IKEA FLOALT 203.030.63 Light Panel instructions manual

The IKEA FLOALT 203.030.63 is a modern LED light panel designed for wall or ceiling mounting, featuring a dimmable white spectrum (warm to cool white), touch control, and a minimalist design. It requires connection to a compatible IKEA TRÅDFRI driver for operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power & Driver 7. Using the Light Panel 8. Smart Features & Integration 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED light panel, Mounting brackets, Connection cables, Touch control surface.

FeatureDescription
LED PanelDimmable white light spectrum, adjustable color temperature
Touch ControlOn/Off, dimming, and white spectrum adjustment via touch
MountingDesigned for wall or ceiling installation
Driver ConnectionRequires compatible IKEA TRÅDFRI driver (sold separately)
DesignMinimalist, flat panel design with slim profile
Power InputLow voltage via driver connection

Installation

Unpack and inspect contents. Ensure you have the compatible TRÅDFRI driver.

  1. Choose location: Select wall or ceiling location away from heat sources and moisture.
  2. Mount brackets: Use provided screws to attach mounting brackets to surface.
  3. Attach panel: Secure light panel to mounted brackets.
  4. Connect to driver: Use provided cable to connect panel to TRÅDFRI driver.
  5. Connect driver to power: Plug driver into standard electrical outlet.

WARNING! Installation should be performed by a qualified person. Ensure power is off during installation.

First-Time Setup

After installation, power on the driver and configure the light.

  1. Power on: Ensure driver is connected to power and switched on.
  2. Touch control: Tap the touch surface to turn on the light.
  3. Adjust brightness: Touch and hold to dim or brighten.
  4. Adjust white spectrum: Double-tap to cycle through white light temperatures (warm to cool).
  5. Pair with remote (optional): If using TRÅDFRI remote, follow pairing instructions in remote manual.

CAUTION! Do not touch the LED surface during extended operation as it may become warm.

Specifications

Controls and Settings

All control is via the integrated touch surface or through a paired TRÅDFRI remote/gateway.

Touch Control: Single tap: On/Off. Touch and hold: Dim up/down. Double tap: Cycle white spectrum.

Via TRÅDFRI System: If paired with TRÅDFRI remote or gateway, use the remote or IKEA Home Smart app to control on/off, dimming, white spectrum, and set schedules or scenes.

Settings: No user-serviceable settings inside the panel. All configuration is via the connected driver or TRÅDFRI system.

Connecting to Power & Driver

This light panel must be used with the specified IKEA TRÅDFRI driver.

  1. Ensure driver is unplugged from mains power.
  2. Connect the panel's cable to the driver's output port.
  3. Securely mount the driver in a ventilated location.
  4. Plug the driver into a standard wall outlet.
  5. Switch on power at the outlet.

Tip: Use only the IKEA TRÅDFRI driver designed for this product. Do not connect directly to mains voltage.

Using the Light Panel

Basic operation via touch control.

  1. Turn On/Off: Single tap on the touch surface.
  2. Adjust Brightness: Touch and hold the surface. Light dims down, release, then touch and hold again to brighten.
  3. Change White Tone: Double-tap to cycle through preset white light temperatures from warm to cool white.
  4. Turn Off Remotely: If paired, use TRÅDFRI remote or app.

WARNING! The surface is touch-sensitive. Ensure hands are dry. Do not use sharp objects.

Smart Features & Integration

When used with the TRÅDFRI gateway and IKEA Home Smart app.

App Control: Group lights, set schedules, create scenes, and control away from home.

Voice Control: Compatible with Amazon Alexa, Google Assistant, and Apple HomeKit via the TRÅDFRI gateway.

Pairing: To pair with a new remote or gateway, bring the remote/gateway close to the light and follow the pairing procedure in the remote/gateway manual.

Care & Cleaning

Disconnect from power before cleaning.

  1. Use a soft, dry, lint-free cloth to gently wipe the panel surface.
  2. For stubborn marks, slightly dampen the cloth with water. Do not let moisture enter any openings.
  3. Do not use chemical cleaners, abrasives, or solvents.

CAUTION! Never immerse the light panel or driver in water or other liquids.

Regulatory Information

This product complies with applicable EU directives and standards. The symbol of the crossed-out wheeled bin indicates separate collection for electrical and electronic equipment. For disposal, follow local regulations. IKEA and TRÅDFRI are trademarks of Inter IKEA Systems B.V. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

SymptomPossible CauseCorrective Action
Light does not turn onNo power / Driver issueCheck if driver is plugged in and outlet has power. Ensure connection between panel and driver is secure.
Touch control not respondingDirty surface / PowerClean touch surface with dry cloth. Ensure driver is powered.
Light flickersLoose connection / Driver faultCheck all cable connections. Try resetting the driver by unplugging for 30 seconds.
Cannot change white spectrumControl modeDouble-tap quickly. If paired to a remote set to a fixed color, use the remote to change spectrum.
Not pairing with remote/gatewayDistance / ProcedureBring remote/gateway very close to the light. Repeat pairing procedure exactly.

Reset: To factory reset the light for pairing, turn the light on and off 6 times in quick succession (using the touch control). The light will flash once to confirm.

Service: For defective products, contact IKEA customer service or return to your local IKEA store.

IKEA FLOALT 203.030.63 Light Panel instructions manual © - All Rights Reserved 2025