IKEA FLISAT 802.907.79 Bench instructions manual

The IKEA FLISAT Bench is a versatile, sturdy wooden bench designed for children's rooms, play areas, or entryways. It features a simple, modern design with a smooth finish, easy assembly with included hardware, and a weight capacity suitable for children and light adult use. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Care & Maintenance 6. Usage Guidelines 7. Troubleshooting 8. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present and undamaged.

Part NameQuantityDescription
Bench Seat1Main wooden seat panel
Bench Legs4Solid wooden legs
Support Rails2Horizontal rails for stability
Wooden Dowels8For joining parts
Cam Lock Nuts4For securing connections
Cam Lock Screws4To tighten cam locks
Allen Key1Tool for assembly
Instruction Manual1This document

Safety Information

Read all instructions before assembly and use.

  1. Assemble on a clean, flat surface with adequate space.
  2. Keep small hardware away from children during assembly.
  3. Ensure all connections are tight and secure before use.
  4. Do not exceed the maximum weight limit of 110 lbs (50 kg).
  5. Place bench on a level, stable floor to prevent tipping.

WARNING! Improper assembly or overloading can cause injury or damage. Use only IKEA-provided hardware.

Assembly Instructions

Follow steps in order. Allow approximately 20-30 minutes for assembly.

  1. Step 1: Lay the bench seat upside down on a soft surface to avoid scratches.
  2. Step 2: Insert wooden dowels into the pre-drilled holes on the underside of the seat.
  3. Step 3: Attach the two support rails to the seat using the dowels, aligning the holes.
  4. Step 4: Attach the legs to the support rails. Insert dowels into leg holes, then connect to rails.
  5. Step 5: Secure all connections using the cam lock nuts and screws. Tighten with the provided Allen key.
  6. Step 6: Turn the bench upright and place it on a level surface. Check stability by applying gentle pressure.

Tip: Do not overtighten screws, as this may strip the wood. Ensure cam locks are fully engaged.

Specifications

Care & Maintenance

To maintain appearance and longevity:

  1. Wipe with a damp cloth and mild detergent. Dry immediately.
  2. Avoid abrasive cleaners, solvents, or excessive water.
  3. Protect from direct sunlight and extreme humidity to prevent warping.
  4. Periodically check and tighten hardware to ensure stability.

CAUTION! Do not use wax or polish, as this may make the surface slippery.

Usage Guidelines

Designed for indoor use only.

Troubleshooting

IssuePossible CauseSolution
Bench wobblesUneven floor or loose hardwareCheck floor level; tighten all cam locks and screws.
Legs not aligningDowels not fully insertedDisassemble and reinsert dowels completely before reattaching.
Cam lock not tighteningScrew not engaged properlyLoosen, align cam lock with screw head, and retighten.
Scratches on surfaceAssembly on hard surfaceAssemble on carpet or soft blanket; use touch-up paint if needed.
Weight limit exceededOverloadingReduce load to under 110 lbs. Inspect for stress damage.

Warranty & Support

IKEA offers a limited warranty against manufacturing defects. For warranty claims, retain your receipt.

Contact: Visit IKEA customer service in-store or online at www.ikea.com.

Phone: 1-888-888-4532

Replacement Parts: Available free of charge within warranty period.

IKEA FLISAT 802.907.79 Bench instructions manual © - All Rights Reserved 2025