IKEA FLISAT 102.984.20 Storage instructions manual

The IKEA FLISAT 102.984.20 is a versatile storage unit designed for children's rooms, featuring a durable construction, multiple compartments for organization, and a child-friendly design. It helps keep toys, books, and art supplies tidy while encouraging independence. Below are key sections for safety, assembly, features, usage, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Parts and Hardware 6. Usage Guidelines 7. Organization Tips 8. Safety Features 9. Care & Cleaning 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Solid wood frame, multiple storage compartments, removable bins, smooth-gliding drawers, rounded edges for safety, and a neutral finish.

FeatureDescription
Solid wood constructionMade from sustainable solid wood for durability
Multiple compartmentsIncludes open shelves, drawers, and removable bins
Removable binsEasy to clean and rearrange for flexible storage
Smooth-gliding drawersEquipped with stoppers to prevent full extension
Rounded edgesChild-safe design to minimize injury risks
Neutral finishFits various room decors; easy to wipe clean
Modular designCan be combined with other FLISAT units
Weight capacityEach shelf supports up to 15 lbs (6.8 kg)
DimensionsWidth: 31.5" (80 cm), Height: 29.5" (75 cm), Depth: 11.8" (30 cm)
Recommended ageFor children 3 years and older

Assembly Instructions

Unpack and verify all parts. Assemble on a clean, flat surface.

  1. Check contents: Refer to the parts list; ensure all screws, dowels, and panels are present.
  2. Assemble frame: Connect side panels to top and bottom using provided dowels and screws.
  3. Attach shelves: Insert shelves into designated slots; secure with screws from underneath.
  4. Install drawers: Attach drawer fronts to drawer boxes; insert glides into frame channels.
  5. Add bins: Place removable bins into open compartments.
  6. Secure to wall: Use included wall attachment device to prevent tipping.

WARNING! Furniture tipping can cause serious injury. Always secure to wall using provided hardware.

First-Time Setup

After assembly, position unit and organize contents.

  1. Choose location: Place on a level floor away from heat sources and direct sunlight.
  2. Secure to wall: Attach anti-tip bracket to wall stud; connect to unit with screws.
  3. Load compartments: Distribute weight evenly; place heavier items on lower shelves.
  4. Test drawers and bins: Ensure smooth operation; adjust if necessary.

CAUTION! Do not place unit near radiators or in humid areas to prevent warping.

Specifications

Parts and Hardware

Included components: Panels, shelves, drawers, bins, screws, dowels, wall attachment device, Allen key.

Panel List: Side panels (2), top panel (1), bottom panel (1), back panel (1), shelf panels (3), drawer fronts (2), drawer boxes (2).

Hardware: Wooden dowels (12), screws (various lengths), wall attachment bracket (1), wall screws (2), drawer glides (4).

Tools Needed: Allen key (included); Phillips screwdriver (not included).

Usage Guidelines

Designed for storing toys, books, art supplies, and lightweight items.

  1. Weight limits: Do not exceed 15 lbs per shelf; 30 lbs total for entire unit.
  2. Drawer use: Open one drawer at a time; avoid pulling forcefully.
  3. Bin removal: Lift bins straight up; do not tilt when full.
  4. Avoid moisture: Keep liquids away to prevent damage.
  5. Child supervision: Teach children proper use; discourage climbing.

Tip: Label bins or drawers with pictures for easy identification by young children.

Organization Tips

Maximize storage with these suggestions.

  1. Categorize items: Group similar items (e.g., blocks, dolls, books).
  2. Use bins for small items: Prevent loss of small toys like LEGO® pieces.
  3. Rotate toys: Store less-used items on higher shelves; rotate periodically.
  4. Accessibility: Place frequently used items at child’s eye level.
  5. Safety check: Regularly inspect for loose screws or sharp edges.

WARNING! Do not store heavy, sharp, or hazardous items. Keep cords and strings out of reach.

Safety Features

Rounded edges, anti-tip wall attachment, drawer stoppers, non-toxic finish.

Wall Attachment: MUST be installed to prevent tipping. Use included bracket and screws.

Drawer Stoppers: Prevent drawers from being pulled out completely.

Finish: Non-toxic acrylic paint; safe for children.

Age Recommendation: For children 3 years and older due to small parts risk.

Care & Cleaning

Use a damp cloth with mild soap; dry immediately. Avoid abrasive cleaners.

  1. Daily dusting: Use a soft, dry cloth.
  2. Stain removal: Dampen cloth with water and mild detergent; wipe gently.
  3. Avoid solvents: Do not use alcohol, acetone, or abrasive pads.
  4. Check hardware: Tighten screws periodically to maintain stability.

CAUTION! Do not soak or submerge; avoid steam cleaners. Keep away from direct heat.

Warranty Information

IKEA offers a 10-year limited warranty against manufacturing defects under normal household use. Warranty covers structural integrity and hardware. Not covered: Damage from improper assembly, accidents, modifications, or commercial use. For warranty claims, contact IKEA customer service with proof of purchase. For support, visit www.ikea.com or call 1-888-888-4532.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit wobblesUneven floor or loose screwsCheck floor level; tighten all screws and wall attachment.
Drawer sticksMisaligned glides or overloadRemove drawer; realign glides; reduce weight.
Shelf sagsExcess weightRemove items; do not exceed 15 lbs per shelf.
Bins difficult to removeOverfilled or misalignedRemove some contents; ensure bin is seated properly.
Scratches or dentsImpact or sharp objectsUse touch-up paint (available from IKEA); avoid dragging items.

Replacement Parts: Contact IKEA for missing or damaged parts; provide article number 102.984.20.

Service: 1-888-888-4532; www.ikea.com

IKEA FLISAT 102.984.20 Storage instructions manual © - All Rights Reserved 2025