IKEA FLOTTILJ 105.497.77 Desk Lamp instructions manual

The IKEA FLOTTILJ 105.497.77 is a modern desk lamp featuring an adjustable arm and head for directional lighting, an energy-efficient LED light source, an integrated on/off switch, and a stable weighted base. It requires assembly and is designed for use in home offices, studies, or bedside tables. Below are key sections for safety, features, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Parts Included 3. Assembly Instructions 4. Specifications 5. Controls and Operation 6. Positioning and Use 7. Bulb Replacement 8. Care & Cleaning 9. Safety Information 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Adjustable metal arm, Rotatable lamp head, Weighted stable base, Integrated on/off switch, Non-dimmable LED light source.

Feature	Description
Adjustable Arm	Allows for height and angle adjustment to direct light
Rotatable Head	Head can be tilted to focus light where needed
Weighted Base	Provides stability to prevent tipping
Integrated Switch	On/off switch located on the cord or base
LED Light Source	Energy-efficient, long-life integrated LED module
Power Cord	Standard power cord with plug
Finish	Powder-coated metal for durability

Parts Included

Unpack and verify all parts are present before assembly.

Lamp Base (weighted)
Adjustable Arm (1 piece)
Lamp Head with integrated LED
Mounting Hardware (screws, possibly a washer)
Power Cord with integrated switch
Instruction Manual (this sheet)

WARNING! Keep small parts away from children to avoid choking hazard.

Assembly Instructions

Follow steps in order. No tools required aside from possibly a screwdriver (not typically needed).

Prepare the Base: Place the weighted base on a flat, stable surface.
Attach the Arm: Insert the lower end of the adjustable arm into the socket on the base. It may click or twist to lock. Ensure it is secure.
Attach the Lamp Head: Connect the lamp head to the top of the arm. It typically slides on and may have a tightening mechanism (knob or screw) to secure the angle. Do not overtighten.
Route the Cord: Run the power cord along the arm or through provided channels if any, ensuring it is not pinched.
Final Check: Gently adjust the arm and head to ensure all joints move smoothly and are secure.

CAUTION! Assemble on a soft surface to avoid scratching finishes. Ensure all connections are tight before use.

Specifications

Product Name: FLOTTILJ
Article Number: 105.497.77
Light Source: Integrated non-replaceable LED
Light Output: [e.g., 400 lumens] (Check packaging for specific value)
Color Temperature: [e.g., 2700K Warm White]
Power Consumption: [e.g., 5W]
Input Voltage: 120V AC, 60Hz
Cord Length: Approximately 5.9 ft (1.8 m)
Material: Steel, Plastic
Finish: Black/White (as per variant)

Controls and Operation

Operation is simple via the integrated switch.

To Turn On: Press or flip the switch on the power cord or base to the "I" or ON position.

To Turn Off: Press or flip the switch to the "O" or OFF position.

Adjustment:
1. Arm: Gently grasp the arm and bend it to the desired height and angle.
2. Head: Hold the lamp head and tilt it to direct the light beam precisely.

Note: This is a non-dimmable lamp. Do not connect to an external dimmer switch.

Positioning and Use

For optimal lighting and safety.

Place the lamp on a stable, level desk or table surface.
Adjust the arm and head so the light falls on your work area without shining directly into your eyes.
Ensure the power cord is positioned where it will not be a tripping hazard.
Do not place the lamp near the edge of the surface where it could be knocked over.

Tip: Position the lamp opposite your writing hand to minimize shadows.

Bulb Replacement

This lamp uses an integrated, non-user-replaceable LED module.

LED Lifespan: The LED is designed to last for thousands of hours under normal use.
If Light Fails: If the LED fails before the end of its expected lifespan, the entire lamp head or unit may need to be replaced. Do not attempt to open the lamp head.

WARNING! The LED module is not serviceable. Disconnect from power before any inspection. Do not attempt to repair.

Care & Cleaning

Unplug the lamp from the electrical outlet before cleaning.

Use a soft, dry or slightly damp cloth to wipe the exterior surfaces (base, arm, head).
For stubborn marks, use a mild soap solution. Do not use abrasive cleaners or solvents.
Ensure the lamp is completely dry before plugging it back in.

CAUTION! Never immerse the lamp, cord, or plug in water or other liquids.

Safety Information

This lamp is intended for indoor use only.
Use only with 120V, 60Hz AC power.
Do not use the lamp if the cord or plug is damaged.
Do not place the lamp near flammable materials or heat sources.
Do not hang objects on the lamp or use it for any purpose other than intended.
Keep away from children who might pull on the cord or tip the lamp over.

Complies with relevant safety standards.

Warranty & Support

IKEA products are covered by a limited warranty. Refer to the IKEA warranty document included with your purchase or available at IKEA stores for specific terms and duration.

For product support, assembly help, or spare parts:
Visit: www.ikea.com
Contact your local IKEA store.
Have the article number (105.497.77) and receipt ready.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Faulty switch	Check that the plug is firmly in the outlet. Try a different outlet. Ensure the switch is in the ON position.
Lamp is unstable/wobbly	Assembly not tight / Uneven surface	Check that the arm is fully inserted and locked into the base. Ensure the lamp is on a flat, level surface.
Arm/head will not hold position	Joint tension too loose	Check if there is an adjustment knob or screw at the joint and tighten it slightly. Do not overtighten.
LED flickers or is dim	Loose connection / End of life	Check all assembly connections. If problem persists, the integrated LED may be failing.
Lamp gets warm	Normal operation	Some warmth is normal during use. It should not become excessively hot to the touch.

Disposal: Dispose of this product in accordance with local electronic waste (e-waste) regulations. Do not dispose of with household trash.