp shade or allow flammable materials to come into contact with it during operation.
The lamp may become warm during use. Avoid touching the lamp head for extended periods.
Keep out of reach of young children.

Care & Cleaning

Unplug the lamp from the electrical outlet before cleaning.

Exterior Surfaces: Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays.
Gooseneck Arm: Wipe gently with a dry cloth. Do not pull or twist excessively while cleaning.
Lamp Shade: Dust with a soft, dry cloth.

CAUTION! Never immerse the lamp, base, or cord in water or other liquids.

Warranty & Support

This IKEA product is guaranteed under the terms of the IKEA commercial warranty. Refer to your IKEA receipt or the IKEA website for the specific warranty duration and conditions in your country.

For assembly help, spare parts, or other support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to the product documentation or packaging for country-specific contact details.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Faulty switch	Ensure plug is firmly in outlet. Check that the inline switch is in the "I" (On) position. Try a different outlet.
Lamp flickers or is dim	Loose connection / End of LED life	Check that the lamp head and gooseneck are screwed on tightly. If problem persists, the integrated LED may be failing.
Gooseneck will not hold position	Over-extended / Worn out	Do not bend the arm at extreme angles. Gently reposition. If it consistently slumps, the internal mechanism may be worn.
Lamp is unstable or tips over	Base not flat / Arm over-extended	Place lamp on a flat, level surface. Reposition the gooseneck so the center of gravity is more centered over the base.
Unusual smell or heat	Electrical fault	Immediately unplug the lamp and discontinue use. Contact IKEA support for advice. Do not attempt repair.

Recycling: At end of life, do not dispose with household waste. Recycle according to local regulations for electrical and electronic equipment.