IKEA FORSÅ 505.217.81 Work Lamp instructions manual

The IKEA FORSÅ 505.217.81 is an adjustable work lamp designed for focused illumination on desks, workbenches, or reading areas. It features a flexible gooseneck arm, a stable weighted base, an energy-efficient E14 bulb socket (bulb not included), an on/off switch, and a classic design suitable for various interiors. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Parts & Components 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Operation & Adjustment 6. Bulb Replacement 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts & Components

Key components included in the package: Weighted Base, Flexible Gooseneck Arm, Lamp Shade, E14 Bulb Socket with Switch, Mounting Hardware, Instruction Manual.

PartDescription
Weighted BaseProvides stability; houses electrical components
Flexible Gooseneck ArmAdjustable arm for directing light
Lamp ShadeDirects and diffuses light; attaches to arm
E14 Bulb SocketHolds bulb (max 7W LED or equivalent)
On/Off SwitchIntegrated into socket or cord
Power CordStandard plug for 120V AC outlet
Mounting HardwareScrews/washers for assembly (if required)

Safety Information

Read all instructions before assembly and use.

  1. Use only with E14 bulb, max 7W LED or equivalent. Do not exceed wattage.
  2. Unplug lamp before assembly, cleaning, or bulb replacement.
  3. Place on stable, flat surface to prevent tipping.
  4. Keep away from water, heat sources, and flammable materials.
  5. Do not modify cord or use with damaged parts.

WARNING! Risk of electric shock or fire if used improperly. Not for outdoor use.

Assembly Instructions

Estimated assembly time: 10-15 minutes. Tools required: None (hand-tighten).

  1. Attach gooseneck arm to base: Insert arm into base socket; tighten screw clockwise.
  2. Attach lamp shade to arm: Slide shade onto top of arm; secure with provided ring.
  3. Insert bulb: Ensure lamp is unplugged. Screw E14 bulb into socket (not included).
  4. Place on surface: Ensure base sits flat; adjust gooseneck as needed.
  5. Plug into outlet: Use standard 120V AC wall outlet.

CAUTION! Do not overtighten parts. Ensure all connections are secure.

Specifications

Operation & Adjustment

Plug into outlet; switch on. Adjust gooseneck arm by gently bending to direct light where needed.

Tips:

Note: Lamp may become warm during extended use; this is normal.

Bulb Replacement

Use only E14 bulb, max 7W LED or equivalent.

  1. Unplug lamp and allow to cool if recently used.
  2. Gently unscrew old bulb counterclockwise.
  3. Screw new bulb clockwise into socket; do not overtighten.
  4. Plug in and test.

WARNING! Never use bulb exceeding max wattage. Dispose of old bulbs properly.

Care & Maintenance

Unplug before cleaning. Wipe with dry or slightly damp cloth. Do not immerse in water or use abrasive cleaners.

CAUTION! Do not spray liquids directly on lamp. Keep cord away from sharp edges.

Troubleshooting

SymptomPossible CauseCorrective Action
Lamp does not turn onBulb loose/dead; no powerCheck bulb is screwed in; try known-working bulb; check outlet and cord.
Lamp flickersLoose bulb; faulty bulbEnsure bulb is tight; replace bulb.
Arm does not hold positionOver-adjusted; wornGently reposition; avoid excessive bending.
Lamp tips overUneven surface; base not securePlace on flat, stable surface; ensure base is properly attached.
OverheatingBulb wattage too highUse only recommended bulb type/wattage.

Warranty & Support

IKEA limited warranty applies (refer to IKEA warranty terms). For assistance, contact IKEA customer service or visit www.ikea.com. Keep receipt for warranty claims.

Recycling: Dispose of lamp and bulb according to local regulations.

IKEA FORSÅ 505.217.81 Work Lamp instructions manual © - All Rights Reserved 2025